Re: [PATCH v3 03/10] mfd: support ROHM BD96801 PMIC core

From: Lee Jones
Date: Thu Jun 13 2024 - 12:15:22 EST

Next message: Bart Van Assche: "Re: [PATCH RFC -next 0/7] blk-iocost: support to build iocost as kernel module"
Previous message: Keith Busch: "Re: [PATCH 1/2] list: introduce a new cutting helper"
Next in thread: Matti Vaittinen: "Re: [PATCH v3 03/10] mfd: support ROHM BD96801 PMIC core"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, 04 Jun 2024, Matti Vaittinen wrote:

> The ROHM BD96801 PMIC is highly customizable automotive grade PMIC
> which integrates regulator and watchdog funtionalities.
>
> Provide INTB IRQ and register accesses for regulator/watchdog drivers.
>
> Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
>
> ---
> Changelog:
> v2 =>:
> - No changes
>
> v1 => v2:
> - Drop unused enum
> - Improve error prints
> - improve comments
>
> RFCv2 => v1:
> - drop ERRB interrupts (for now)
> - bd96801: Unlock registers in core driver
>
> Changelog: RFCv1 => RFCv2
> - Work-around the IRQ domain name conflict
> - Add watchdog IRQ
> - Various styling fixes based on review by Lee
> ---
> drivers/mfd/Kconfig | 13 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/rohm-bd96801.c | 273 +++++++++++++++++++++++++++++++
> include/linux/mfd/rohm-bd96801.h | 215 ++++++++++++++++++++++++
> include/linux/mfd/rohm-generic.h | 1 +
> 5 files changed, 503 insertions(+)
> create mode 100644 drivers/mfd/rohm-bd96801.c
> create mode 100644 include/linux/mfd/rohm-bd96801.h

Pretty nice. Uses generic interfaces. Just a couple of nits.

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 266b4f54af60..68cc7af9ef97 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -2089,6 +2089,19 @@ config MFD_ROHM_BD957XMUF
> BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily
> designed to be used to power R-Car series processors.
>
> +config MFD_ROHM_BD96801
> + tristate "ROHM BD96801 Power Management IC"
> + depends on I2C=y
> + depends on OF
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + select MFD_CORE
> + help
> + Select this option to get support for the ROHM BD96801 Power
> + Management IC. The ROHM BD96801 is a highly scalable Power Management
> + IC for industrial and automotive use. The BD96801 can be used as a
> + master PMIC in a chained PMIC solution with suitable companion PMICs.
> +
> config MFD_STM32_LPTIMER
> tristate "Support for STM32 Low-Power Timer"
> depends on (ARCH_STM32 && OF) || COMPILE_TEST
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index c66f07edcd0e..e792892d4a8b 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -264,6 +264,7 @@ obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
> obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o
> obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
> obj-$(CONFIG_MFD_ROHM_BD957XMUF) += rohm-bd9576.o
> +obj-$(CONFIG_MFD_ROHM_BD96801) += rohm-bd96801.o
> obj-$(CONFIG_MFD_STMFX) += stmfx.o
> obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
> obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o
> diff --git a/drivers/mfd/rohm-bd96801.c b/drivers/mfd/rohm-bd96801.c
> new file mode 100644
> index 000000000000..1c2a9591be7b
> --- /dev/null
> +++ b/drivers/mfd/rohm-bd96801.c
> @@ -0,0 +1,273 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2024 ROHM Semiconductors
> + *
> + * ROHM BD96801 PMIC driver
> + *
> + * This version of the "BD86801 scalable PMIC"'s driver supports only very
> + * basic set of the PMIC features. Most notably, there is no support for
> + * the ERRB interrupt and the configurations which should be done when the
> + * PMIC is in STBY mode.
> + *
> + * Supporting the ERRB interrupt would require dropping the regmap-IRQ
> + * usage or working around (or accepting a presense of) a naming conflict
> + * in debugFS IRQs.
> + *
> + * Being able to reliably do the configurations like changing the
> + * regulator safety limits (like limits for the over/under -voltages, over
> + * current, thermal protection) would require the configuring driver to be
> + * synchronized with entity causing the PMIC state transitions. Eg, one
> + * should be able to ensure the PMIC is in STBY state when the
> + * configurations are applied to the hardware. How and when the PMIC state
> + * transitions are to be done is likely to be very system specific, as will
> + * be the need to configure these safety limits. Hence it's not simple to
> + * come up with a generic solution.
> + *
> + * Users who require the ERRB handling and STBY state configurations can
> + * have a look at the original RFC:
> + * https://lore.kernel.org/all/cover.1712920132.git.mazziesaccount@xxxxxxxxx/
> + * which implements a workaround to debugFS naming conflict and some of
> + * the safety limit configurations - but leaves the state change handling
> + * and synchronization to be implemented.
> + *
> + * It would be great to hear (and receive a patch!) if you implement the
> + * STBY configuration support or a proper fix to the debugFS naming
> + * conflict in your downstream driver ;)
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +
> +#include <linux/mfd/rohm-bd96801.h>
> +#include <linux/mfd/rohm-generic.h>

