[PATCH v2 0/5] Add support for Kontron OSM-S i.MX93 SoM and carrier board

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

Patch 1-2: small DT binding fixups
Patch 3: board DT bindings
Patch 4: support PMIC driver without IRQ
Patch 5: add devicetrees

Changes for v2:
* remove applied patches 1 and 2
* add tags
* improvements suggested by Krzysztof (thanks!)
* add missing Makefile entry for DT

Frieder Schrempf (5):
  dt-bindings: gpio: vf610: Allow gpio-line-names to be set
  dt-bindings: regulator: pca9450: Make interrupt optional
  dt-bindings: arm: fsl: Add Kontron i.MX93 OSM-S based boards
  regulator: pca9450: Make IRQ optional
  arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier
    board

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/gpio/gpio-vf610.yaml  |   4 +
 .../regulator/nxp,pca9450-regulator.yaml      |   1 -
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-kontron-bl-osm-s.dts  | 165 ++++++
 .../dts/freescale/imx93-kontron-osm-s.dtsi    | 547 ++++++++++++++++++
 drivers/regulator/pca9450-regulator.c         |  41 +-
 7 files changed, 742 insertions(+), 23 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi

-- 
2.45.2