On 05/06/24 04:45, Nathan Morrisson wrote:
Hi Vignesh,Typical usage of overlay is to keep the minimum in baseboard and enable
On 6/3/24 10:41 AM, Vignesh Raghavendra wrote:
Hi Nathan,We have an EEPROM on our board with information on what is populated on
On 29/05/24 04:21, Nathan Morrisson wrote:
Add three overlays to disable the eth phy, rtc, and spi nor. TheseI am not sure if this a common practice to have overlays to disable
overlays will be used to disable device tree nodes for components
that are optionally not populated.
v2:
- Add build time tests in makefile
Nathan Morrisson (4):
arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label
arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy
arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc
arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disabl spi nor
arch/arm64/boot/dts/ti/Makefile | 17 +++++++++++++++++
.../boot/dts/ti/k3-am64-phycore-som.dtsi | 2 +-
.../ti/k3-am6xx-phycore-disable-eth-phy.dtso | 19 +++++++++++++++++++
.../dts/ti/k3-am6xx-phycore-disable-rtc.dtso | 15 +++++++++++++++
.../ti/k3-am6xx-phycore-disable-spi-nor.dtso | 15 +++++++++++++++
5 files changed, 67 insertions(+), 1 deletion(-)
create mode 100644
arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso
create mode 100644
arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso
create mode 100644
arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso
missing components (at least I dont see such dtso in kernel). I would
like to see an what DT maintainers feel as such dtsos can explode in
numbers.
Is this something that U-Boot can detect and fix up for the Linux DT?
that particular board. We will apply these overlays based on that EEPROM
data.
optional components in the overlay. But it would also depend on whats
information is present in the EEPROM.
Could you provide bit more color on whats in EEPROM and how each overlay
would be applied? Please add the same to commit message and respin.
Unpopulated SPI flash and RTC should ideally not be an issue as driversThey are not mutually exclusive, you could have any combination of
would gracefully fail albeit with some sort of error msg.
Not so sure about Eth PHYs though.
Also, Are these dtso's mutually exclusive? ie can SoM have SPI flash but
not RTC, have RTC and SPI Flash but no ETH PHY?
overlays applied.
Regards,
Nathan