[PATCH v3 2/3] arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi

From: Bartosz Golaszewski
Date: Thu Jun 27 2024 - 07:43:25 EST

From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

In order to support multiple revisions of the sa8775p-ride board, create
a .dtsi containing the common parts and split out the ethernet bits into
the actual board file as they will change in revision 3.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 836 +--------------------
arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 814 ++++++++++++++++++++
2 files changed, 836 insertions(+), 814 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 26ad05bd3b3f..2e87fd760dbd 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -5,835 +5,43 @@

/dts-v1/;

-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-#include "sa8775p.dtsi"
-#include "sa8775p-pmics.dtsi"
+#include "sa8775p-ride.dtsi"

/ {
model = "Qualcomm SA8775P Ride";
compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
-
- aliases {
- ethernet0 = &ethernet0;
- ethernet1 = &ethernet1;
- i2c11 = &i2c11;
- i2c18 = &i2c18;
- serial0 = &uart10;
- serial1 = &uart12;
- serial2 = &uart17;
- spi16 = &spi16;
- ufshc1 = &ufs_mem_hc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&apps_rsc {
- regulators-0 {
- compatible = "qcom,pmm8654au-rpmh-regulators";
- qcom,pmic-id = "a";
-
- vreg_s4a: smps4 {
- regulator-name = "vreg_s4a";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1816000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_s5a: smps5 {
- regulator-name = "vreg_s5a";
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1996000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_s9a: smps9 {
- regulator-name = "vreg_s9a";
- regulator-min-microvolt = <535000>;
- regulator-max-microvolt = <1120000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l4a: ldo4 {
- regulator-name = "vreg_l4a";
- regulator-min-microvolt = <788000>;
- regulator-max-microvolt = <1050000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l5a: ldo5 {
- regulator-name = "vreg_l5a";
- regulator-min-microvolt = <870000>;
- regulator-max-microvolt = <950000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l6a: ldo6 {
- regulator-name = "vreg_l6a";
- regulator-min-microvolt = <870000>;
- regulator-max-microvolt = <970000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l7a: ldo7 {
- regulator-name = "vreg_l7a";
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <950000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l8a: ldo8 {
- regulator-name = "vreg_l8a";
- regulator-min-microvolt = <2504000>;
- regulator-max-microvolt = <3300000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l9a: ldo9 {
- regulator-name = "vreg_l9a";
- regulator-min-microvolt = <2970000>;
- regulator-max-microvolt = <3544000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-1 {
- compatible = "qcom,pmm8654au-rpmh-regulators";
- qcom,pmic-id = "c";
-
- vreg_l1c: ldo1 {
- regulator-name = "vreg_l1c";
- regulator-min-microvolt = <1140000>;
- regulator-max-microvolt = <1260000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2c: ldo2 {
- regulator-name = "vreg_l2c";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1100000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3c: ldo3 {
- regulator-name = "vreg_l3c";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l4c: ldo4 {
- regulator-name = "vreg_l4c";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- /*
- * FIXME: This should have regulator-allow-set-load but
- * we're getting an over-current fault from the PMIC
- * when switching to LPM.
- */
- };
-
- vreg_l5c: ldo5 {
- regulator-name = "vreg_l5c";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l6c: ldo6 {
- regulator-name = "vreg_l6c";
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <1980000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l7c: ldo7 {
- regulator-name = "vreg_l7c";
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <2000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l8c: ldo8 {
- regulator-name = "vreg_l8c";
- regulator-min-microvolt = <2400000>;
- regulator-max-microvolt = <3300000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l9c: ldo9 {
- regulator-name = "vreg_l9c";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <2700000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-2 {
- compatible = "qcom,pmm8654au-rpmh-regulators";
- qcom,pmic-id = "e";
-
- vreg_s4e: smps4 {
- regulator-name = "vreg_s4e";
- regulator-min-microvolt = <970000>;
- regulator-max-microvolt = <1520000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_s7e: smps7 {
- regulator-name = "vreg_s7e";
- regulator-min-microvolt = <1010000>;
- regulator-max-microvolt = <1170000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_s9e: smps9 {
- regulator-name = "vreg_s9e";
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <570000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l6e: ldo6 {
- regulator-name = "vreg_l6e";
- regulator-min-microvolt = <1280000>;
- regulator-max-microvolt = <1450000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l8e: ldo8 {
- regulator-name = "vreg_l8e";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1950000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- };
- };
};

