[PATCH net-next v3 1/7] net: ethtool: pse-pd: Expand C33 PSE status with class, power and extended state
From: Kory Maincent
Date: Fri Jun 14 2024 - 10:33:58 EST
From: Kory Maincent (Dent Project) <kory.maincent@xxxxxxxxxxx>
This update expands the status information provided by ethtool for PSE c33.
It includes details such as the detected class, current power delivered,
and extended state information.
Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx>
---
Change in v2:
- Move on PSE string error messages to ETHTOOL_LINK_EXT_STATE and
ETHTOOL_LINK_EXT_SUBSTATE with fixed enumeration in aim to unify
interface diagnostic.
Change in v3:
- Add ethtool netlink documentation and kdoc.
- Move on to u32 for state and substate.
- Update C33 pse extended state and substate following Oleksij proposal
---
Documentation/networking/ethtool-netlink.rst | 37 +++++
include/linux/ethtool.h | 16 ++
include/linux/pse-pd/pse.h | 8 +
include/uapi/linux/ethtool.h | 212 +++++++++++++++++++++++++++
include/uapi/linux/ethtool_netlink.h | 4 +
net/ethtool/pse-pd.c | 29 +++-
6 files changed, 305 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 160bfb0ae8ba..7dbf2ef3ac0e 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -1730,6 +1730,13 @@ Kernel response contents:
PSE functions.
``ETHTOOL_A_C33_PSE_PW_D_STATUS`` u32 power detection status of the
PoE PSE.
+ ``ETHTOOL_A_C33_PSE_PW_CLASS`` u32 power class of the PoE PSE.
+ ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` u32 actual power drawn on the
+ PoE PSE.
+ ``ETHTOOL_A_C33_PSE_EXT_STATE`` u32 power extended state of the
+ PoE PSE.
+ ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` u32 power extended substatus of
+ the PoE PSE.
====================================== ====== =============================
When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
@@ -1762,6 +1769,36 @@ The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS`` implementing
.. kernel-doc:: include/uapi/linux/ethtool.h
:identifiers: ethtool_c33_pse_pw_d_status
+When set, the optional ``ETHTOOL_A_C33_PSE_PW_CLASS`` attribute identifies
+the power class of the C33 PSE. It depends on the class negotiated between
+the PSE and the PD. This option is corresponding to ``IEEE 802.3-2022``
+30.9.1.1.8 aPSEPowerClassification.
+
+When set, the optional ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` attribute identifies
+This option is corresponding to ``IEEE 802.3-2022`` 30.9.1.1.23 aPSEActualPower.
+Actual power is reported in mW.
+
+When set, the optional ``ETHTOOL_A_C33_PSE_EXT_STATE`` attribute identifies
+the extended error state of the C33 PSE. Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_c33_pse_ext_state
+
+When set, the optional ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` attribute identifies
+the extended error state of the C33 PSE. Possible values are:
+Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_c33_pse_ext_substate_class_num_events
+ ethtool_c33_pse_ext_substate_error_condition
+ ethtool_c33_pse_ext_substate_mr_pse_enable
+ ethtool_c33_pse_ext_substate_option_detect_ted
+ ethtool_c33_pse_ext_substate_option_vport_lim
+ ethtool_c33_pse_ext_substate_ovld_detected
+ ethtool_c33_pse_ext_substate_pd_dll_power_type
+ ethtool_c33_pse_ext_substate_power_not_available
+ ethtool_c33_pse_ext_substate_short_detected
+
PSE_SET
=======
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 6fd9107d3cc0..38a07e7a71d4 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -1155,4 +1155,20 @@ struct ethtool_forced_speed_map {
void
ethtool_forced_speed_maps_init(struct ethtool_forced_speed_map *maps, u32 size);
+
+/* C33 PSE extended state and substate. */
+struct ethtool_c33_pse_ext_state_info {
+ enum ethtool_c33_pse_ext_state c33_pse_ext_state;
+ union {
+ enum ethtool_c33_pse_ext_substate_error_condition error_condition;
+ enum ethtool_c33_pse_ext_substate_mr_pse_enable mr_pse_enable;
+ enum ethtool_c33_pse_ext_substate_option_detect_ted option_detect_ted;
+ enum ethtool_c33_pse_ext_substate_option_vport_lim option_vport_lim;
+ enum ethtool_c33_pse_ext_substate_ovld_detected ovld_detected;
+ enum ethtool_c33_pse_ext_substate_pd_dll_power_type pd_dll_power_type;
+ enum ethtool_c33_pse_ext_substate_power_not_available power_not_available;
+ enum ethtool_c33_pse_ext_substate_short_detected short_detected;
+ u32 __c33_pse_ext_substate;
+ };
+};
#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h
index 6eec24ffa866..38b9308e5e7a 100644
--- a/include/linux/pse-pd/pse.h
+++ b/include/linux/pse-pd/pse.h
@@ -36,12 +36,20 @@ struct pse_control_config {
* functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState
* @c33_pw_status: power detection status of the PSE.
* IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus:
+ * @c33_pw_class: detected class of a powered PD
+ * IEEE 802.3-2022 30.9.1.1.8 aPSEPowerClassification
+ * @c33_actual_pw: power currently delivered by the PSE in mW
+ * IEEE 802.3-2022 30.9.1.1.23 aPSEActualPower
+ * @c33_ext_state_info: extended state information of the PSE
*/
struct pse_control_status {
enum ethtool_podl_pse_admin_state podl_admin_state;
enum ethtool_podl_pse_pw_d_status podl_pw_status;
enum ethtool_c33_pse_admin_state c33_admin_state;
enum ethtool_c33_pse_pw_d_status c33_pw_status;
+ u32 c33_pw_class;
+ u32 c33_actual_pw;
+ struct ethtool_c33_pse_ext_state_info c33_ext_state_info;
};
/**
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 8733a3117902..5bf8cfc4e9ad 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -752,6 +752,218 @@ enum ethtool_module_power_mode {
ETHTOOL_MODULE_POWER_MODE_HIGH,
};
+/**
+ * enum ethtool_c33_pse_ext_state - groups of PSE extended states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_STATE_CLASS_NUM_EVENTS: Group of class_num_events states
+ * @ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states
+ * @ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted
+ * states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states
+ * @ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type
+ * states
+ * @ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available
+ * states
+ * @ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states
+ */
+enum ethtool_c33_pse_ext_state {
+ ETHTOOL_C33_PSE_EXT_STATE_CLASS_NUM_EVENTS = 1,
+ ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE,
+ ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED,
+ ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM,
+ ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED,
+ ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE,
+ ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE,
+ ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_class_num_events - class_num_events states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_CLASS_NUM_EVENTS_CLASS_ERROR: Illegal class
+ *
+ * class_num_events is variable indicating the number of classification events
+ * performed by the PSE. A variable that is set in an implementation-dependent
+ * manner.
+ */
+enum ethtool_c33_pse_ext_substate_class_num_events {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_CLASS_NUM_EVENTS_CLASS_ERROR = 1,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_error_condition - error_condition states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing
+ * port number
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal
+ * hardware fault
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON:
+ * Communication error after force on
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown
+ * port status
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host
+ * crash turn off
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN:
+ * Host crash force shutdown
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_UNDERLOAD: Underload
+ * state
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration
+ * change
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over
+ * temperature detected
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONNECTION_OPEN: Port is
+ * not connected
+ *
+ * error_condition is a variable indicating the status of
+ * implementation-specific fault conditions or optionally other system faults
+ * that prevent the PSE from meeting the specifications in Table 33–11 and that
+ * require the PSE not to source power. These error conditions are different
+ * from those monitored by the state diagrams in Figure 33–10.
+ */
+enum ethtool_c33_pse_ext_substate_error_condition {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT = 1,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_UNDERLOAD,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONNECTION_OPEN,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_mr_pse_enable - mr_pse_enable states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable
+ * pin active
+ *
+ * mr_pse_enable is control variable that selects PSE operation and test
+ * functions.
+ */
+enum ethtool_c33_pse_ext_substate_mr_pse_enable {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE = 1,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_option_detect_ted - option_detect_ted
+ * states functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection
+ * in process
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_IMPROPER_CAP_DET: Improper
+ * capacitor Detection
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR:
+ * Connection check error
+ *
+ * option_detect_ted is a variable indicating if detection can be performed
+ * by the PSE during the ted_timer interval.
+ */
+enum ethtool_c33_pse_ext_substate_option_detect_ted {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS = 1,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_IMPROPER_CAP_DET,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_option_vport_lim - option_vport_lim states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply
+ * voltage is high
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply
+ * voltage is low
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage
+ * injection into the port
+ *
+ * option_vport_lim is an optional variable indicates if VPSE is out of the
+ * operating range during normal operating state.
+ */
+enum ethtool_c33_pse_ext_substate_option_vport_lim {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE = 1,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_ovld_detected - ovld_detected states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state
+ *
+ * ovld_detected is a variable indicating if the PSE output current has been
+ * in an overload condition (see 33.2.7.6) for at least TCUT of a one-second
+ * sliding time.
