Re: [PATCH v2 6/8] dt-bindings: mfd: Add img,boston-platform-regs

[Rob Herring]

On Wed, Jun 12, 2024 at 12:56:25PM +0100, Jiaxun Yang wrote:
> This compatible has been used in arch/mips/boot/dts/img/boston.dts
> for a while but never documented properly.
> 
> Write a new binding for this device.
> This also covers old img,boston-clock binding so remove that binding.
> 
> Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/clock/img,boston-clock.txt | 31 ---------
>  .../bindings/mfd/img,boston-platform-regs.yaml     | 74 ++++++++++++++++++++++
>  2 files changed, 74 insertions(+), 31 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/img,boston-clock.txt b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
> deleted file mode 100644
> index 7bc5e9ffb624..000000000000
> --- a/Documentation/devicetree/bindings/clock/img,boston-clock.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -Binding for Imagination Technologies MIPS Boston clock sources.
> -
> -This binding uses the common clock binding[1].
> -
> -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -
> -The device node must be a child node of the syscon node corresponding to the
> -Boston system's platform registers.
> -
> -Required properties:
> -- compatible : Should be "img,boston-clock".
> -- #clock-cells : Should be set to 1.
> -  Values available for clock consumers can be found in the header file:
> -    <dt-bindings/clock/boston-clock.h>
> -
> -Example:
> -
> -	system-controller@17ffd000 {
> -		compatible = "img,boston-platform-regs", "syscon";
> -		reg = <0x17ffd000 0x1000>;
> -
> -		clk_boston: clock {
> -			compatible = "img,boston-clock";
> -			#clock-cells = <1>;
> -		};
> -	};
> -
> -	uart0: uart@17ffe000 {
> -		/* ... */
> -		clocks = <&clk_boston BOSTON_CLK_SYS>;
> -	};
> diff --git a/Documentation/devicetree/bindings/mfd/img,boston-platform-regs.yaml b/Documentation/devicetree/bindings/mfd/img,boston-platform-regs.yaml
> new file mode 100644
> index 000000000000..bf94de38a89f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/img,boston-platform-regs.yaml
> @@ -0,0 +1,74 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/img,boston-platform-regs.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Imagination Technologies Boston Platform Registers
> +
> +maintainers:
> +  - Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: img,boston-platform-regs
> +      - const: syscon
> +      - const: simple-mfd

Why did you add 'simple-mfd'? That's not what is in use.

> +
> +  reg:
> +    maxItems: 1
> +
> +  clock:

Really should be 'clock-controller', but if you don't plan to update the 
DTS, then it is fine as-is.

> +    type: object
> +
> +    description: Boston Clock Controller Device Node
> +      The clock consumer should specify the desired clock by having the clock
> +      ID in its "clocks" phandle cell.
> +      See include/dt-bindings/clock/boston-clock.h for the full list of boston
> +      clock IDs.
> +
> +    properties:
> +      "#clock-cells":
> +        const: 1
> +
> +      compatible:
> +        const: img,boston-clock
> +
> +    required:
> +      - "#clock-cells"
> +      - compatible
> +
> +    additionalProperties: false
> +
> +  syscon-reboot:

Just 'reboot'

> +    $ref: /schemas/power/reset/syscon-reboot.yaml#
> +
> +required:
> +  - compatible
> +  - reg
> +  - clock
> +  - syscon-reboot
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/boston-clock.h>
> +
> +    plat_regs: system-controller@17ffd000 {
> +      compatible = "img,boston-platform-regs", "syscon", "simple-mfd";
> +      reg = <0x17ffd000 0x1000>;
> +
> +      clk_boston: clock {
> +        compatible = "img,boston-clock";
> +        #clock-cells = <1>;
> +      };
> +
> +      reboot: syscon-reboot {
> +        compatible = "syscon-reboot";
> +        regmap = <&plat_regs>;
> +        offset = <0x10>;
> +        mask = <0x10>;
> +      };
> +    };
> 
> -- 
> 2.43.0
>