[PATCH v3 1/9] soc: qcom: cpr3: Fix 'acc_desc' usage
From: Varadarajan Narayanan
Date: Wed Jun 26 2024 - 06:41:27 EST
cpr3 code assumes that 'acc_desc' is available for SoCs
implementing CPR version 4 or less. However, IPQ9574 SoC
implements CPRv4 without ACC. This causes NULL pointer accesses
resulting in crashes. Hence, check is 'acc_desc' is populated
before using it.
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
drivers/pmdomain/qcom/cpr3.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c
index c7790a71e74f..c28028be50d8 100644
--- a/drivers/pmdomain/qcom/cpr3.c
+++ b/drivers/pmdomain/qcom/cpr3.c
@@ -2399,12 +2399,12 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain,
if (ret)
goto exit;
- if (acc_desc->config)
+ if (acc_desc && acc_desc->config)
regmap_multi_reg_write(drv->tcsr, acc_desc->config,
acc_desc->num_regs_per_fuse);
/* Enable ACC if required */
- if (acc_desc->enable_mask)
+ if (acc_desc && acc_desc->enable_mask)
regmap_update_bits(drv->tcsr, acc_desc->enable_reg,
acc_desc->enable_mask,
acc_desc->enable_mask);
@@ -2676,7 +2676,7 @@ static int cpr_probe(struct platform_device *pdev)
desc = data->cpr_desc;
/* CPRh disallows MEM-ACC access from the HLOS */
- if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPRH)
+ if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPR4)
return -EINVAL;
drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
@@ -2703,7 +2703,7 @@ static int cpr_probe(struct platform_device *pdev)
mutex_init(&drv->lock);
- if (desc->cpr_type < CTRL_TYPE_CPRH) {
+ if (desc->cpr_type < CTRL_TYPE_CPR4) {
np = of_parse_phandle(dev->of_node, "qcom,acc", 0);
if (!np)
return -ENODEV;
--
2.34.1