Re: [PATCH 1/3] dt-bindings: power: Add power sequence for Amloigc WCN chips

[Krzysztof Kozlowski]

On 05/07/2024 13:13, Yang Li via B4 Relay wrote:
> From: Yang Li <yang.li@xxxxxxxxxxx>
> 
> Add binding document to introduce power sequence of
> Amlogic WCN chips.
> 
> Signed-off-by: Yang Li <yang.li@xxxxxxxxxxx>
> ---
>  .../bindings/power/amlogic,w155s2-pwrseq.yaml      | 62 ++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/power/amlogic,w155s2-pwrseq.yaml b/Documentation/devicetree/bindings/power/amlogic,w155s2-pwrseq.yaml
> new file mode 100644
> index 000000000000..f99a775fcf9b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/amlogic,w155s2-pwrseq.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/amlogic,w155s2-pwrseq.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic power sequence for WCN chips
> +
> +maintainers:
> +  - Yang Li <yang.li@xxxxxxxxxxx>
> +
> +description:
> +  The Amlogic WCN chip contains discrete modules for WLAN and Bluetooth. Power on
> +  Bluetooth and Wi-Fi respectively, including chip_en pull-up and bt_en pull-up,
> +  and generation of the 32.768KHz clock.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: amlogic,w155s2-pwrseq
> +      - items:
> +          - enum:
> +              - amlogic,w265s1-pwrseq
> +              - amlogic,w265p1-pwrseq
> +              - amlogic,w265s2-pwrseq
> +          - const: amlogic,w155s2-pwrseq
> +
> +  clocks:
> +    maxItems: 1
> +    description: clock provided to the controller (32.768KHz)
> +
> +  clock-names:
> +    items:
> +      - const: ext_clock

Drop _clock... or actually drop entire clock-names, not much helpful.

> +
> +  amlogic,chip-enable-gpios:
> +    maxItems: 1
> +    description: gpio specifier used to enable chipset

For entire chipset? Then enable-gpios

> +
> +  amlogic,bt-enable-gpios:
> +    maxItems: 1
> +    description: gpio specifier used to enable BT

Follow existing bindings for Qualcomm as example.

> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - amlogic,chip-enable-gpios
> +  - amlogic,bt-enable-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    wcn_pwrseq {

No underscores in node names, generic node names.

There is no device as "pwrseq". I also do not get what "wcn" means here.



Best regards,
Krzysztof