Re: [PATCH] fec_main: Register net device before initializing the MDIO bus

[Paul Geurts]

> On Thu, Jun 13, 2024 at 04:41:11PM +0200, Paul Geurts wrote:
> > Registration of the FEC MDIO bus triggers a probe of all devices
> > connected to that bus. DSA based Ethernet switch devices connect to the
> > uplink Ethernet port during probe. When a DSA based, MDIO controlled
> > Ethernet switch is connected to FEC, it cannot connect the uplink port,
> > as the FEC MDIO port is registered before the net device is being
> > registered. This causes an unnecessary defer of the Ethernet switch
> > driver probe.
> > 
> > Register the net device before initializing and registering the MDIO
> > bus.
> 
> The problem with this is, as soon as you call register_netdev(), the
> device is alive and sending packets. It can be sending packets even
> before register_netdev() returns, e.g. in the case of NFS root. So
> fec_enet_open() gets called, and tried to find its PHY. But the MDIO
> bus is not registered yet....

Valid argument there. I was trying to make the initialization more efficient,
but you are correct.

> 
> So yes, DSA ends up doing an EPROBE_DEFER cycle. Not much we can do
> about that. We can try to keep the DSA probe functions as cheap as
> possible, and put all the expensive stuff in setup(), which will only
> be called once we have all the needed resources.
> 
>     Andrew
> 
> ---
> pw-bot: cr
>