RE: [PATCH v6 2/3] Input: adp5588-keys - add support for pure gpio
From: Agarwal, Utsav
Date: Thu Jul 04 2024 - 08:51:56 EST
Hi Nuno,
> -----Original Message-----
> From: Nuno Sá <noname.nuno@xxxxxxxxx>
> Sent: Thursday, July 4, 2024 12:10 PM
> To: Agarwal, Utsav <Utsav.Agarwal@xxxxxxxxxx>; Hennerich, Michael
> <Michael.Hennerich@xxxxxxxxxx>; Dmitry Torokhov
> <dmitry.torokhov@xxxxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; Krzysztof
> Kozlowski <krzk+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>; Sa,
> Nuno <Nuno.Sa@xxxxxxxxxx>
> Cc: linux-input@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; Artamonovs, Arturs
> <Arturs.Artamonovs@xxxxxxxxxx>; Bimpikas, Vasileios
> <Vasileios.Bimpikas@xxxxxxxxxx>; Gaskell, Oliver
> <Oliver.Gaskell@xxxxxxxxxx>
> Subject: Re: [PATCH v6 2/3] Input: adp5588-keys - add support for pure gpio
>
> [External]
>
> On Thu, 2024-07-04 at 11:45 +0100, Utsav Agarwal via B4 Relay wrote:
> > From: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx>
> >
> > Keypad specific setup is relaxed if no keypad rows/columns are specified,
> > enabling a purely gpio operation.
> >
> > Signed-off-by: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx>
> > ---
> > drivers/input/keyboard/adp5588-keys.c | 27
> +++++++++++++++++++++++++++
> > 1 file changed, 27 insertions(+)
> >
> > diff --git a/drivers/input/keyboard/adp5588-keys.c
> > b/drivers/input/keyboard/adp5588-keys.c
> > index 09bcfc6b9408..572335c8ef0f 100644
> > --- a/drivers/input/keyboard/adp5588-keys.c
> > +++ b/drivers/input/keyboard/adp5588-keys.c
> > @@ -188,6 +188,7 @@ struct adp5588_kpad {
> > u32 cols;
> > u32 unlock_keys[2];
> > int nkeys_unlock;
> > + bool gpio_only;
> > unsigned short keycode[ADP5588_KEYMAPSIZE];
> > unsigned char gpiomap[ADP5588_MAXGPIO];
> > struct gpio_chip gc;
> > @@ -632,6 +633,21 @@ static int adp5588_fw_parse(struct adp5588_kpad
> *kpad)
> > struct i2c_client *client = kpad->client;
> > int ret, i;
> >
> > + /*
> > + * Check if the device is to be operated purely in GPIO mode. To do
> > + * so, check that no keypad rows or columns have been specified,
> > + * since all GPINS should be configured as GPIO.
> > + */
> > + ret = device_property_present(&client->dev,
> > + "keypad,num-rows");
> > + ret |= device_property_present(&client->dev,
> > + "keypad,num-columns");
> > + /* If purely GPIO, skip keypad setup */
> > + if (!ret) {
> > + kpad->gpio_only = true;
> > + return 0;
> > + }
> > +
> > ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows,
> > &kpad->cols);
> > if (ret)
> > @@ -775,6 +791,11 @@ static int adp5588_probe(struct i2c_client *client)
> > if (error)
> > return error;
> >
> > + if (kpad->gpio_only && !client->irq) {
> > + dev_info(&client->dev, "Rev.%d, started as GPIO only\n",
> > revid);
> > + return 0;
> > + }
>
> You're still missing something regarding interrupts. If there's no client->irq
> then you should not setup the gpio_irq_chip. Hence, in adp5588_gpio_add(),
> you
> should have:
>
> if (kpad->client->irq) {
> girq = &kpad->gc.irq;
> gpio_irq_chip_set_chip(girq, &adp5588_irq_chip);
> girq->handler = handle_bad_irq;
> girq->threaded = true;
> }
>
> - Nuno Sá
Thank you for pointing this out, I will add the same.
Thanks,
Utsav