[PATCH] arm64: dts: qcom: qdu1000: fix usb interrupts properties

[Komal Bajaj]

Update the usb interrupts properties to fix the following
bindings check errors:
usb@a6f8800: interrupt-names:0: 'pwr_event' was expected
        from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names:1: 'hs_phy_irq' was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names: ['hs_phy_irq', 'ss_phy_irq', 'dm_hs_phy_irq', 'dp_hs_phy_irq'] is too short
        from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#

Fixes: dd1bd5bf7420 ("arm64: dts: qcom: qdu1000: Add USB3 and PHY support")
Cc: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
Reported-by: kernel test robot <lkp@xxxxxxxxx>
Closes: https://lore.kernel.org/oe-kbuild-all/202406171241.YKuCm3SC-lkp@xxxxxxxxx/
Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 7a77f7a55498..5759b8fe55fb 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -976,13 +976,15 @@ usb_1: usb@a6f8800 {
 			assigned-clock-rates = <19200000>, <200000000>;

 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 9 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
-					  "dm_hs_phy_irq";
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";

 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			required-opps = <&rpmhpd_opp_nom>;
--
2.42.0