Re: [PATCH net-next v3 0/2] net: stmmac: qcom-ethqos: enable 2.5G ethernet on sa8775p-ride

[Bartosz Golaszewski]

On Tue, Jul 9, 2024 at 5:40 AM <patchwork-bot+netdevbpf@xxxxxxxxxx> wrote:
>
> Hello:
>
> This series was applied to netdev/net-next.git (main)
> by Jakub Kicinski <kuba@xxxxxxxxxx>:
>
> On Wed,  3 Jul 2024 20:14:57 +0200 you wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> >
> > Here are the changes required to enable 2.5G ethernet on sa8775p-ride.
> > As advised by Andrew Lunn and Russell King, I am reusing the existing
> > stmmac infrastructure to enable the SGMII loopback and so I dropped the
> > patches adding new callbacks to the driver core. I also added more
> > details to the commit message and made sure the workaround is only
> > enabled on Rev 3 of the board (with AQR115C PHY). Also: dropped any
> > mentions of the OCSGMII mode.
> >
> > [...]
>
> Here is the summary with links:
>   - [net-next,v3,1/2] net: stmmac: qcom-ethqos: add support for 2.5G BASEX mode
>     https://git.kernel.org/netdev/net-next/c/61e9be0efbe8
>   - [net-next,v3,2/2] net: stmmac: qcom-ethqos: enable SGMII loopback during DMA reset on sa8775p-ride-r3
>     https://git.kernel.org/netdev/net-next/c/3c466d6537b9
>

Hi Jakub,

Does picking these patches up now mean they will still make the v6.11
merge window? If so: could you also consider picking up the associated
PHY changes[1] as - with the DT changes already in next - this is the
last missing bit allowing enabling the 2.5G ethernet on the
sa8775p-ride-r3 board?

Best Regards,
Bartosz

[1] https://lore.kernel.org/netdev/20240708075023.14893-1-brgl@xxxxxxxx/