Nit: '\n'

> +static const struct resource regulator_intb_irqs[] = {
> + DEFINE_RES_IRQ_NAMED(BD96801_TW_STAT, "bd96801-core-thermal"),
> +
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPH_STAT, "bd96801-buck1-overcurr-h"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPL_STAT, "bd96801-buck1-overcurr-l"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPN_STAT, "bd96801-buck1-overcurr-n"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OVD_STAT, "bd96801-buck1-overvolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_UVD_STAT, "bd96801-buck1-undervolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_TW_CH_STAT, "bd96801-buck1-thermal"),
> +
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPH_STAT, "bd96801-buck2-overcurr-h"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPL_STAT, "bd96801-buck2-overcurr-l"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPN_STAT, "bd96801-buck2-overcurr-n"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OVD_STAT, "bd96801-buck2-overvolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_UVD_STAT, "bd96801-buck2-undervolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_TW_CH_STAT, "bd96801-buck2-thermal"),
> +
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPH_STAT, "bd96801-buck3-overcurr-h"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPL_STAT, "bd96801-buck3-overcurr-l"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPN_STAT, "bd96801-buck3-overcurr-n"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OVD_STAT, "bd96801-buck3-overvolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_UVD_STAT, "bd96801-buck3-undervolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_TW_CH_STAT, "bd96801-buck3-thermal"),
> +
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPH_STAT, "bd96801-buck4-overcurr-h"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPL_STAT, "bd96801-buck4-overcurr-l"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPN_STAT, "bd96801-buck4-overcurr-n"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OVD_STAT, "bd96801-buck4-overvolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_UVD_STAT, "bd96801-buck4-undervolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_TW_CH_STAT, "bd96801-buck4-thermal"),
> +
> + DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OCPH_STAT, "bd96801-ldo5-overcurr"),
> + DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OVD_STAT, "bd96801-ldo5-overvolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_LDO5_UVD_STAT, "bd96801-ldo5-undervolt"),
> +
> + DEFINE_RES_IRQ_NAMED(BD96801_LDO6_OCPH_STAT, "bd96801-ldo6-overcurr"),
> + DEFINE_RES_IRQ_NAMED(BD96801_LDO6_OVD_STAT, "bd96801-ldo6-overvolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_LDO6_UVD_STAT, "bd96801-ldo6-undervolt"),
> +
> + DEFINE_RES_IRQ_NAMED(BD96801_LDO7_OCPH_STAT, "bd96801-ldo7-overcurr"),
> + DEFINE_RES_IRQ_NAMED(BD96801_LDO7_OVD_STAT, "bd96801-ldo7-overvolt"),
> + DEFINE_RES_IRQ_NAMED(BD96801_LDO7_UVD_STAT, "bd96801-ldo7-undervolt"),
> +};
> +
> +static const struct resource wdg_intb_irqs[] = {
> + DEFINE_RES_IRQ_NAMED(BD96801_WDT_ERR_STAT, "bd96801-wdg"),
> +};
> +
> +static struct mfd_cell bd96801_mfd_cells[] = {

This is an MFD driver, you can drop the 'mfd_' part.

> + {
> + .name = "bd96801-wdt",
> + .resources = wdg_intb_irqs,
> + .num_resources = ARRAY_SIZE(wdg_intb_irqs),
> + }, {
> + .name = "bd96801-pmic",

I thought this was the PMIC?

What is this device? Regulators?

"bd96801-regulator"?

