Re: [PATCH 3/6] arm64: dts: qcom: sc7280: Add IMX577 camera sensor

[Dmitry Baryshkov]

On Sat, Jun 29, 2024 at 12:02:37AM GMT, Vikram Sharma wrote:
> Add support for IMX577 camera sensor for SC7280 SoC.

Note, the subject and commit description do not match patch contents.

> 
> Signed-off-by: Hariram Purushothaman <quic_hariramp@xxxxxxxxxxx>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@xxxxxxxxxxx>
> Signed-off-by: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 9ac251fec262..1c99ee09a11a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -5167,6 +5167,39 @@ cci3_sleep: cci3-sleep-state {
>  				bias-pull-down;
>  			};
>  
> +			cam2_default: cam2-default {
> +				rst {
> +					pins = "gpio78"; /*cam3*/
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				mclk {
> +					pins = "gpio67"; /*cam3*/
> +					function = "cam_mclk";
> +					drive-strength = <2>; /*RB5 was 16 and i changed to 2 here*/
> +					bias-disable;
> +				};
> +			};
> +
> +			cam2_suspend: cam2-suspend {
> +				rst {
> +					pins = "gpio78"; /*cam3*/
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +					output-low;
> +				};
> +
> +				mclk {
> +					pins = "gpio67"; /*cam3*/
> +					function = "cam_mclk";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +			};
> +
>  			dp_hot_plug_det: dp-hot-plug-det-state {
>  				pins = "gpio47";
>  				function = "dp_hot";
> 
> -- 
> 2.25.1
> 

-- 
With best wishes
Dmitry