Re: [PATCH v3 8/9] soc: qcom: cpr3: Add IPQ9574 definitions

[Dmitry Baryshkov]

On Wed, Jun 26, 2024 at 04:10:01PM GMT, Varadarajan Narayanan wrote:
> From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> 
> Add thread, scaling factor, CPR descriptor defines to enable CPR
> on IPQ9574.
> 
> Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> ---
> v3: Fix patch author
>     Included below information in cover letter
> v2: Fix Signed-off-by order
> Depends:
> 	[1] https://lore.kernel.org/lkml/20230217-topic-cpr3h-v14-0-9fd23241493d@xxxxxxxxxx/T/
> 	[2] https://github.com/quic-varada/cpr/commits/konrad/
> ---
>  drivers/pmdomain/qcom/cpr3.c | 137 +++++++++++++++++++++++++++++++++++
>  1 file changed, 137 insertions(+)
> 
> diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c
> index c28028be50d8..66c8a4bd9adc 100644
> --- a/drivers/pmdomain/qcom/cpr3.c
> +++ b/drivers/pmdomain/qcom/cpr3.c

> +
> +static const struct cpr_desc ipq9574_cpr_desc = {
> +	.cpr_type = CTRL_TYPE_CPR4,

So, is it CPR4 or CPRh?

> +	.num_threads = 1,
> +	.apm_threshold = 850000,
> +	.apm_crossover = 880000,
> +	.apm_hysteresis = 0,
> +	.cpr_base_voltage = 700000,
> +	.cpr_max_voltage = 1100000,
> +	.timer_delay_us = 5000,
> +	.timer_cons_up = 0,
> +	.timer_cons_down = 0,
> +	.up_threshold = 2,
> +	.down_threshold = 2,
> +	.idle_clocks = 15,
> +	.count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN,
> +	.count_repeat = 1,
> +	.gcnt_us = 1,
> +	.vreg_step_fixed = 12500,
> +	.vreg_step_up_limit = 1,
> +	.vreg_step_down_limit = 1,
> +	.vdd_settle_time_us = 34,
> +	.corner_settle_time_us = 6,
> +	.reduce_to_corner_uV = true,
> +	.hw_closed_loop_en = false,
> +	.threads = (const struct cpr_thread_desc *[]) {
> +		&ipq9574_thread_silver,

If it's silver, where is gold or bronze?

> +	},
> +};
> +
> +static const struct cpr_acc_desc ipq9574_cpr_acc_desc = {
> +	.cpr_desc = &ipq9574_cpr_desc,
> +};
> +
>  static const int sdm630_gold_scaling_factor[][CPR3_RO_COUNT] = {
>  	/* Same RO factors for all fuse corners */
>  	{
> @@ -2828,6 +2964,7 @@ static void cpr_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id cpr3_match_table[] = {
> +	{ .compatible = "qcom,ipq9574-cprh", .data = &ipq9574_cpr_acc_desc },
>  	{ .compatible = "qcom,msm8998-cprh", .data = &msm8998_cpr_acc_desc },
>  	{ .compatible = "qcom,sdm630-cprh", .data = &sdm630_cpr_acc_desc },
>  	{ }
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry