[net-next PATCH 2/2] net: ravb: Fix R-Car RX frame size limit

[Paul Barker]

The RX frame size limit should not be based on the current MTU setting.
Instead it should be based on the hardware capabilities.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
---
 drivers/net/ethernet/renesas/ravb_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 02cbf850bd85..481c854cb305 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -555,8 +555,10 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
 
 static void ravb_emac_init_rcar(struct net_device *ndev)
 {
+	struct ravb_private *priv = netdev_priv(ndev);
+
 	/* Receive frame limit set register */
-	ravb_write(ndev, ndev->mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN, RFLR);
+	ravb_write(ndev, priv->info->rx_max_frame_size + ETH_FCS_LEN, RFLR);
 
 	/* EMAC Mode: PAUSE prohibition; Duplex; RX Checksum; TX; RX */
 	ravb_write(ndev, ECMR_ZPF | ECMR_DM |
-- 
2.39.2