&ethernet0 {
phy-mode = "sgmii";
- phy-handle = <&sgmii_phy0>;
-
- pinctrl-0 = <&ethernet0_default>;
- pinctrl-names = "default";
-
- snps,mtl-rx-config = <&mtl_rx_setup>;
- snps,mtl-tx-config = <&mtl_tx_setup>;
- snps,ps-speed = <1000>;
-
- status = "okay";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sgmii_phy0: phy@8 {
- compatible = "ethernet-phy-id0141.0dd4";
- reg = <0x8>;
- device_type = "ethernet-phy";
- interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
- reset-assert-us = <11000>;
- reset-deassert-us = <70000>;
- };
-
- sgmii_phy1: phy@a {
- compatible = "ethernet-phy-id0141.0dd4";
- reg = <0xa>;
- device_type = "ethernet-phy";
- interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
- reset-assert-us = <11000>;
- reset-deassert-us = <70000>;
- };
- };
-
- mtl_rx_setup: rx-queues-config {
- snps,rx-queues-to-use = <4>;
- snps,rx-sched-sp;
-
- queue0 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x0>;
- snps,route-up;
- snps,priority = <0x1>;
- };
-
- queue1 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x1>;
- snps,route-ptp;
- };
-
- queue2 {
- snps,avb-algorithm;
- snps,map-to-dma-channel = <0x2>;
- snps,route-avcp;
- };
-
- queue3 {
- snps,avb-algorithm;
- snps,map-to-dma-channel = <0x3>;
- snps,priority = <0xc>;
- };
- };
-
- mtl_tx_setup: tx-queues-config {
- snps,tx-queues-to-use = <4>;
- snps,tx-sched-sp;
-
- queue0 {
- snps,dcb-algorithm;
- };
-
- queue1 {
- snps,dcb-algorithm;
- };
-
- queue2 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3e800>;
- snps,low_credit = <0xffc18000>;
- };
-
- queue3 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3e800>;
- snps,low_credit = <0xffc18000>;
- };
- };
};

&ethernet1 {
phy-mode = "sgmii";
- phy-handle = <&sgmii_phy1>;
+};

- snps,mtl-rx-config = <&mtl_rx_setup1>;
- snps,mtl-tx-config = <&mtl_tx_setup1>;
- snps,ps-speed = <1000>;
+&mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;

- status = "okay";
-
- mtl_rx_setup1: rx-queues-config {
- snps,rx-queues-to-use = <4>;
- snps,rx-sched-sp;
-
- queue0 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x0>;
- snps,route-up;
- snps,priority = <0x1>;
- };
-
- queue1 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x1>;
- snps,route-ptp;
- };
-
- queue2 {
- snps,avb-algorithm;
- snps,map-to-dma-channel = <0x2>;
- snps,route-avcp;
- };
-
- queue3 {
- snps,avb-algorithm;
- snps,map-to-dma-channel = <0x3>;
- snps,priority = <0xc>;
- };
+ sgmii_phy0: phy@8 {
+ compatible = "ethernet-phy-id0141.0dd4";
+ reg = <0x8>;
+ device_type = "ethernet-phy";
+ interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <11000>;
+ reset-deassert-us = <70000>;
};

- mtl_tx_setup1: tx-queues-config {
- snps,tx-queues-to-use = <4>;
- snps,tx-sched-sp;
-
- queue0 {
- snps,dcb-algorithm;
- };
-
- queue1 {
- snps,dcb-algorithm;
- };
-
- queue2 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3e800>;
- snps,low_credit = <0xffc18000>;
- };
-
- queue3 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3e800>;
- snps,low_credit = <0xffc18000>;
- };
+ sgmii_phy1: phy@a {
+ compatible = "ethernet-phy-id0141.0dd4";
+ reg = <0xa>;
+ device_type = "ethernet-phy";
+ interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <11000>;
+ reset-deassert-us = <70000>;
};
};
-
-&i2c11 {
- clock-frequency = <400000>;
- pinctrl-0 = <&qup_i2c11_default>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&i2c18 {
- clock-frequency = <400000>;
- pinctrl-0 = <&qup_i2c18_default>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&pmm8654au_0_gpios {
- gpio-line-names = "DS_EN",
- "POFF_COMPLETE",
- "UFS0_VER_ID",
- "FAST_POFF",
- "DBU1_PON_DONE",
- "AOSS_SLEEP",
- "CAM_DES0_EN",
- "CAM_DES1_EN",
- "CAM_DES2_EN",
- "CAM_DES3_EN",
- "UEFI",
- "ANALOG_PON_OPT";
-};
-
-&pmm8654au_0_pon_resin {
- linux,code = <KEY_VOLUMEDOWN>;
- status = "okay";
-};
-
-&pmm8654au_1_gpios {
- gpio-line-names = "PMIC_C_ID0",
- "PMIC_C_ID1",
- "UFS1_VER_ID",
- "IPA_PWR",
- "",
- "WLAN_DBU4_EN",
- "WLAN_EN",
- "BT_EN",
- "USB2_PWR_EN",
- "USB2_FAULT";
-
- usb2_en_state: usb2-en-state {
- pins = "gpio9";
- function = "normal";
- output-high;
- power-source = <0>;
- };
-};
-
-&pmm8654au_2_gpios {
- gpio-line-names = "PMIC_E_ID0",
- "PMIC_E_ID1",
- "USB0_PWR_EN",
- "USB0_FAULT",
- "SENSOR_IRQ_1",
- "SENSOR_IRQ_2",
- "SENSOR_RST",
- "SGMIIO0_RST",
- "SGMIIO1_RST",
- "USB1_PWR_ENABLE",
- "USB1_FAULT",
- "VMON_SPX8";
-
- usb0_en_state: usb0-en-state {
- pins = "gpio3";
- function = "normal";
- output-high;
- power-source = <0>;
- };
-
- usb1_en_state: usb1-en-state {
- pins = "gpio10";
- function = "normal";
- output-high;
- power-source = <0>;
- };
-};
-
-&pmm8654au_3_gpios {
- gpio-line-names = "PMIC_G_ID0",
- "PMIC_G_ID1",
- "GNSS_RST",
- "GNSS_EN",
- "GNSS_BOOT_MODE";
-};
-
-&qupv3_id_1 {
- status = "okay";
-};
-
-&qupv3_id_2 {
- status = "okay";
-};
-
-&serdes0 {
- phy-supply = <&vreg_l5a>;
- status = "okay";
-};
-
-&serdes1 {
- phy-supply = <&vreg_l5a>;
- status = "okay";
-};
-
-&sleep_clk {
- clock-frequency = <32764>;
-};
-
-&spi16 {
- pinctrl-0 = <&qup_spi16_default>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&tlmm {
- ethernet0_default: ethernet0-default-state {
- ethernet0_mdc: ethernet0-mdc-pins {
- pins = "gpio8";
- function = "emac0_mdc";
- drive-strength = <16>;
- bias-pull-up;
- };
-
- ethernet0_mdio: ethernet0-mdio-pins {
- pins = "gpio9";
- function = "emac0_mdio";
- drive-strength = <16>;
- bias-pull-up;
- };
- };
-
- qup_uart10_default: qup-uart10-state {
- pins = "gpio46", "gpio47";
- function = "qup1_se3";
- };
-
- qup_spi16_default: qup-spi16-state {
- pins = "gpio86", "gpio87", "gpio88", "gpio89";
- function = "qup2_se2";
- drive-strength = <6>;
- bias-disable;
- };
-
- qup_i2c11_default: qup-i2c11-state {
- pins = "gpio48", "gpio49";
- function = "qup1_se4";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c18_default: qup-i2c18-state {
- pins = "gpio95", "gpio96";
- function = "qup2_se4";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_uart12_default: qup-uart12-state {
- qup_uart12_cts: qup-uart12-cts-pins {
- pins = "gpio52";
- function = "qup1_se5";
- bias-disable;
- };
-
- qup_uart12_rts: qup-uart12-rts-pins {
- pins = "gpio53";
- function = "qup1_se5";
- bias-pull-down;
- };
-
- qup_uart12_tx: qup-uart12-tx-pins {
- pins = "gpio54";
- function = "qup1_se5";
- bias-pull-up;
- };
-
- qup_uart12_rx: qup-uart12-rx-pins {
- pins = "gpio55";
- function = "qup1_se5";
- bias-pull-down;
- };
- };
-
- qup_uart17_default: qup-uart17-state {
- qup_uart17_cts: qup-uart17-cts-pins {
- pins = "gpio91";
- function = "qup2_se3";
- bias-disable;
- };
-
- qup_uart17_rts: qup0-uart17-rts-pins {
- pins = "gpio92";
- function = "qup2_se3";
