[PATCH 1/3] arm64: dts: ti: k3-pinctrl: Define a generic GPIO MUX Mode

[Nishanth Menon]

Introduce a GPIO mux mode macro for easier readability. All K3 devices
use mux mode 7 to switch to GPIO mux.

Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
 arch/arm64/boot/dts/ti/k3-pinctrl.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index 4cd2df467d0b..b1a0415e6611 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -38,6 +38,8 @@
 #define PIN_DEBOUNCE_CONF5	(5 << DEBOUNCE_SHIFT)
 #define PIN_DEBOUNCE_CONF6	(6 << DEBOUNCE_SHIFT)
 
+#define PIN_GPIO_MUX_MODE	(7)
+
 #define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
-- 
2.43.0