Re: [PATCH v15 04/10] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3+ driver

[Rob Herring (Arm)]

On Mon, 08 Jul 2024 14:22:35 +0200, Konrad Dybcio wrote:
> From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
> 
> Add the bindings for the Qualcomm CPR3+ hardware.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
> [Konrad: Make binding check pass, some other changes]
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml    | 286 +++++++++++++++++++++
>  1 file changed, 286 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-1:qcom,opp-cloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-1:qcom,opp-oloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-2:qcom,opp-cloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-2:qcom,opp-oloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3:qcom,opp-cloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3:qcom,opp-oloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240708-topic-cpr3h-v15-4-5bc8b8936489@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.