Re: [PATCH v3 0/4] Add overlays to disable optional hardware in k3-am6xx-phycore-som boards

[Wadim Egorov]

Am 14.06.24 um 01:07 schrieb Nathan Morrisson:
> Add three overlays to disable the eth phy, rtc, and spi nor. These
> overlays will be used to disable device tree nodes for components
> that are optionally not populated.
>
> v3:
>    - Explain the logic behind adding the overlays in commit messages

Looks like you forgot to pick up my Reviewed-by

https://lore.kernel.org/linux-arm-kernel/20240528225137.3629698-4-nmorrisson@xxxxxxxxxx/T/#me4ddd3a713c4ff65e36fad333d59979ef1a92e8f


> v2:
>    - Add build time tests in makefile
>
> Nathan Morrisson (4):
>    arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable spi nor
>
>   arch/arm64/boot/dts/ti/Makefile               | 17 +++++++++++++++++
>   .../boot/dts/ti/k3-am64-phycore-som.dtsi      |  2 +-
>   .../ti/k3-am6xx-phycore-disable-eth-phy.dtso  | 19 +++++++++++++++++++
>   .../dts/ti/k3-am6xx-phycore-disable-rtc.dtso  | 15 +++++++++++++++
>   .../ti/k3-am6xx-phycore-disable-spi-nor.dtso  | 15 +++++++++++++++
>   5 files changed, 67 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso