Re: [PATCH 0/2] iio: adc: add support for pac1921

[Conor Dooley]

On Wed, Jul 03, 2024 at 03:34:34PM +0200, Matteo Martelli wrote:
> Add iio driver and DT binding for the Microchip PAC1921 Current/Power
> monitor.
> 
> Implemented most of the features with few limitations listed in the
> driver commit message.
> 
> Tested with a Pine64 host board connected to a PAC1921 click board [1]
> via I2C. The PAC1921 click board embeds the Microchip PAC1921 device
> and a 10 mOhms shunt resistor. The PAC1921 datasheet is at [2].
> 
> [1]: https://www.mikroe.com/pac1921-click
> [2]: https://ww1.microchip.com/downloads/en/DeviceDoc/PAC1921-Data-Sheet-DS20005293E.pdf
> 
> Signed-off-by: Matteo Martelli <matteomartelli3@xxxxxxxxx>

Marius, could you take a look at this driver/binding?

> ---
> Matteo Martelli (2):
>       dt-bindings: iio: adc: add binding for pac1921
>       iio: adc: add support for pac1921
> 
>  .../ABI/testing/sysfs-bus-iio-adc-pac1921          |   45 +
>  .../bindings/iio/adc/microchip,pac1921.yaml        |   79 ++
>  MAINTAINERS                                        |    7 +
>  drivers/iio/adc/Kconfig                            |   10 +
>  drivers/iio/adc/Makefile                           |    1 +
>  drivers/iio/adc/pac1921.c                          | 1033 ++++++++++++++++++++
>  6 files changed, 1175 insertions(+)
> ---
> base-commit: 529d2e1900642eba6df28307e26e19793e227546
> change-id: 20240606-iio-pac1921-77fa0fa3ac11
> 
> Best regards,
> -- 
> Matteo Martelli <matteomartelli3@xxxxxxxxx>
>

Attachment: signature.asc
Description: PGP signature