Re: [PATCH v6 1/2] clk: qcom: gcc-ipq6018: update sdcc max clock frequency

[Robert Marko]

On 20. 06. 2024. 17:01, Chukun Pan wrote:
> The mmc controller of the IPQ6018 does not support HS400 mode.
> So adjust the maximum clock frequency of sdcc to 200 MHz (HS200).
>
> Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx>
> ---
>   drivers/clk/qcom/gcc-ipq6018.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/qcom/gcc-ipq6018.c b/drivers/clk/qcom/gcc-ipq6018.c
> index 7e69de34c310..6c764e3e2665 100644
> --- a/drivers/clk/qcom/gcc-ipq6018.c
> +++ b/drivers/clk/qcom/gcc-ipq6018.c
> @@ -1617,7 +1617,7 @@ static const struct freq_tbl ftbl_sdcc_apps_clk_src[] = {
>   	F(96000000, P_GPLL2, 12, 0, 0),
>   	F(177777778, P_GPLL0, 4.5, 0, 0),
>   	F(192000000, P_GPLL2, 6, 0, 0),
> -	F(384000000, P_GPLL2, 3, 0, 0),
> +	F(200000000, P_GPLL0, 4, 0, 0),

Hi,
Are you sure that 200MHz is even valid of a frequency, cause all IPQ SoC-s
use 192MHz for the HS200 mode instead.

I would just drop the 384MHz frequency as datasheet clearly states that 
HS400
is not supported.

Regards,
Robert

>   	{ }
>   };
>