[PATCH v5 2/6] dt-bindings: iio: adc: ad7192: Update clock config

[Alisa-Dariana Roman]

There are actually 4 configuration modes of clock source for AD719X
devices. Either a crystal can be attached externally between MCLK1 and
MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
pin. The other 2 modes make use of the 4.92MHz internal clock.

To configure external clock as either a crystal or a CMOS-compatible
clock, changing the register settings is necessary. Therefore, add clock
name xtal alongside mclk. By selecting one or the other, the register is
configured.

The presence of an external clock source is optional, not required. When
absent, internal clock is used. Modify required property accordingly.

Signed-off-by: Alisa-Dariana Roman <alisa.roman@xxxxxxxxxx>
---
 .../devicetree/bindings/iio/adc/adi,ad7192.yaml      | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index a03da9489ed9..67384bed4cd3 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -39,11 +39,15 @@ properties:
 
   clocks:
     maxItems: 1
-    description: phandle to the master clock (mclk)
+    description:
+      Optionally, either a crystal can be attached externally between MCLK1 and
+      MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
+      pin. If absent, internal 4.92MHz clock is used.
 
   clock-names:
-    items:
-      - const: mclk
+    enum:
+      - xtal
+      - mclk
 
   interrupts:
     maxItems: 1
@@ -135,8 +139,6 @@ patternProperties:
 required:
   - compatible
   - reg
-  - clocks
-  - clock-names
   - interrupts
   - dvdd-supply
   - avdd-supply
-- 
2.34.1