Re: [PATCH v4 1/3] dt-bindings: mmc: renesas,sdhi: Document RZ/V2H(P) support
From: Conor Dooley
Date: Wed Jun 26 2024 - 12:36:44 EST
On Wed, Jun 26, 2024 at 02:23:39PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that
> of the R-Car Gen3, but it has some differences:
> - HS400 is not supported.
> - It supports the SD_IOVS bit to control the IO voltage level.
> - It supports fixed address mode.
>
> To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057'
> compatible string is added.
>
> A 'vqmmc-regulator' object is introduced to handle the power enable (PWEN)
> and voltage level switching for the SD/MMC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> v3->v4
> - Dropped 'renesas,sdhi-use-internal-regulator' property
> - Moved 'vqmmc-regulator' to the top level
>
> v2->v3
> - Renamed vqmmc-r9a09g057-regulator object to vqmmc-regulator
> - Added regulator-compatible property for vqmmc-regulator
> - Added 'renesas,sdhi-use-internal-regulator' property
>
> v1->v2
> - Moved vqmmc object in the if block
> - Updated commit message
> ---
> .../devicetree/bindings/mmc/renesas,sdhi.yaml | 26 ++++++++++++++++++-
> 1 file changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> index 3d0e61e59856..d632b67080bd 100644
> --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> @@ -18,6 +18,7 @@ properties:
> - renesas,sdhi-r7s9210 # SH-Mobile AG5
> - renesas,sdhi-r8a73a4 # R-Mobile APE6
> - renesas,sdhi-r8a7740 # R-Mobile A1
> + - renesas,sdhi-r9a09g057 # RZ/V2H(P)
> - renesas,sdhi-sh73a0 # R-Mobile APE6
> - items:
> - enum:
> @@ -111,6 +112,15 @@ properties:
>
> max-frequency: true
>
> + vqmmc-regulator:
> + type: object
> + description: VQMMC SD regulator
> + $ref: /schemas/regulator/regulator.yaml#
> + unevaluatedProperties: false
> + properties:
> + regulator-compatible:
> + pattern: "^vqmmc-r9a09g057-regulator"
The regulator core seems to say this property is deprecated:
/**
* of_regulator_match - extract multiple regulator init data from device tree.
* @dev: device requesting the data
* @node: parent device node of the regulators
* @matches: match table for the regulators
* @num_matches: number of entries in match table
*
* This function uses a match table specified by the regulator driver to
* parse regulator init data from the device tree. @node is expected to
* contain a set of child nodes, each providing the init data for one
* regulator. The data parsed from a child node will be matched to a regulator
* based on either the deprecated property regulator-compatible if present,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
What am I missing? I also don't really understand why you're allowing a
pattern either, could you explain that?
Cheers,
Conor.
* or otherwise the child node's name. Note that the match table is modified
* in place and an additional of_node reference is taken for each matched
* regulator.
*
* Returns the number of matches found or a negative error code on failure.
*/
> +
> allOf:
> - $ref: mmc-controller.yaml
>
> @@ -118,7 +128,9 @@ allOf:
> properties:
> compatible:
> contains:
> - const: renesas,rzg2l-sdhi
> + enum:
> + - renesas,sdhi-r9a09g057
> + - renesas,rzg2l-sdhi
> then:
> properties:
> clocks:
> @@ -204,6 +216,18 @@ allOf:
> sectioned off to be run by a separate second clock source to allow
> the main core clock to be turned off to save power.
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: renesas,sdhi-r9a09g057
> + then:
> + required:
> + - vqmmc-regulator
> + else:
> + properties:
> + vqmmc-regulator: false
> +
> required:
> - compatible
> - reg
> --
> 2.34.1
>
Attachment:
signature.asc
Description: PGP signature