- bias-pull-down;
- };
-
- qup_uart17_tx: qup0-uart17-tx-pins {
- pins = "gpio93";
- function = "qup2_se3";
- bias-pull-up;
- };
-
- qup_uart17_rx: qup0-uart17-rx-pins {
- pins = "gpio94";
- function = "qup2_se3";
- bias-pull-down;
- };
- };
-
- pcie0_default_state: pcie0-default-state {
- perst-pins {
- pins = "gpio2";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- clkreq-pins {
- pins = "gpio1";
- function = "pcie0_clkreq";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- wake-pins {
- pins = "gpio0";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie1_default_state: pcie1-default-state {
- perst-pins {
- pins = "gpio4";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- clkreq-pins {
- pins = "gpio3";
- function = "pcie1_clkreq";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- wake-pins {
- pins = "gpio5";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-};
-
-&pcie0 {
- perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pcie0_default_state>;
-
- status = "okay";
-};
-
-&pcie1 {
- perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pcie1_default_state>;
-
- status = "okay";
-};
-
-&pcie0_phy {
- vdda-phy-supply = <&vreg_l5a>;
- vdda-pll-supply = <&vreg_l1c>;
-
- status = "okay";
-};
-
-&pcie1_phy {
- vdda-phy-supply = <&vreg_l5a>;
- vdda-pll-supply = <&vreg_l1c>;
-
- status = "okay";
-};
-
-&uart10 {
- compatible = "qcom,geni-debug-uart";
- pinctrl-0 = <&qup_uart10_default>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&uart12 {
- pinctrl-0 = <&qup_uart12_default>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&uart17 {
- pinctrl-0 = <&qup_uart17_default>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&ufs_mem_hc {
- reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
- vcc-supply = <&vreg_l8a>;
- vcc-max-microamp = <1100000>;
- vccq-supply = <&vreg_l4c>;
- vccq-max-microamp = <1200000>;
-
- status = "okay";
-};
-
-&ufs_mem_phy {
- vdda-phy-supply = <&vreg_l4a>;
- vdda-pll-supply = <&vreg_l1c>;
-
- status = "okay";
-};
-
-&usb_0 {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_en_state>;
-
- status = "okay";
-};
-
-&usb_0_dwc3 {
- dr_mode = "peripheral";
-};
-
-&usb_0_hsphy {
- vdda-pll-supply = <&vreg_l7a>;
- vdda18-supply = <&vreg_l6c>;
- vdda33-supply = <&vreg_l9a>;
-
- status = "okay";
-};
-
-&usb_0_qmpphy {
- vdda-phy-supply = <&vreg_l1c>;
- vdda-pll-supply = <&vreg_l7a>;
-
- status = "okay";
-};
-
-&usb_1 {
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_en_state>;
-
- status = "okay";
-};
-
-&usb_1_dwc3 {
- dr_mode = "host";
-};
-
-&usb_1_hsphy {
- vdda-pll-supply = <&vreg_l7a>;
- vdda18-supply = <&vreg_l6c>;
- vdda33-supply = <&vreg_l9a>;
-
- status = "okay";
-};
-
-&usb_1_qmpphy {
- vdda-phy-supply = <&vreg_l1c>;
- vdda-pll-supply = <&vreg_l7a>;
-
- status = "okay";
-};
-
-&usb_2 {
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_en_state>;
-
- status = "okay";
-};
-
-&usb_2_dwc3 {
- dr_mode = "host";
-};
-
-&usb_2_hsphy {
- vdda-pll-supply = <&vreg_l7a>;
- vdda18-supply = <&vreg_l6c>;
- vdda33-supply = <&vreg_l9a>;
-
- status = "okay";
-};
-
-&xo_board_clk {
- clock-frequency = <38400000>;
-};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
new file mode 100644
index 000000000000..2a6170623ea9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@@ -0,0 +1,814 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sa8775p.dtsi"
+#include "sa8775p-pmics.dtsi"
+
+/ {
+ aliases {
+ ethernet0 = &ethernet0;
+ ethernet1 = &ethernet1;
+ i2c11 = &i2c11;
+ i2c18 = &i2c18;
+ serial0 = &uart10;
+ serial1 = &uart12;
+ serial2 = &uart17;
+ spi16 = &spi16;
+ ufshc1 = &ufs_mem_hc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_s4a: smps4 {
+ regulator-name = "vreg_s4a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1816000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a: smps5 {
+ regulator-name = "vreg_s5a";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1996000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9a: smps9 {
+ regulator-name = "vreg_s9a";
