[PATCH 0/6] mips: Support for RTL9302C

[Chris Packham]

This series adds basic support for the RTL9302C reference board. Currently the
focus is on the CPU block stuff. I hope to get around to the DSA switch driver
eventually but this is a small start that lets me boot a mainline kernel on the
board I have. I initialiy started with code from openwrt but have paired it
down to just the clocksource driver and devicetree.

Chris Packham (6):
  dt-bindings: mips: realtek: Add rtl930x-soc compatible
  dt-bindings: timer: Add schema for realtek,otto-timer
  dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc
  clocksource: realtek: Add timer driver for rtl-otto platforms
  mips: generic: add fdt fixup for Realtek reference board
  mips: dts: realtek: Add RTL9302C board

 .../realtek,rtl-intc.yaml                     |   1 +
 .../devicetree/bindings/mips/realtek-rtl.yaml |   2 +
 .../bindings/timer/realtek,otto-timer.yaml    |  54 ++++
 arch/mips/boot/dts/realtek/Makefile           |   1 +
 arch/mips/boot/dts/realtek/RTL9302C.dts       |  74 +++++
 arch/mips/boot/dts/realtek/rtl930x.dtsi       |  78 +++++
 arch/mips/generic/Makefile                    |   1 +
 arch/mips/generic/board-realtek.c             |  81 +++++
 drivers/clocksource/Kconfig                   |  11 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-rtl-otto.c          | 287 ++++++++++++++++++
 include/linux/cpuhotplug.h                    |   1 +
 12 files changed, 592 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml
 create mode 100644 arch/mips/boot/dts/realtek/RTL9302C.dts
 create mode 100644 arch/mips/boot/dts/realtek/rtl930x.dtsi
 create mode 100644 arch/mips/generic/board-realtek.c
 create mode 100644 drivers/clocksource/timer-rtl-otto.c

-- 
2.45.2