At 2024-07-09 16:17:06, "Dragan Simic" <dsimic@xxxxxxxxxxx> wrote:
On 2024-07-08 09:46, Andy Yan wrote:
At 2024-07-04 18:35:42, "Dragan Simic" <dsimic@xxxxxxxxxxx> wrote:
On 2024-07-04 04:10, Andy Yan wrote:
At 2024-07-04 07:32:02, "Dragan Simic" <dsimic@xxxxxxxxxxx> wrote:
After the additional firmware-related module information was
introduced by
the commit c0677e41a47f ("drm/rockchip: cdn-dp-core: add
MODULE_FIRMWARE
macro"), there's no longer need for the firmware-loading workarounds
whose
sole purpose was to prevent the missing firmware blob in an initial
ramdisk
from causing driver initialization to fail. Thus, delete the
workarounds,
which removes a sizable chunk of redundant code.
What would happen if there was no ramdisk? And the firmware is in
rootfs ?
For example: A buildroot based tiny embedded system。
Good point, let me explain, please.
In general, if a driver is built into the kernel, there should also be
an initial ramdisk that contains the related firmware blobs, because
it's
unknown is the root filesystem available when the driver is probed.
If
a driver is built as a module and there's no initial ramdisk, having
the related firmware blobs on the root filesystem should be fine,
because
the firmware blobs and the kernel module become available at the same
time, through the root filesystem. [1]
Another option for a driver built statically into the kernel, when
there's
no initial ramdisk, is to build the required firmware blobs into the
kernel
image. [2] Of course, that's feasible only when a kernel image is
built
specificially for some device, because otherwise it would become too
large
because of too many drivers and their firmware blobs becoming
included,
but that seems to fit the Buildroot-based example.
To sum it up, mechanisms already exist in the kernel for various
scenarios
when it comes to loading firmware blobs. Even if the deleted
workaround
attempts to solve some issue specific to some environment, that isn't
the
right place or the right way for solving any issues of that kind.
While preparing this patch, I even tried to find another kernel driver
that
also implements some similar workarounds for firmware loading, to
justify
the existence of such workarounds and to possibly move them into the
kernel's
firmware-loading interface. Alas, I was unable to find such
workarounds
in
other drivers, which solidified my reasoning behind classifying the
removed
code as out-of-place and redundant.
For some tiny embedded system,there is no such ramdisk,for example:
a buildroot based rootfs,the buildroot only generate rootfs。
And FYI, there are mainline drivers try to fix such issue by
defer_probe,for example:
smc_abc[0]
There are also some other similar scenario in gpu driver{1}[2]
[0]https://elixir.bootlin.com/linux/latest/source/drivers/tee/optee/smc_abi.c#L1518
[1]https://patchwork.kernel.org/project/dri-devel/patch/20240109120604.603700-1-javierm@xxxxxxxxxx/
[2]https://lore.kernel.org/dri-devel/87y1918psd.fsf@xxxxxxxxxxxx-host-address-is-not-set/T/
Thanks for providing these examples.
Before I continue thinking about the possible systemic solution,
could you please clarify the way Buildroot builds the kernel and
prepares the root filesystem? I'm not familiar with Buildroot,
but it seems to me that it builds the drivers statically into the
produced kernel image, while it places the related firmware blobs
into the produced root filesystem. Am I right there?
in practice we can chose build the drivers statically into the kernel,
we can also build it as a module。
And in both case, the firmware blobs are put in rootfs。
If the drivers is built as a module, the module will also put in rootfs,
so its fine。
But if a drivers is built into the kernel ,it maybe can't access the
firmware blob
before the rootfs is mounted.
So we can see some drivers try to use DEFER_PROBE to fix this issue.
As I already wrote earlier, and as the above-linked discussions
conclude, solving these issues doesn't belong to any specific driver.
It should be resolved within the kernel's firmware loading mechanism
instead, and no driver should be specific in that regard.
IT would be good if it can be resolved within the kernel's firmware
loading mechanism.
[1]
https://www.kernel.org/doc/Documentation/driver-api/firmware/direct-fs-lookup.rst
[2]
https://www.kernel.org/doc/Documentation/driver-api/firmware/built-in-fw.rst
Various utilities used by Linux distributions to generate initial
ramdisks
need to obey the firmware-related module information, so we can rely
on the
firmware blob being present in the generated initial ramdisks.
Signed-off-by: Dragan Simic <dsimic@xxxxxxxxxxx>
---
drivers/gpu/drm/rockchip/cdn-dp-core.c | 53
+++++---------------------
1 file changed, 10 insertions(+), 43 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c
b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index bd7aa891b839..e1a7c6a1172b 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -44,9 +44,9 @@ static inline struct cdn_dp_device
*encoder_to_dp(struct drm_encoder *encoder)
#define DPTX_HPD_DEL (2 << 12)
#define DPTX_HPD_SEL_MASK (3 << 28)
-#define CDN_FW_TIMEOUT_MS (64 * 1000)
#define CDN_DPCD_TIMEOUT_MS 5000
#define CDN_DP_FIRMWARE "rockchip/dptx.bin"
+
MODULE_FIRMWARE(CDN_DP_FIRMWARE);
struct cdn_dp_data {
@@ -909,61 +909,28 @@ static int cdn_dp_audio_codec_init(struct
cdn_dp_device *dp,
return PTR_ERR_OR_ZERO(dp->audio_pdev);
}
-static int cdn_dp_request_firmware(struct cdn_dp_device *dp)
-{
- int ret;
- unsigned long timeout = jiffies +
msecs_to_jiffies(CDN_FW_TIMEOUT_MS);
- unsigned long sleep = 1000;
-
- WARN_ON(!mutex_is_locked(&dp->lock));
-
- if (dp->fw_loaded)
- return 0;
-
- /* Drop the lock before getting the firmware to avoid blocking
boot
*/
- mutex_unlock(&dp->lock);
-
- while (time_before(jiffies, timeout)) {
- ret = request_firmware(&dp->fw, CDN_DP_FIRMWARE, dp->dev);
- if (ret == -ENOENT) {
- msleep(sleep);
- sleep *= 2;
- continue;
- } else if (ret) {
- DRM_DEV_ERROR(dp->dev,
- "failed to request firmware: %d\n", ret);
- goto out;
- }
-
- dp->fw_loaded = true;
- ret = 0;
- goto out;
- }
-
- DRM_DEV_ERROR(dp->dev, "Timed out trying to load firmware\n");
- ret = -ETIMEDOUT;
-out:
- mutex_lock(&dp->lock);
- return ret;
-}
-
static void cdn_dp_pd_event_work(struct work_struct *work)
{
struct cdn_dp_device *dp = container_of(work, struct cdn_dp_device,
event_work);
struct drm_connector *connector = &dp->connector;
enum drm_connector_status old_status;
-
int ret;
mutex_lock(&dp->lock);
if (dp->suspended)
goto out;
- ret = cdn_dp_request_firmware(dp);
- if (ret)
- goto out;
+ if (!dp->fw_loaded) {
+ ret = request_firmware(&dp->fw, CDN_DP_FIRMWARE, dp->dev);
+ if (ret) {
+ DRM_DEV_ERROR(dp->dev, "Loading firmware failed: %d\n", ret);
+ goto out;
+ }
+
+ dp->fw_loaded = true;
+ }
dp->connected = true;