[PATCH v3 01/41] iio: accel: fxls8962af-core: Make use of regmap_set_bits(), regmap_clear_bits()

From: Trevor Gamblin
Date: Mon Jun 17 2024 - 10:33:07 EST


Instead of using regmap_update_bits() and passing the mask twice, use
regmap_set_bits().

Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
Signed-off-by: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
---
drivers/iio/accel/fxls8962af-core.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/accel/fxls8962af-core.c b/drivers/iio/accel/fxls8962af-core.c
index 4fbc01bda62e..d25e31613413 100644
--- a/drivers/iio/accel/fxls8962af-core.c
+++ b/drivers/iio/accel/fxls8962af-core.c
@@ -228,8 +228,8 @@ static int fxls8962af_power_off(struct fxls8962af_data *data)

static int fxls8962af_standby(struct fxls8962af_data *data)
{
- return regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
- FXLS8962AF_SENS_CONFIG1_ACTIVE, 0);
+ return regmap_clear_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
+ FXLS8962AF_SENS_CONFIG1_ACTIVE);
}

static int fxls8962af_active(struct fxls8962af_data *data)
@@ -785,9 +785,8 @@ static int fxls8962af_reset(struct fxls8962af_data *data)
unsigned int reg;
int ret;

- ret = regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
- FXLS8962AF_SENS_CONFIG1_RST,
- FXLS8962AF_SENS_CONFIG1_RST);
+ ret = regmap_set_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
+ FXLS8962AF_SENS_CONFIG1_RST);
if (ret)
return ret;

@@ -830,9 +829,8 @@ static int fxls8962af_buffer_postenable(struct iio_dev *indio_dev)
fxls8962af_standby(data);

/* Enable buffer interrupt */
- ret = regmap_update_bits(data->regmap, FXLS8962AF_INT_EN,
- FXLS8962AF_INT_EN_BUF_EN,
- FXLS8962AF_INT_EN_BUF_EN);
+ ret = regmap_set_bits(data->regmap, FXLS8962AF_INT_EN,
+ FXLS8962AF_INT_EN_BUF_EN);
if (ret)
return ret;

@@ -851,8 +849,8 @@ static int fxls8962af_buffer_predisable(struct iio_dev *indio_dev)
fxls8962af_standby(data);

/* Disable buffer interrupt */
- ret = regmap_update_bits(data->regmap, FXLS8962AF_INT_EN,
- FXLS8962AF_INT_EN_BUF_EN, 0);
+ ret = regmap_clear_bits(data->regmap, FXLS8962AF_INT_EN,
+ FXLS8962AF_INT_EN_BUF_EN);
if (ret)
return ret;


--
2.45.2