> + .resources = regulator_intb_irqs,
> + .num_resources = ARRAY_SIZE(regulator_intb_irqs),
> + },
> +};
> +
> +static const struct regmap_range bd96801_volatile_ranges[] = {
> + /* Status registers */
> + regmap_reg_range(BD96801_REG_WD_FEED, BD96801_REG_WD_FAILCOUNT),
> + regmap_reg_range(BD96801_REG_WD_ASK, BD96801_REG_WD_ASK),
> + regmap_reg_range(BD96801_REG_WD_STATUS, BD96801_REG_WD_STATUS),
> + regmap_reg_range(BD96801_REG_PMIC_STATE, BD96801_REG_INT_LDO7_INTB),
> + /* Registers which do not update value unless PMIC is in STBY */
> + regmap_reg_range(BD96801_REG_SSCG_CTRL, BD96801_REG_SHD_INTB),
> + regmap_reg_range(BD96801_REG_BUCK_OVP, BD96801_REG_BOOT_OVERTIME),
> + /*
> + * LDO control registers have single bit (LDO MODE) which does not
> + * change when we write it unless PMIC is in STBY. It's safer to not
> + * cache it.
> + */
> + regmap_reg_range(BD96801_LDO5_VOL_LVL_REG, BD96801_LDO7_VOL_LVL_REG),
> +};
> +
> +static const struct regmap_access_table volatile_regs = {
> + .yes_ranges = bd96801_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(bd96801_volatile_ranges),
> +};
> +
> +static const struct regmap_irq bd96801_intb_irqs[] = {
> + /* STATUS SYSTEM INTB */
> + REGMAP_IRQ_REG(BD96801_TW_STAT, 0, BD96801_TW_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_WDT_ERR_STAT, 0, BD96801_WDT_ERR_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_I2C_ERR_STAT, 0, BD96801_I2C_ERR_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_CHIP_IF_ERR_STAT, 0, BD96801_CHIP_IF_ERR_STAT_MASK),
> + /* STATUS BUCK1 INTB */
> + REGMAP_IRQ_REG(BD96801_BUCK1_OCPH_STAT, 1, BD96801_BUCK_OCPH_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK1_OCPL_STAT, 1, BD96801_BUCK_OCPL_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK1_OCPN_STAT, 1, BD96801_BUCK_OCPN_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK1_OVD_STAT, 1, BD96801_BUCK_OVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK1_UVD_STAT, 1, BD96801_BUCK_UVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK1_TW_CH_STAT, 1, BD96801_BUCK_TW_CH_STAT_MASK),
> + /* BUCK 2 INTB */
> + REGMAP_IRQ_REG(BD96801_BUCK2_OCPH_STAT, 2, BD96801_BUCK_OCPH_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK2_OCPL_STAT, 2, BD96801_BUCK_OCPL_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK2_OCPN_STAT, 2, BD96801_BUCK_OCPN_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK2_OVD_STAT, 2, BD96801_BUCK_OVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK2_UVD_STAT, 2, BD96801_BUCK_UVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK2_TW_CH_STAT, 2, BD96801_BUCK_TW_CH_STAT_MASK),
> + /* BUCK 3 INTB */
> + REGMAP_IRQ_REG(BD96801_BUCK3_OCPH_STAT, 3, BD96801_BUCK_OCPH_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK3_OCPL_STAT, 3, BD96801_BUCK_OCPL_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK3_OCPN_STAT, 3, BD96801_BUCK_OCPN_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK3_OVD_STAT, 3, BD96801_BUCK_OVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK3_UVD_STAT, 3, BD96801_BUCK_UVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK3_TW_CH_STAT, 3, BD96801_BUCK_TW_CH_STAT_MASK),
> + /* BUCK 4 INTB */
