[PATCH v2 01/11] hwmon: (amc6821) Stop accepting invalid pwm values

[Guenter Roeck]

The pwm value range is well defined from 0..255. Don't accept
any values outside this range.

Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
v2: Use kstrtou8() instead of kstrtol() where possible.
    Limit range of pwm1_auto_point_pwm to 0..254 in patch 1
    instead of limiting it later, and do not accept invalid
    values for the attribute.

 drivers/hwmon/amc6821.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index 9b02b304c2f5..eb2d5592a41a 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -355,13 +355,13 @@ static ssize_t pwm1_store(struct device *dev,
 {
 	struct amc6821_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
-	long val;
-	int ret = kstrtol(buf, 10, &val);
+	u8 val;
+	int ret = kstrtou8(buf, 10, &val);
 	if (ret)
 		return ret;
 
 	mutex_lock(&data->update_lock);
-	data->pwm1 = clamp_val(val , 0, 255);
+	data->pwm1 = val;
 	i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1);
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -558,13 +558,16 @@ static ssize_t pwm1_auto_point_pwm_store(struct device *dev,
 	struct amc6821_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
 	int dpwm;
-	long val;
-	int ret = kstrtol(buf, 10, &val);
+	u8 val;
+	int ret = kstrtou8(buf, 10, &val);
 	if (ret)
 		return ret;
 
+	if (val > 254)
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
-	data->pwm1_auto_point_pwm[1] = clamp_val(val, 0, 254);
+	data->pwm1_auto_point_pwm[1] = val;
 	if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP,
 			data->pwm1_auto_point_pwm[1])) {
 		dev_err(&client->dev, "Register write error, aborting.\n");
-- 
2.39.2