[PATCH v1 3/4] ata: libata-scsi: Report valid sense data for ATA PT if present

[Igor Pylypiv]

Do not generate sense data from ATA status/error registers
if valid sense data is already present.

Signed-off-by: Igor Pylypiv <ipylypiv@xxxxxxxxxx>
---
 drivers/ata/libata-scsi.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 79e8103ef3a9..4bfe47e7d266 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -858,12 +858,17 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
 	unsigned char *desc = sb + 8;
 	u8 sense_key, asc, ascq;
 
-	/*
-	 * Use ata_to_sense_error() to map status register bits
-	 * onto sense key, asc & ascq.
-	 */
-	if (qc->err_mask ||
-	    tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+	if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
+		/*
+		 * Do not generate sense data from ATA status/error
+		 * registers if valid sense data is already present.
+		 */
+	} else if (qc->err_mask ||
+		   tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+		/*
+		 * Use ata_to_sense_error() to map status register bits
+		 * onto sense key, asc & ascq.
+		 */
 		ata_to_sense_error(qc->ap->print_id, tf->status, tf->error,
 				   &sense_key, &asc, &ascq);
 		ata_scsi_set_sense(qc->dev, cmd, sense_key, asc, ascq);
-- 
2.45.2.627.g7a2c4fd464-goog