> + REGMAP_IRQ_REG(BD96801_BUCK4_OCPH_STAT, 4, BD96801_BUCK_OCPH_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK4_OCPL_STAT, 4, BD96801_BUCK_OCPL_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK4_OCPN_STAT, 4, BD96801_BUCK_OCPN_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK4_OVD_STAT, 4, BD96801_BUCK_OVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK4_UVD_STAT, 4, BD96801_BUCK_UVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_BUCK4_TW_CH_STAT, 4, BD96801_BUCK_TW_CH_STAT_MASK),
> + /* LDO5 INTB */
> + REGMAP_IRQ_REG(BD96801_LDO5_OCPH_STAT, 5, BD96801_LDO_OCPH_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_LDO5_OVD_STAT, 5, BD96801_LDO_OVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_LDO5_UVD_STAT, 5, BD96801_LDO_UVD_STAT_MASK),
> + /* LDO6 INTB */
> + REGMAP_IRQ_REG(BD96801_LDO6_OCPH_STAT, 6, BD96801_LDO_OCPH_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_LDO6_OVD_STAT, 6, BD96801_LDO_OVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_LDO6_UVD_STAT, 6, BD96801_LDO_UVD_STAT_MASK),
> + /* LDO7 INTB */
> + REGMAP_IRQ_REG(BD96801_LDO7_OCPH_STAT, 7, BD96801_LDO_OCPH_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_LDO7_OVD_STAT, 7, BD96801_LDO_OVD_STAT_MASK),
> + REGMAP_IRQ_REG(BD96801_LDO7_UVD_STAT, 7, BD96801_LDO_UVD_STAT_MASK),
> +};
> +
> +static struct regmap_irq_chip bd96801_irq_chip_intb = {
> + .name = "bd96801-irq-intb",
> + .main_status = BD96801_REG_INT_MAIN,
> + .num_main_regs = 1,
> + .irqs = &bd96801_intb_irqs[0],
> + .num_irqs = ARRAY_SIZE(bd96801_intb_irqs),
> + .status_base = BD96801_REG_INT_SYS_INTB,
> + .mask_base = BD96801_REG_MASK_SYS_INTB,
> + .ack_base = BD96801_REG_INT_SYS_INTB,
> + .init_ack_masked = true,
> + .num_regs = 8,
> + .irq_reg_stride = 1,
> +};
> +
> +static const struct regmap_config bd96801_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .volatile_table = &volatile_regs,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int bd96801_i2c_probe(struct i2c_client *i2c)
> +{
> + struct regmap_irq_chip_data *intb_irq_data;
> + const struct fwnode_handle *fwnode;
> + struct irq_domain *intb_domain;
> + struct regmap *regmap;
> + int ret, intb_irq;
> +
> + fwnode = dev_fwnode(&i2c->dev);
> + if (!fwnode)
> + return dev_err_probe(&i2c->dev, -EINVAL, "Failed to find fwnode\n");
> +
> + intb_irq = fwnode_irq_get_byname(fwnode, "intb");
> + if (intb_irq < 0)
> + return dev_err_probe(&i2c->dev, intb_irq, "INTB IRQ not configured\n");
> +
> + regmap = devm_regmap_init_i2c(i2c, &bd96801_regmap_config);
> + if (IS_ERR(regmap))
> + return dev_err_probe(&i2c->dev, PTR_ERR(regmap),
> + "Regmap initialization failed\n");
> +
> + ret = regmap_write(regmap, BD96801_LOCK_REG, BD96801_UNLOCK);
> + if (ret)
> + return dev_err_probe(&i2c->dev, ret, "Failed to unlock PMIC\n");
> +
> + ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, intb_irq,
> + IRQF_ONESHOT, 0, &bd96801_irq_chip_intb,
> + &intb_irq_data);
> + if (ret)
> + return dev_err_probe(&i2c->dev, ret, "Failed to add INTB IRQ chip\n");
> +
> + intb_domain = regmap_irq_get_domain(intb_irq_data);
> +
> + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
> + bd96801_mfd_cells,
> + ARRAY_SIZE(bd96801_mfd_cells), NULL, 0,
> + intb_domain);
> +

