[PATCH v2 4/6] Bluetooth: hci_qca: make pwrseq calls the default if available
From: Bartosz Golaszewski
Date: Mon Jul 08 2024 - 05:41:42 EST
From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
If the device has a power sequencing handle, use it first. Otherwise
fall back to whatever code already exists.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
drivers/bluetooth/hci_qca.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 48e1b67577be..9d9553552ee1 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1718,6 +1718,7 @@ static int qca_regulator_init(struct hci_uart *hu)
* off the voltage regulator.
*/
qcadev = serdev_device_get_drvdata(hu->serdev);
+
if (!qcadev->bt_power->vregs_on) {
serdev_device_close(hu->serdev);
ret = qca_regulator_enable(qcadev);
@@ -1800,18 +1801,8 @@ static int qca_power_on(struct hci_dev *hdev)
case QCA_WCN6750:
case QCA_WCN6855:
case QCA_WCN7850:
- ret = qca_regulator_init(hu);
- break;
-
case QCA_QCA6390:
- qcadev = serdev_device_get_drvdata(hu->serdev);
- ret = pwrseq_power_on(qcadev->bt_power->pwrseq);
- if (ret)
- return ret;
-
- ret = qca_port_reopen(hu);
- if (ret)
- return ret;
+ ret = qca_regulator_init(hu);
break;
default:
@@ -2149,6 +2140,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
unsigned long flags;
enum qca_btsoc_type soc_type = qca_soc_type(hu);
bool sw_ctrl_state;
+ struct qca_power *power;
/* From this point we go into power off state. But serial port is
* still open, stop queueing the IBS data and flush all the buffered
@@ -2166,6 +2158,13 @@ static void qca_power_shutdown(struct hci_uart *hu)
return;
qcadev = serdev_device_get_drvdata(hu->serdev);
+ power = qcadev->bt_power;
+
+ if (power->pwrseq) {
+ pwrseq_power_off(power->pwrseq);
+ set_bit(QCA_BT_OFF, &qca->flags);
+ return;
+ }
switch (soc_type) {
case QCA_WCN3988:
@@ -2227,6 +2226,9 @@ static int qca_regulator_enable(struct qca_serdev *qcadev)
struct qca_power *power = qcadev->bt_power;
int ret;
+ if (power->pwrseq)
+ return pwrseq_power_on(power->pwrseq);
+
/* Already enabled */
if (power->vregs_on)
return 0;
--
2.43.0