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4a: ldo4 {
+ regulator-name = "vreg_l4a";
+ regulator-min-microvolt = <788000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a: ldo6 {
+ regulator-name = "vreg_l6a";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a: ldo8 {
+ regulator-name = "vreg_l8a";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a: ldo9 {
+ regulator-name = "vreg_l9a";
+ regulator-min-microvolt = <2970000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c: ldo3 {
+ regulator-name = "vreg_l3c";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c: ldo4 {
+ regulator-name = "vreg_l4c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ /*
+ * FIXME: This should have regulator-allow-set-load but
+ * we're getting an over-current fault from the PMIC
+ * when switching to LPM.
+ */
+ };
+
+ vreg_l5c: ldo5 {
+ regulator-name = "vreg_l5c";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c: ldo6 {
+ regulator-name = "vreg_l6c";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c: ldo9 {
+ regulator-name = "vreg_l9c";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vreg_s4e: smps4 {
+ regulator-name = "vreg_s4e";
+ regulator-min-microvolt = <970000>;
+ regulator-max-microvolt = <1520000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s7e: smps7 {
+ regulator-name = "vreg_s7e";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9e: smps9 {
+ regulator-name = "vreg_s9e";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <570000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6e: ldo6 {
+ regulator-name = "vreg_l6e";
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8e: ldo8 {
+ regulator-name = "vreg_l8e";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&ethernet0 {
+ phy-handle = <&sgmii_phy0>;
+
+ pinctrl-0 = <&ethernet0_default>;
+ pinctrl-names = "default";
+
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ snps,ps-speed = <1000>;
+
+ status = "okay";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,route-ptp;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,route-avcp;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0xc>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+ snps,tx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+ };
+};
+
+&ethernet1 {
+ phy-handle = <&sgmii_phy1>;
+
+ snps,mtl-rx-config = <&mtl_rx_setup1>;
+ snps,mtl-tx-config = <&mtl_tx_setup1>;
+ snps,ps-speed = <1000>;
+
+ status = "okay";
+
+ mtl_rx_setup1: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,route-ptp;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,route-avcp;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0xc>;
+ };
+ };
+
+ mtl_tx_setup1: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+ snps,tx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+ };
+};
+
+&i2c11 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&qup_i2c11_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&i2c18 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&qup_i2c18_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pmm8654au_0_gpios {
+ gpio-line-names = "DS_EN",
+ "POFF_COMPLETE",
+ "UFS0_VER_ID",
+ "FAST_POFF",
+ "DBU1_PON_DONE",
+ "AOSS_SLEEP",
+ "CAM_DES0_EN",
+ "CAM_DES1_EN",
+ "CAM_DES2_EN",
+ "CAM_DES3_EN",
+ "UEFI",
+ "ANALOG_PON_OPT";
+};
+
+&pmm8654au_0_pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pmm8654au_1_gpios {
+ gpio-line-names = "PMIC_C_ID0",
+ "PMIC_C_ID1",
+ "UFS1_VER_ID",
+ "IPA_PWR",
+ "",
+ "WLAN_DBU4_EN",
+ "WLAN_EN",
+ "BT_EN",
+ "USB2_PWR_EN",
+ "USB2_FAULT";
+
+ usb2_en_state: usb2-en-state {
+ pins = "gpio9";
+ function = "normal";
+ output-high;
+ power-source = <0>;
+ };
+};
+
+&pmm8654au_2_gpios {
+ gpio-line-names = "PMIC_E_ID0",
+ "PMIC_E_ID1",
+ "USB0_PWR_EN",
+ "USB0_FAULT",
+ "SENSOR_IRQ_1",
+ "SENSOR_IRQ_2",
+ "SENSOR_RST",
+ "SGMIIO0_RST",
+ "SGMIIO1_RST",
+ "USB1_PWR_ENABLE",
+ "USB1_FAULT",
+ "VMON_SPX8";
+
+ usb0_en_state: usb0-en-state {
+ pins = "gpio3";
+ function = "normal";
+ output-high;
+ power-source = <0>;
+ };
+
+ usb1_en_state: usb1-en-state {