Remove this line.

> + if (ret)
> + dev_err(&i2c->dev, "Failed to create subdevices\n");
> +
> + return ret;
> +}
> +
> +static const struct of_device_id bd96801_of_match[] = {
> + { .compatible = "rohm,bd96801", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, bd96801_of_match);
> +
> +static struct i2c_driver bd96801_i2c_driver = {
> + .driver = {
> + .name = "rohm-bd96801",
> + .of_match_table = bd96801_of_match,
> + },
> + .probe = bd96801_i2c_probe,
> +};
> +
> +static int __init bd96801_i2c_init(void)
> +{
> + return i2c_add_driver(&bd96801_i2c_driver);
> +}
> +
> +/* Initialise early so consumer devices can complete system boot */
> +subsys_initcall(bd96801_i2c_init);
> +
> +static void __exit bd96801_i2c_exit(void)
> +{
> + i2c_del_driver(&bd96801_i2c_driver);
> +}
> +module_exit(bd96801_i2c_exit);
> +
> +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("ROHM BD96801 Power Management IC driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/rohm-bd96801.h b/include/linux/mfd/rohm-bd96801.h
> new file mode 100644
> index 000000000000..e2d9e10b6364
> --- /dev/null
> +++ b/include/linux/mfd/rohm-bd96801.h
> @@ -0,0 +1,215 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/* Copyright (C) 2024 ROHM Semiconductors */
> +
> +#ifndef __MFD_BD96801_H__
> +#define __MFD_BD96801_H__
> +
> +#define BD96801_REG_SSCG_CTRL 0x09
> +#define BD96801_REG_SHD_INTB 0x20
> +#define BD96801_LDO5_VOL_LVL_REG 0x2c
> +#define BD96801_LDO6_VOL_LVL_REG 0x2d
> +#define BD96801_LDO7_VOL_LVL_REG 0x2e
> +#define BD96801_REG_BUCK_OVP 0x30
> +#define BD96801_REG_BUCK_OVD 0x35
> +#define BD96801_REG_LDO_OVP 0x31
> +#define BD96801_REG_LDO_OVD 0x36
> +#define BD96801_REG_BOOT_OVERTIME 0x3a
> +#define BD96801_REG_WD_TMO 0x40
> +#define BD96801_REG_WD_CONF 0x41
> +#define BD96801_REG_WD_FEED 0x42
> +#define BD96801_REG_WD_FAILCOUNT 0x43
> +#define BD96801_REG_WD_ASK 0x46
> +#define BD96801_REG_WD_STATUS 0x4a
> +#define BD96801_REG_PMIC_STATE 0x4f
> +#define BD96801_REG_EXT_STATE 0x50
> +
> +#define BD96801_STATE_STBY 0x09
> +
> +#define BD96801_LOCK_REG 0x04
> +#define BD96801_UNLOCK 0x9d
> +#define BD96801_LOCK 0x00
> +
> +/* IRQ register area */
> +#define BD96801_REG_INT_MAIN 0x51
> +
> +/*
> + * The BD96801 has two physical IRQ lines, INTB and ERRB.
> + *
> + * The 'main status register' is located at 0x51.
> + * The ERRB status registers are located at 0x52 ... 0x5B
> + * INTB status registers are at range 0x5c ... 0x63
> + */
> +#define BD96801_REG_INT_SYS_ERRB1 0x52
> +#define BD96801_REG_INT_SYS_INTB 0x5c
> +#define BD96801_REG_INT_LDO7_INTB 0x63
> +
> +/* MASK registers */
> +#define BD96801_REG_MASK_SYS_INTB 0x73
> +#define BD96801_REG_MASK_SYS_ERRB 0x69
> +
> +#define BD96801_MAX_REGISTER 0x7a
> +
> +#define BD96801_OTP_ERR_MASK BIT(0)
> +#define BD96801_DBIST_ERR_MASK BIT(1)
> +#define BD96801_EEP_ERR_MASK BIT(2)
> +#define BD96801_ABIST_ERR_MASK BIT(3)
