[PATCH 01/13] arm64: dts: rockchip: Increase VOP clk rate on RK3328

[Jonas Karlman]

The VOP on RK3328 needs to run at a higher rate in order to produce a
proper 3840x2160 signal.

Change to use 300MHz for VIO clk and 400MHz for VOP clk, same rates used
by vendor 4.4 kernel.

Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 07dcc949b899..b01efd6d042c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -850,8 +850,8 @@ cru: clock-controller@ff440000 {
 			<0>, <24000000>,
 			<24000000>, <24000000>,
 			<15000000>, <15000000>,
-			<100000000>, <100000000>,
-			<100000000>, <100000000>,
+			<300000000>, <100000000>,
+			<400000000>, <100000000>,
 			<50000000>, <100000000>,
 			<100000000>, <100000000>,
 			<50000000>, <50000000>,
-- 
2.45.2