[PATCH net-next v3 3/3] virtio-net: synchronize operstate with admin state on up/down

From: Jason Wang
Date: Tue Jul 09 2024 - 04:04:04 EST


This patch synchronize operstate with admin state per RFC2863.

This is done by trying to toggle the carrier upon open/close and
synchronize with the config change work. This allows propagate status
correctly to stacked devices like:

ip link add link enp0s3 macvlan0 type macvlan
ip link set link enp0s3 down
ip link show

Before this patch:

3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
......
5: macvlan0@enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff

After this patch:

3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
...
5: macvlan0@enp0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff

Cc: Venkat Venkatsubra <venkat.x.venkatsubra@xxxxxxxxxx>
Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@xxxxxxxxxx>
Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
---
drivers/net/virtio_net.c | 64 ++++++++++++++++++++++++----------------
1 file changed, 38 insertions(+), 26 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 0b4747e81464..e6626ba25b29 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2476,6 +2476,25 @@ static void virtnet_cancel_dim(struct virtnet_info *vi, struct dim *dim)
net_dim_work_cancel(dim);
}

+static void virtnet_update_settings(struct virtnet_info *vi)
+{
+ u32 speed;
+ u8 duplex;
+
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
+ return;
+
+ virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
+
+ if (ethtool_validate_speed(speed))
+ vi->speed = speed;
+
+ virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
+
+ if (ethtool_validate_duplex(duplex))
+ vi->duplex = duplex;
+}
+
static int virtnet_open(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
@@ -2494,6 +2513,18 @@ static int virtnet_open(struct net_device *dev)
goto err_enable_qp;
}

+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
+ virtio_config_driver_enable(vi->vdev);
+ /* Do not schedule the config change work as the
+ * config change notification might have been disabled
+ * by the virtio core. */
+ virtio_config_changed(vi->vdev);
+ } else {
+ vi->status = VIRTIO_NET_S_LINK_UP;
+ virtnet_update_settings(vi);
+ netif_carrier_on(dev);
+ }
+
return 0;

err_enable_qp:
@@ -2936,12 +2967,19 @@ static int virtnet_close(struct net_device *dev)
disable_delayed_refill(vi);
/* Make sure refill_work doesn't re-enable napi! */
cancel_delayed_work_sync(&vi->refill);
+ /* Make sure config notification doesn't schedule config work */
+ virtio_config_driver_disable(vi->vdev);
+ /* Make sure status updating is cancelled */
+ cancel_work_sync(&vi->config_work);

for (i = 0; i < vi->max_queue_pairs; i++) {
virtnet_disable_queue_pair(vi, i);
virtnet_cancel_dim(vi, &vi->rq[i].dim);
}

+ vi->status &= ~VIRTIO_NET_S_LINK_UP;
+ netif_carrier_off(dev);
+
return 0;
}

@@ -4640,25 +4678,6 @@ static void virtnet_init_settings(struct net_device *dev)
vi->duplex = DUPLEX_UNKNOWN;
}

-static void virtnet_update_settings(struct virtnet_info *vi)
-{
- u32 speed;
- u8 duplex;
-
- if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
- return;
-
- virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
-
- if (ethtool_validate_speed(speed))
- vi->speed = speed;
-
- virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
-
- if (ethtool_validate_duplex(duplex))
- vi->duplex = duplex;
-}
-
static u32 virtnet_get_rxfh_key_size(struct net_device *dev)
{
return ((struct virtnet_info *)netdev_priv(dev))->rss_key_size;
@@ -6000,13 +6019,6 @@ static int virtnet_probe(struct virtio_device *vdev)
/* Assume link up if device can't report link status,
otherwise get link status from config. */
netif_carrier_off(dev);
- if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
- schedule_work(&vi->config_work);
- } else {
- vi->status = VIRTIO_NET_S_LINK_UP;
- virtnet_update_settings(vi);
- netif_carrier_on(dev);
- }

for (i = 0; i < ARRAY_SIZE(guest_offloads); i++)
if (virtio_has_feature(vi->vdev, guest_offloads[i]))
--
2.31.1