[PATCH v2 2/3] ARM: dts: qcom: msm8926-motorola-peregrine: Update temperature sensor

[André Apitzsch via B4 Relay]

From: André Apitzsch <git@xxxxxxxxxxx>

Add alert interrupt for the temperature sensor of Motorola Moto G 4G
(2013), although not used by the driver yet.

Signed-off-by: André Apitzsch <git@xxxxxxxxxxx>
---
 arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
index 50ae3cfc95bb..cff9415baa46 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -125,6 +125,10 @@ reg_lcd_neg: outn {
 	sensor@48 {
 		compatible = "ti,tmp108";
 		reg = <0x48>;
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&temp_alert_default>;
+		pinctrl-names = "default";
+		#thermal-sensor-cells = <0>;
 	};
 };
 
@@ -361,6 +365,14 @@ reg_lcd_default: reg-lcd-default-state {
 		bias-disable;
 		output-high;
 	};
+
+	temp_alert_default: temp-alert-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
 };
 
 &usb {

-- 
2.45.2