Re: [PATCH RFC 3/3] arm64: dts: amlogic: add clock and clock-names to sound cards

From: Jerome Brunet
Date: Fri Jun 14 2024 - 13:11:11 EST

Next message: Lee Jones: "Re: (subset) [PATCH v3] mfd: axp20x: AXP717: Fix missing IRQ status registers range"
Previous message: Alex Bee: "Re: [PATCH v3 1/4] drm/panel: jd9365da: Modify the method of sending commands"
In reply to: Neil Armstrong: "[PATCH RFC 3/3] arm64: dts: amlogic: add clock and clock-names to sound cards"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri 14 Jun 2024 at 18:24, Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:

> Add the missing clocks and clock-names in the sound card nodes
> according the the AXG and GX sound card bindings changes.
>
> It solved the following errors:
> sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
> sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
> from schema $id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml#
> sound: 'anyOf' conditional failed, one must be fixed:
> 'clocks' is a required property
> '#clock-cells' is a required property
> from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 4 ++++
> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts | 4 ++++
> 48 files changed, 192 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> index 7ed526f45175..2228ed88b977 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> @@ -268,6 +268,10 @@ sound {
> "Speaker1 Right", "SPK1 OUT_D",
> "Linein AINL", "Linein",
> "Linein AINR", "Linein";
> + clocks = <&clkc CLKID_HIFI_PLL>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_HIFI_PLL>,

Here the HiFi PLL shows the naming is kind of odd.
As explained in the bindings, I don't think is useful.

For the record, on AXG the HiFi PLL works well and should be used.

On G12/SM1 there is slight instabily with the HiFi - probably similar to
the one affecting the SYS PLL / DVFS. It can be used with a small hack
but it is safer to use the MPLL2 instead.

> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> index af211d8f3952..0bd298920191 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> @@ -176,6 +176,10 @@ sound {
> "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
> "SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
> index 15b9bc280706..b44c0802d47c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
> @@ -138,6 +138,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> index 61cb8135a392..3ddd0e2c4710 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> @@ -201,6 +201,10 @@ sound {
> "TODDR_B IN 1", "TDMIN_B OUT",
> "TODDR_C IN 1", "TDMIN_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> index 0e239939ade6..42ac5dcdb19d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> @@ -238,6 +238,10 @@ sound {
> "Lineout", "10U2 OUTL",
> "Lineout", "10U2 OUTR";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> index 05c7a1e3f1b7..0ee32d7bceae 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> @@ -158,6 +158,10 @@ sound {
> "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
> "SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
> index 13d478f9c891..cdc9d387d9be 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
> @@ -70,6 +70,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
> index 003efed529ba..0af7ba8ec896 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
> @@ -79,6 +79,10 @@ sound {
> "LINPUT1", "Mic Jack",
> "Mic Jack", "MICB";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> index 6a346cb86a53..5136b062e19a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> @@ -194,6 +194,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
> index bb73e10b5e74..8356b881fb31 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
> @@ -48,6 +48,10 @@ sound {
> "TDMOUT_A IN 2", "FRDDR_C OUT 1",
> "TDM_A Playback", "TDMOUT_A OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
> index 6eeedd54ab91..cc1156a225c1 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
> @@ -49,6 +49,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
> index 0da386cabe1a..4d1ef4d98391 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
> @@ -37,6 +37,10 @@ sound {
> "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
> "SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> index eed2a23047ca..c58e551b0e95 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> @@ -234,6 +234,10 @@ sound {
> "Internal Speakers", "Speaker Amplifier OUTL",
> "Internal Speakers", "Speaker Amplifier OUTR";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> index d80dd9a3da31..1f4674bbebda 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> @@ -71,6 +71,10 @@ sound {
> "Lineout", "U19 OUTL",
> "Lineout", "U19 OUTR";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
> index e26f3e3258e1..058453f547b4 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
> @@ -39,6 +39,10 @@ sound {
> "TODDR_B IN 6", "TDMIN_LB OUT",
> "TODDR_C IN 6", "TDMIN_LB OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> index 8445701100d0..bf434fcee31d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> @@ -176,6 +176,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
> index 6396f190d703..0ad35693ccb3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
> @@ -32,6 +32,10 @@ sound {
> "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
> "SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
> index efd662a452e8..db76787386ac 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
> @@ -194,6 +194,10 @@ sound {
> "AU2 INR", "ACODEC LORN",
> "7J4-14 LEFT", "AU2 OUTL",
> "7J4-11 RIGHT", "AU2 OUTR";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> index 08d6b69ba469..4e2cbd9d60f2 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> @@ -129,6 +129,10 @@ sound {
> "AU2 INR", "ACODEC LORN",
> "Lineout", "AU2 OUTL",
> "Lineout", "AU2 OUTR";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> index f28452b9f00f..01c47d1545b8 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> @@ -45,6 +45,10 @@ button-reset {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "KII-PRO";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
> index 1fd2e56e6b08..a7a2767a42a1 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
> @@ -135,6 +135,10 @@ hdmi_connector_in: endpoint {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "NANOPI-K2";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> index cca129ce2c58..8c01a43e4e7a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> @@ -142,6 +142,10 @@ hdmi_connector_in: endpoint {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "NEXBOX-A95X";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index c37cc6b036cd..6a794f72544d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -177,6 +177,10 @@ hdmi_connector_in: endpoint {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "ODROID-C2";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
> index 7f94716876d3..3ba3681fe3ba 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
> @@ -68,6 +68,10 @@ button-menu {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "P200";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
> index 6f81eed83bec..32e1c272052e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
> @@ -17,6 +17,10 @@ / {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "P201";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> index 255e93a0b36d..cbb847b8d5fe 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> @@ -108,6 +108,10 @@ sdio_pwrseq: sdio-pwrseq {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "VEGA-S95";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
> index af9ea32a2876..b5b0ced8ecff 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
> @@ -16,6 +16,10 @@ / {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "WETEK-HUB";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
> index 376760d86766..29749b053e1e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
> @@ -48,6 +48,10 @@ button {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "WETEK-PLAY2";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
> index 90ef9c17d80b..6aef181ca2ce 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
> @@ -123,6 +123,10 @@ sound {
> "Speaker", "9J5-2 RIGHT";
> audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
> "9J5-2 RIGHT", "ACODEC LORN";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
> index 08a4718219b1..fdc387c9b202 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
> @@ -128,6 +128,10 @@ sound {
> "AU2 INR", "ACODEC LORN",
> "Lineout", "AU2 OUTL",
> "Lineout", "AU2 OUTR";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> index fea65f20523a..065a7fc9d2fc 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> @@ -67,6 +67,10 @@ hdmi_connector_in: endpoint {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "KHADAS-VIM";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
> index 63b20860067c..2fe5c6686657 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
> @@ -160,6 +160,10 @@ vcc_1v8: regulator-vcc-1v8 {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "LIBRETECH-CC-V2";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> index 8b26c9661be1..4b40794721fd 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> @@ -142,6 +142,10 @@ sound {
> "AU2 INR", "ACODEC LORN",
> "Lineout", "AU2 OUTL",
> "Lineout", "AU2 OUTR";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9b4ea6a49398..98c6251142c4 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -50,6 +50,10 @@ sound {
> "AU2 INR", "ACODEC LORN",
> "Lineout", "AU2 OUTL",
> "Lineout", "AU2 OUTR";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
> index 07e7c3bedea0..d97fca396e0e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
> @@ -150,6 +150,10 @@ wifi32k: wifi32k {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "KHADAS-VIM2";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> index ad2dd4ad0a31..71ee228781fe 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> @@ -86,6 +86,10 @@ hdmi_connector_in: endpoint {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "NEXBOX-A1";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
> index d05dde8da5c5..81387968f51d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
> @@ -101,6 +101,10 @@ sdio_pwrseq: sdio-pwrseq {
> sound {
> compatible = "amlogic,gx-sound-card";
> model = "RBOX-PRO";
> + clocks = <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>,
> <&clkc CLKID_MPLL2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> index e78cc9b577a0..bd4ffc07e456 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> @@ -182,6 +182,10 @@ sound {
> "TODDR_B IN 0", "TDMIN_A OUT",
> "TODDR_C IN 0", "TDMIN_A OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
> index 082b72703cdf..746ce70b545b 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
> @@ -200,6 +200,10 @@ sound {
> <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
> <&dioo2133>;
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
> index 9b2eb6e42651..4cca62ddd04a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
> @@ -22,6 +22,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
> index 6e34fd80ed71..4a2aef4948ff 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
> @@ -22,6 +22,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
> index 586034316ec3..3203280bffe7 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
> @@ -22,6 +22,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
> index f045bf851638..6db7c5ccdbbc 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
> @@ -57,6 +57,10 @@ sound {
> "Lineout", "ACODEC LOLP",
> "Lineout", "ACODEC LORP";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
> index e6e9410d40cb..918ace039da6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
> @@ -22,6 +22,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> index 951eb8e3f0c0..44d2346482a5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> @@ -174,6 +174,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> index 3581e14cbf18..19b712e45066 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> @@ -239,6 +239,10 @@ sound {
> "TODDR_B IN 1", "TDMIN_B OUT",
> "TODDR_C IN 1", "TDMIN_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> index fc9b961133cd..c913af910208 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> @@ -22,6 +22,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
> index 9ea969255b4f..49978855c2d9 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
> @@ -22,6 +22,10 @@ sound {
> "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> "TDM_B Playback", "TDMOUT_B OUT";
>
> + clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + clock-names = "mpll0", "mpll1", "mpll2";
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;

--
Jerome

Next message: Lee Jones: "Re: (subset) [PATCH v3] mfd: axp20x: AXP717: Fix missing IRQ status registers range"
Previous message: Alex Bee: "Re: [PATCH v3 1/4] drm/panel: jd9365da: Modify the method of sending commands"
In reply to: Neil Armstrong: "[PATCH RFC 3/3] arm64: dts: amlogic: add clock and clock-names to sound cards"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]