Re: [PATCH v2] usb: ucsi: stm32: fix command completion handling

[Heikki Krogerus]

On Wed, Jun 12, 2024 at 02:46:56PM +0200, Fabrice Gasnier wrote:
> Sometimes errors are seen, when doing DR swap, like:
> [   24.672481] ucsi-stm32g0-i2c 0-0035: UCSI_GET_PDOS failed (-5)
> [   24.720188] ucsi-stm32g0-i2c 0-0035: ucsi_handle_connector_change:
>  GET_CONNECTOR_STATUS failed (-5)
> 
> There may be some race, which lead to read CCI, before the command complete
> flag is set, hence returning -EIO. Similar fix has been done also in
> ucsi_acpi [1].
> 
> In case of a spurious or otherwise delayed notification it is
> possible that CCI still reports the previous completion. The
> UCSI spec is aware of this and provides two completion bits in
> CCI, one for normal commands and one for acks. As acks and commands
> alternate the notification handler can determine if the completion
> bit is from the current command.
> 
> To fix this add the ACK_PENDING bit for ucsi_stm32g0 and only complete
> commands if the completion bit matches.
> 
> [1] https://lore.kernel.org/lkml/20240121204123.275441-3-lk@xxxxxxx/
> 
> Fixes: 72849d4fcee7 ("usb: typec: ucsi: stm32g0: add support for stm32g0 controller")
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>

Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>

> ---
> Changes in v2: rebase and define ACK_PENDING as commented by Dmitry.
> ---
>  drivers/usb/typec/ucsi/ucsi_stm32g0.c | 19 +++++++++++++++----
>  1 file changed, 15 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
> index ac48b7763114..ac69288e8bb0 100644
> --- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c
> +++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
> @@ -65,6 +65,7 @@ struct ucsi_stm32g0 {
>  	struct device *dev;
>  	unsigned long flags;
>  #define COMMAND_PENDING	1
> +#define ACK_PENDING	2
>  	const char *fw_name;
>  	struct ucsi *ucsi;
>  	bool suspended;
> @@ -396,9 +397,13 @@ static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const
>  				   size_t len)
>  {
>  	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
> +	bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI;
>  	int ret;
>  
> -	set_bit(COMMAND_PENDING, &g0->flags);
> +	if (ack)
> +		set_bit(ACK_PENDING, &g0->flags);
> +	else
> +		set_bit(COMMAND_PENDING, &g0->flags);
>  
>  	ret = ucsi_stm32g0_async_write(ucsi, offset, val, len);
>  	if (ret)
> @@ -406,9 +411,14 @@ static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const
>  
>  	if (!wait_for_completion_timeout(&g0->complete, msecs_to_jiffies(5000)))
>  		ret = -ETIMEDOUT;
> +	else
> +		return 0;
>  
>  out_clear_bit:
> -	clear_bit(COMMAND_PENDING, &g0->flags);
> +	if (ack)
> +		clear_bit(ACK_PENDING, &g0->flags);
> +	else
> +		clear_bit(COMMAND_PENDING, &g0->flags);
>  
>  	return ret;
>  }
> @@ -429,8 +439,9 @@ static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data)
>  	if (UCSI_CCI_CONNECTOR(cci))
>  		ucsi_connector_change(g0->ucsi, UCSI_CCI_CONNECTOR(cci));
>  
> -	if (test_bit(COMMAND_PENDING, &g0->flags) &&
> -	    cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))
> +	if (cci & UCSI_CCI_ACK_COMPLETE && test_and_clear_bit(ACK_PENDING, &g0->flags))
> +		complete(&g0->complete);
> +	if (cci & UCSI_CCI_COMMAND_COMPLETE && test_and_clear_bit(COMMAND_PENDING, &g0->flags))
>  		complete(&g0->complete);
>  
>  	return IRQ_HANDLED;
> -- 
> 2.25.1

-- 
heikki