+ pins = "gpio10";
+ function = "normal";
+ output-high;
+ power-source = <0>;
+ };
+};
+
+&pmm8654au_3_gpios {
+ gpio-line-names = "PMIC_G_ID0",
+ "PMIC_G_ID1",
+ "GNSS_RST",
+ "GNSS_EN",
+ "GNSS_BOOT_MODE";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&serdes0 {
+ phy-supply = <&vreg_l5a>;
+ status = "okay";
+};
+
+&serdes1 {
+ phy-supply = <&vreg_l5a>;
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32764>;
+};
+
+&spi16 {
+ pinctrl-0 = <&qup_spi16_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tlmm {
+ ethernet0_default: ethernet0-default-state {
+ ethernet0_mdc: ethernet0-mdc-pins {
+ pins = "gpio8";
+ function = "emac0_mdc";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ ethernet0_mdio: ethernet0-mdio-pins {
+ pins = "gpio9";
+ function = "emac0_mdio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+ qup_uart10_default: qup-uart10-state {
+ pins = "gpio46", "gpio47";
+ function = "qup1_se3";
+ };
+
+ qup_spi16_default: qup-spi16-state {
+ pins = "gpio86", "gpio87", "gpio88", "gpio89";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_i2c11_default: qup-i2c11-state {
+ pins = "gpio48", "gpio49";
+ function = "qup1_se4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c18_default: qup-i2c18-state {
+ pins = "gpio95", "gpio96";
+ function = "qup2_se4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_uart12_default: qup-uart12-state {
+ qup_uart12_cts: qup-uart12-cts-pins {
+ pins = "gpio52";
+ function = "qup1_se5";
+ bias-disable;
+ };
+
+ qup_uart12_rts: qup-uart12-rts-pins {
+ pins = "gpio53";
+ function = "qup1_se5";
+ bias-pull-down;
+ };
+
+ qup_uart12_tx: qup-uart12-tx-pins {
+ pins = "gpio54";
+ function = "qup1_se5";
+ bias-pull-up;
+ };
+
+ qup_uart12_rx: qup-uart12-rx-pins {
+ pins = "gpio55";
+ function = "qup1_se5";
+ bias-pull-down;
+ };
+ };
+
+ qup_uart17_default: qup-uart17-state {
+ qup_uart17_cts: qup-uart17-cts-pins {
+ pins = "gpio91";
+ function = "qup2_se3";
+ bias-disable;
+ };
+
+ qup_uart17_rts: qup0-uart17-rts-pins {
+ pins = "gpio92";
+ function = "qup2_se3";
+ bias-pull-down;
+ };
+
+ qup_uart17_tx: qup0-uart17-tx-pins {
+ pins = "gpio93";
+ function = "qup2_se3";
+ bias-pull-up;
+ };
+
+ qup_uart17_rx: qup0-uart17-rx-pins {
+ pins = "gpio94";
+ function = "qup2_se3";
+ bias-pull-down;
+ };
+ };
+
+ pcie0_default_state: pcie0-default-state {
+ perst-pins {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio1";
+ function = "pcie0_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio0";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default-state {
+ perst-pins {
+ pins = "gpio4";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio3";
+ function = "pcie1_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio5";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&pcie0 {
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+
+ status = "okay";
+};
+
+&pcie1 {
+ perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default_state>;
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&uart10 {
+ compatible = "qcom,geni-debug-uart";
+ pinctrl-0 = <&qup_uart10_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart12 {
+ pinctrl-0 = <&qup_uart12_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart17 {
+ pinctrl-0 = <&qup_uart17_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l8a>;
+ vcc-max-microamp = <1100000>;
+ vccq-supply = <&vreg_l4c>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&usb_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_en_state>;
+
+ status = "okay";
+};
+
+&usb_0_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l6c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l7a>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_en_state>;
+
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l6c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l7a>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_en_state>;
+
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l6c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
--
2.43.0