> +#define BD96801_PRSTB_ERR_MASK BIT(4)
> +#define BD96801_DRMOS1_ERR_MASK BIT(5)
> +#define BD96801_DRMOS2_ERR_MASK BIT(6)
> +#define BD96801_SLAVE_ERR_MASK BIT(7)
> +#define BD96801_VREF_ERR_MASK BIT(0)
> +#define BD96801_TSD_ERR_MASK BIT(1)
> +#define BD96801_UVLO_ERR_MASK BIT(2)
> +#define BD96801_OVLO_ERR_MASK BIT(3)
> +#define BD96801_OSC_ERR_MASK BIT(4)
> +#define BD96801_PON_ERR_MASK BIT(5)
> +#define BD96801_POFF_ERR_MASK BIT(6)
> +#define BD96801_CMD_SHDN_ERR_MASK BIT(7)
> +#define BD96801_INT_PRSTB_WDT_ERR_MASK BIT(0)
> +#define BD96801_INT_CHIP_IF_ERR_MASK BIT(3)
> +#define BD96801_INT_SHDN_ERR_MASK BIT(7)
> +#define BD96801_OUT_PVIN_ERR_MASK BIT(0)
> +#define BD96801_OUT_OVP_ERR_MASK BIT(1)
> +#define BD96801_OUT_UVP_ERR_MASK BIT(2)
> +#define BD96801_OUT_SHDN_ERR_MASK BIT(7)
> +
> +/* ERRB IRQs */
> +enum {
> + /* Reg 0x52, 0x53, 0x54 - ERRB system IRQs */
> + BD96801_OTP_ERR_STAT,
> + BD96801_DBIST_ERR_STAT,
> + BD96801_EEP_ERR_STAT,
> + BD96801_ABIST_ERR_STAT,
> + BD96801_PRSTB_ERR_STAT,
> + BD96801_DRMOS1_ERR_STAT,
> + BD96801_DRMOS2_ERR_STAT,
> + BD96801_SLAVE_ERR_STAT,
> + BD96801_VREF_ERR_STAT,
> + BD96801_TSD_ERR_STAT,
> + BD96801_UVLO_ERR_STAT,
> + BD96801_OVLO_ERR_STAT,
> + BD96801_OSC_ERR_STAT,
> + BD96801_PON_ERR_STAT,
> + BD96801_POFF_ERR_STAT,
> + BD96801_CMD_SHDN_ERR_STAT,
> + BD96801_INT_PRSTB_WDT_ERR,
> + BD96801_INT_CHIP_IF_ERR,
> + BD96801_INT_SHDN_ERR_STAT,
> +
> + /* Reg 0x55 BUCK1 ERR IRQs */
> + BD96801_BUCK1_PVIN_ERR_STAT,
> + BD96801_BUCK1_OVP_ERR_STAT,
> + BD96801_BUCK1_UVP_ERR_STAT,
> + BD96801_BUCK1_SHDN_ERR_STAT,
> +
> + /* Reg 0x56 BUCK2 ERR IRQs */
> + BD96801_BUCK2_PVIN_ERR_STAT,
> + BD96801_BUCK2_OVP_ERR_STAT,
> + BD96801_BUCK2_UVP_ERR_STAT,
> + BD96801_BUCK2_SHDN_ERR_STAT,
> +
> + /* Reg 0x57 BUCK3 ERR IRQs */
> + BD96801_BUCK3_PVIN_ERR_STAT,
> + BD96801_BUCK3_OVP_ERR_STAT,
> + BD96801_BUCK3_UVP_ERR_STAT,
> + BD96801_BUCK3_SHDN_ERR_STAT,
> +
> + /* Reg 0x58 BUCK4 ERR IRQs */
> + BD96801_BUCK4_PVIN_ERR_STAT,
> + BD96801_BUCK4_OVP_ERR_STAT,
> + BD96801_BUCK4_UVP_ERR_STAT,
> + BD96801_BUCK4_SHDN_ERR_STAT,
> +
> + /* Reg 0x59 LDO5 ERR IRQs */
> + BD96801_LDO5_PVIN_ERR_STAT,
> + BD96801_LDO5_OVP_ERR_STAT,
> + BD96801_LDO5_UVP_ERR_STAT,
> + BD96801_LDO5_SHDN_ERR_STAT,
> +
> + /* Reg 0x5a LDO6 ERR IRQs */
> + BD96801_LDO6_PVIN_ERR_STAT,
> + BD96801_LDO6_OVP_ERR_STAT,
> + BD96801_LDO6_UVP_ERR_STAT,
> + BD96801_LDO6_SHDN_ERR_STAT,
> +
> + /* Reg 0x5b LDO7 ERR IRQs */
> + BD96801_LDO7_PVIN_ERR_STAT,
> + BD96801_LDO7_OVP_ERR_STAT,
> + BD96801_LDO7_UVP_ERR_STAT,
> + BD96801_LDO7_SHDN_ERR_STAT,
> +};
> +
> +/* INTB IRQs */
> +enum {
> + /* Reg 0x5c (System INTB) */
> + BD96801_TW_STAT,
> + BD96801_WDT_ERR_STAT,
> + BD96801_I2C_ERR_STAT,
> + BD96801_CHIP_IF_ERR_STAT,
> +
> + /* Reg 0x5d (BUCK1 INTB) */
> + BD96801_BUCK1_OCPH_STAT,
> + BD96801_BUCK1_OCPL_STAT,
> + BD96801_BUCK1_OCPN_STAT,
