[PATCH 3/4] dt-bindings: pinctrl: qcom,ipq4019-pinctrl: convert to dtschema
From: Rayyan Ansari
Date: Tue Jul 09 2024 - 12:27:12 EST
Convert the Qualcomm IPQ4019 TLMM block bindings from text to yaml dt
schema format.
Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
---
.../bindings/pinctrl/qcom,ipq4019-pinctrl.txt | 85 ---------------
.../pinctrl/qcom,ipq4019-pinctrl.yaml | 102 ++++++++++++++++++
2 files changed, 102 insertions(+), 85 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
deleted file mode 100644
index 97858a7c07a2..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Qualcomm Atheros IPQ4019 TLMM block
-
-This is the Top Level Mode Multiplexor block found on the Qualcomm IPQ8019
-platform, it provides pinctrl, pinmux, pinconf, and gpiolib facilities.
-
-Required properties:
-- compatible: "qcom,ipq4019-pinctrl"
-- reg: Should be the base address and length of the TLMM block.
-- interrupts: Should be the parent IRQ of the TLMM block.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
- The first cell is the gpio pin number and the
- second cell is used for optional parameters.
-- gpio-ranges: see ../gpio/gpio.txt
-
-Optional properties:
-
-- gpio-reserved-ranges: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
- drive-strength.
-
-Non-empty subnodes must specify the 'pins' property.
-Note that not all properties are valid for all pins.
-
-
-Valid values for qcom,pins are:
- gpio0-gpio99
- Supports mux, bias and drive-strength
-
-Valid values for qcom,function are:
-aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0, blsp_spi1, blsp_uart0,
-blsp_uart1, chip_rst, gpio, i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx,
-jtag, led0, led1, led2, led3, led4, led5, led6, led7, led8, led9, led10, led11,
-mdc, mdio, pcie, pmu, prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1,
-smart2, smart3, tm, wifi0, wifi1
-
-Example:
-
- tlmm: pinctrl@1000000 {
- compatible = "qcom,ipq4019-pinctrl";
- reg = <0x1000000 0x300000>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 100>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 208 0>;
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.yaml
new file mode 100644
index 000000000000..ebf74e48ec5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq4019-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ4019 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ4019 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,ipq4019-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq4019-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq4019-tlmm-state"
+ additionalProperties: false
+
+ "-hog(-[0-9]+)?$":
+ required:
+ - gpio-hog
+
+$defs:
+ qcom-ipq4019-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-9][0-9])$"
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0,
+ blsp_spi1, blsp_uart0, blsp_uart1, chip_rst, gpio,
+ i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx,
+ jtag, led0, led1, led2, led3, led4, led5, led6, led7,
+ led8, led9, led10, led11, mdc, mdio, pcie, pmu,
+ prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1,
+ smart2, smart3, tm, wifi0, wifi1 ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq4019-pinctrl";
+ reg = <0x01000000 0x300000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart-state {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
--
2.45.2