+ */
+enum ethtool_c33_pse_ext_substate_ovld_detected {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD = 1,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_pd_dll_power_type - pd_dll_power_type
+ * states functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_PD_DLL_POWER_TYPE_NON_802_3AF_AT_DEVICE:
+ * Non-802.3AF/AT powered device
+ *
+ * pd_dll_power_type is a control variable initially output by the PSE power
+ * control state diagram (Figure 33–27), which can be updated by LLDP
+ * (see Table 33–26), that indicates the type of PD as advertised through
+ * Data Link Layer classification.
+ */
+enum ethtool_c33_pse_ext_substate_pd_dll_power_type {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_PD_DLL_POWER_TYPE_NON_802_3AF_AT_DEVICE = 1,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_power_not_available - power_not_available
+ * states functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power
+ * budget exceeded
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PM_STATIC: Power
+ * Management-Static
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PM_STATIC_OVL: Power
+ * Management-Static-ovl
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power
+ * denied due to Hardware power limit
+ *
+ * power_not_available is a variable that is asserted in an
+ * implementation-dependent manner when the PSE is no longer capable of
+ * sourcing sufficient power to support the attached PD. Sufficient power
+ * is defined by classification; see 33.2.6.
+ */
+enum ethtool_c33_pse_ext_substate_power_not_available {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED = 1,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PM_STATIC,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PM_STATIC_OVL,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_short_detected - short_detected states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short
+ * condition was detected
+ *
+ * short_detected is a variable indicating if the PSE output current has been
+ * in a short circuit condition for TLIM within a sliding window (see 33.2.7.7).
+ */
+enum ethtool_c33_pse_ext_substate_short_detected {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION = 1,
+};
+
/**
* enum ethtool_pse_types - Types of PSE controller.
* @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index b49b804b9495..398a0aa8daad 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -915,6 +915,10 @@ enum {
ETHTOOL_A_C33_PSE_ADMIN_STATE, /* u32 */
ETHTOOL_A_C33_PSE_ADMIN_CONTROL, /* u32 */
ETHTOOL_A_C33_PSE_PW_D_STATUS, /* u32 */
+ ETHTOOL_A_C33_PSE_PW_CLASS, /* u32 */
+ ETHTOOL_A_C33_PSE_ACTUAL_PW, /* u32 */
+ ETHTOOL_A_C33_PSE_EXT_STATE, /* u32 */
+ ETHTOOL_A_C33_PSE_EXT_SUBSTATE, /* u32 */
/* add new constants above here */
__ETHTOOL_A_PSE_CNT,
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index 2c981d443f27..fec56db557d3 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -86,7 +86,14 @@ static int pse_reply_size(const struct ethnl_req_info *req_base,
len += nla_total_size(sizeof(u32)); /* _C33_PSE_ADMIN_STATE */
if (st->c33_pw_status > 0)
len += nla_total_size(sizeof(u32)); /* _C33_PSE_PW_D_STATUS */
-
+ if (st->c33_pw_class > 0)
+ len += nla_total_size(sizeof(u32)); /* _C33_PSE_PW_CLASS */
+ if (st->c33_actual_pw > 0)
+ len += nla_total_size(sizeof(u32)); /* _C33_PSE_ACTUAL_PW */
+ if (st->c33_ext_state_info.c33_pse_ext_state > 0)
+ len += nla_total_size(sizeof(u32)); /* _C33_PSE_EXT_STATE */
+ if (st->c33_ext_state_info.__c33_pse_ext_substate > 0)
+ len += nla_total_size(sizeof(u32)); /* _C33_PSE_EXT_SUBSTATE */
return len;
}
@@ -117,6 +124,26 @@ static int pse_fill_reply(struct sk_buff *skb,
st->c33_pw_status))
return -EMSGSIZE;
+ if (st->c33_pw_class > 0 &&
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_PW_CLASS,
+ st->c33_pw_class))
+ return -EMSGSIZE;
+
+ if (st->c33_actual_pw > 0 &&
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_ACTUAL_PW,
+ st->c33_actual_pw))
+ return -EMSGSIZE;
+
+ if (st->c33_ext_state_info.c33_pse_ext_state > 0 &&
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_EXT_STATE,
+ st->c33_ext_state_info.c33_pse_ext_state))
+ return -EMSGSIZE;
+
+ if (st->c33_ext_state_info.__c33_pse_ext_substate > 0 &&
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_EXT_SUBSTATE,
+ st->c33_ext_state_info.__c33_pse_ext_substate))
+ return -EMSGSIZE;
+
return 0;
}
--
2.34.1