> + BD96801_BUCK1_OVD_STAT,
> + BD96801_BUCK1_UVD_STAT,
> + BD96801_BUCK1_TW_CH_STAT,
> +
> + /* Reg 0x5e (BUCK2 INTB) */
> + BD96801_BUCK2_OCPH_STAT,
> + BD96801_BUCK2_OCPL_STAT,
> + BD96801_BUCK2_OCPN_STAT,
> + BD96801_BUCK2_OVD_STAT,
> + BD96801_BUCK2_UVD_STAT,
> + BD96801_BUCK2_TW_CH_STAT,
> +
> + /* Reg 0x5f (BUCK3 INTB)*/
> + BD96801_BUCK3_OCPH_STAT,
> + BD96801_BUCK3_OCPL_STAT,
> + BD96801_BUCK3_OCPN_STAT,
> + BD96801_BUCK3_OVD_STAT,
> + BD96801_BUCK3_UVD_STAT,
> + BD96801_BUCK3_TW_CH_STAT,
> +
> + /* Reg 0x60 (BUCK4 INTB)*/
> + BD96801_BUCK4_OCPH_STAT,
> + BD96801_BUCK4_OCPL_STAT,
> + BD96801_BUCK4_OCPN_STAT,
> + BD96801_BUCK4_OVD_STAT,
> + BD96801_BUCK4_UVD_STAT,
> + BD96801_BUCK4_TW_CH_STAT,
> +
> + /* Reg 0x61 (LDO5 INTB) */
> + BD96801_LDO5_OCPH_STAT, /* bit [0] */
> + BD96801_LDO5_OVD_STAT, /* bit [3] */
> + BD96801_LDO5_UVD_STAT, /* bit [4] */
> +
> + /* Reg 0x62 (LDO6 INTB) */
> + BD96801_LDO6_OCPH_STAT, /* bit [0] */
> + BD96801_LDO6_OVD_STAT, /* bit [3] */
> + BD96801_LDO6_UVD_STAT, /* bit [4] */
> +
> + /* Reg 0x63 (LDO7 INTB) */
> + BD96801_LDO7_OCPH_STAT, /* bit [0] */
> + BD96801_LDO7_OVD_STAT, /* bit [3] */
> + BD96801_LDO7_UVD_STAT, /* bit [4] */
> +};
> +
> +/* IRQ MASKs */
> +#define BD96801_TW_STAT_MASK BIT(0)
> +#define BD96801_WDT_ERR_STAT_MASK BIT(1)
> +#define BD96801_I2C_ERR_STAT_MASK BIT(2)
> +#define BD96801_CHIP_IF_ERR_STAT_MASK BIT(3)
> +
> +#define BD96801_BUCK_OCPH_STAT_MASK BIT(0)
> +#define BD96801_BUCK_OCPL_STAT_MASK BIT(1)
> +#define BD96801_BUCK_OCPN_STAT_MASK BIT(2)
> +#define BD96801_BUCK_OVD_STAT_MASK BIT(3)
> +#define BD96801_BUCK_UVD_STAT_MASK BIT(4)
> +#define BD96801_BUCK_TW_CH_STAT_MASK BIT(5)
> +
> +#define BD96801_LDO_OCPH_STAT_MASK BIT(0)
> +#define BD96801_LDO_OVD_STAT_MASK BIT(3)
> +#define BD96801_LDO_UVD_STAT_MASK BIT(4)
> +
> +#endif
> diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
> index 4eeb22876bad..e7d4e6afe388 100644
> --- a/include/linux/mfd/rohm-generic.h
> +++ b/include/linux/mfd/rohm-generic.h
> @@ -16,6 +16,7 @@ enum rohm_chip_type {
> ROHM_CHIP_TYPE_BD71828,
> ROHM_CHIP_TYPE_BD71837,
> ROHM_CHIP_TYPE_BD71847,
> + ROHM_CHIP_TYPE_BD96801,
> ROHM_CHIP_TYPE_AMOUNT
> };
>
> --
> 2.45.1
>
>
> --
> Matti Vaittinen, Linux device drivers
> ROHM Semiconductors, Finland SWDC
> Kiviharjunlenkki 1E
> 90220 OULU
> FINLAND
>
> ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
> Simon says - in Latin please.
> ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
> Thanks to Simon Glass for the translation =]

--
Lee Jones [李琼斯]

Next message: Bart Van Assche: "Re: [PATCH RFC -next 0/7] blk-iocost: support to build iocost as kernel module"
Previous message: Keith Busch: "Re: [PATCH 1/2] list: introduce a new cutting helper"
Next in thread: Matti Vaittinen: "Re: [PATCH v3 03/10] mfd: support ROHM BD96801 PMIC core"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]