[PATCH V3 00/13] media: qcom: camss: Add sm8550 support

[Depeng Shao]

V3:
- Rebased the change based on below change which will be merged firstly.
  "Move camss version related defs in to resources"
Link: https://lore.kernel.org/all/20240522154659.510-1-quic_grosikop@xxxxxxxxxxx/
- Rebased the change based on Bryan's csiphy optimization change and add
these changes into this series, so that the new csiphy-3ph driver don't
need to add duplicate code. This has got Bryan's permission to add his
patches into this series.
- Refactor some changes based on the comments to move the random code to
patches where they are used.
- Remove the vfe780 irq function since it isn't doing the actual work.
- Add dt-binding for sm8550 camss driver.
Link to V2: https://lore.kernel.org/all/20240320141136.26827-1-quic_depengs@xxxxxxxxxxx/

V2:
- Update some commit messages
Link to V1: https://lore.kernel.org/all/20240320134227.16587-1-quic_depengs@xxxxxxxxxxx/

V1:
SM8550 is a Qualcomm flagship SoC. This series adds support to
bring up the CSIPHY, CSID, VFE/RDI interfaces in SM8550.

SM8550 provides

- 3 x VFE, 3 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE
- 3 x CSID
- 2 x CSID Lite
- 8 x CSI PHY

This series is rebased based on: "Move camss version related defs in to resources"
Link: https://lore.kernel.org/all/20240522154659.510-1-quic_grosikop@xxxxxxxxxxx/

Bryan O'Donoghue (6):
  media: qcom: camss: csiphy-3ph: Fix trivial indentation fault in
    defines
  media: qcom: camss: csiphy-3ph: Remove redundant PHY init sequence
    control loop
  media: qcom: camss: csiphy-3ph: Rename struct
  media: qcom: camss: csiphy: Add an init callback to CSI PHY devices
  media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field
    inside csiphy struct
  media: qcom: camss: csiphy-3ph: Use an offset variable to find common
    control regs

Depeng Shao (7):
  dt-bindings: media: camss: Add qcom,sm8550-camss binding
  media: qcom: camss: csiphy-3ph: Add Gen2 v1.2 two-phase MIPI CSI-2
    DPHY init
  media: qcom: camss: Add CSID Gen3 support for SM8550
  media: qcom: camss: Add support for VFE hardware version Titan 780
  media: qcom: camss: Add notify interface in camss driver
  media: qcom: camss: Add sm8550 support
  media: qcom: camss: Add sm8550 resources

 .../bindings/media/qcom,sm8550-camss.yaml     | 545 ++++++++++++
 drivers/media/platform/qcom/camss/Makefile    |   2 +
 .../platform/qcom/camss/camss-csid-gen3.c     | 483 +++++++++++
 .../platform/qcom/camss/camss-csid-gen3.h     |  26 +
 .../media/platform/qcom/camss/camss-csid.c    |  21 +
 .../media/platform/qcom/camss/camss-csid.h    |  11 +
 .../qcom/camss/camss-csiphy-2ph-1-0.c         |   6 +
 .../qcom/camss/camss-csiphy-3ph-1-0.c         | 796 ++++++++++--------
 .../media/platform/qcom/camss/camss-csiphy.c  |   4 +
 .../media/platform/qcom/camss/camss-csiphy.h  |   2 +
 .../media/platform/qcom/camss/camss-vfe-780.c | 429 ++++++++++
 drivers/media/platform/qcom/camss/camss-vfe.c |   6 +
 drivers/media/platform/qcom/camss/camss-vfe.h |   2 +
 drivers/media/platform/qcom/camss/camss.c     | 462 ++++++++++
 drivers/media/platform/qcom/camss/camss.h     |  10 +
 15 files changed, 2467 insertions(+), 338 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
 create mode 100644 drivers/media/platform/qcom/camss/camss-csid-gen3.c
 create mode 100644 drivers/media/platform/qcom/camss/camss-csid-gen3.h
 create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-780.c


base-commit: 0c52056d9f77508cb6d4d68d3fc91c6c08ec71af
prerequisite-patch-id: 74fabfbf51d650af74a1dc9f7e09fe03a1d85d93
prerequisite-patch-id: 3833c5eed2690679e5eca3551053e08350d2b070
prerequisite-patch-id: 0e433e0c5a9d2402da97c1a01194b1a9f6f7e6cb
prerequisite-patch-id: f876f5ed5605fcfebea7f1584888f494bfecd102
prerequisite-patch-id: 8bcb15b208a319a6e88ff4f9e5023097af92cc90
prerequisite-patch-id: dc4b5ddbbedd8773159694b3becad5c7dcbfcf77
prerequisite-patch-id: 75c1b00f4476ee6006041046ad5194b086db3358
prerequisite-patch-id: 0efc004cb8a844291ebe1f16ce192567f44218c7
-- 
2.34.1