[PATCH v2] arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes

From: Abel Vesa
Date: Fri Jun 14 2024 - 06:50:35 EST

Next message: Pankaj Raghav (Samsung): "[PATCH 0/2] improve buffered write performance with fgf order hint"
Previous message: Fabio Estevam: "Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>

Add tsens and thermal zones nodes for x1e80100 SoC.

Signed-off-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
Changes in v2:
- Dropped the thermal engine nodes.
- Dropped comments from tsens nodes.
- Droppd the polling-delay entirely and polling-delay-passive where not
necessary.
- Added top/bottom location to all sensors (where applicable).
- Fixed trip points with duplicate values for same temp.
- Marked as critical the 125°C throughout all trip points.
- Link to v1: https://lore.kernel.org/r/20240527-x1e80100-dts-thermal-v1-1-ea13b8fa6ffc@xxxxxxxxxx
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1176 ++++++++++++++++++++++++++++++++
1 file changed, 1176 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 9944c654851e..df13df7967db 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2505,6 +2505,66 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
};
};

+ tsens0: thermal-sensor@c271000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c271000 0 0x1000>,
+ <0 0x0c222000 0 0x1000>;
+
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c272000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c272000 0 0x1000>,
+ <0 0x0c223000 0 0x1000>;
+
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens2: thermal-sensor@c273000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c273000 0 0x1000>,
+ <0 0x0c224000 0 0x1000>;
+
+ interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens3: thermal-sensor@c274000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c274000 0 0x1000>,
+ <0 0x0c225000 0 0x1000>;
+
+ interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
usb_1_ss0_hsphy: phy@fd3000 {
compatible = "qcom,x1e80100-snps-eusb2-phy",
"qcom,sm8550-snps-eusb2-phy";
@@ -5469,4 +5529,1120 @@ timer {
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
+
+ thermal-zones {
+ aoss0-thermal {
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-0-top-thermal {
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-0-bottom-thermal {
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-1-top-thermal {
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-1-bottom-thermal {
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-2-top-thermal {
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-2-bottom-thermal {
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-3-top-thermal {
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-3-bottom-thermal {
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-top-thermal {
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-bottom-thermal {
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ mem-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-0-top-thermal {
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-0-bottom-thermal {
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-1-top-thermal {
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-1-bottom-thermal {
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-2-top-thermal {
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-2-bottom-thermal {
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-3-top-thermal {
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-3-bottom-thermal {
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-top-thermal {
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-bottom-thermal {
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss2-thermal {
+ thermal-sensors = <&tsens2 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-0-top-thermal {
+ thermal-sensors = <&tsens2 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-0-bottom-thermal {
+ thermal-sensors = <&tsens2 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-1-top-thermal {
+ thermal-sensors = <&tsens2 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-1-bottom-thermal {
+ thermal-sensors = <&tsens2 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-2-top-thermal {
+ thermal-sensors = <&tsens2 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-2-bottom-thermal {
+ thermal-sensors = <&tsens2 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-3-top-thermal {
+ thermal-sensors = <&tsens2 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-3-bottom-thermal {
+ thermal-sensors = <&tsens2 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss2-top-thermal {
+ thermal-sensors = <&tsens2 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss2-bottom-thermal {
+ thermal-sensors = <&tsens2 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss3-thermal {
+ thermal-sensors = <&tsens3 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp0-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsp0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp1-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsp1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp2-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsp2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp3-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsp3-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-0-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-1-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-2-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-3-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-4-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-5-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-6-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-7-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera0-thermal {
+ thermal-sensors = <&tsens3 13>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ camera0-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera1-thermal {
+ thermal-sensors = <&tsens3 14>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ camera0-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
};

---
base-commit: 6906a84c482f098d31486df8dc98cead21cce2d0
change-id: 20240109-x1e80100-dts-thermal-47db566a60bc

Best regards,
--
Abel Vesa <abel.vesa@xxxxxxxxxx>

Next message: Pankaj Raghav (Samsung): "[PATCH 0/2] improve buffered write performance with fgf order hint"
Previous message: Fabio Estevam: "Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]