[PATCH v3 1/2] i2c: smbus: remove i801 assumptions from SPD probing

[Thomas Weißschuh]

The check and warning are very specific to the SPD usage of the i801
driver. That was fine as long as i801 was the only caller of
i2c_register_spd(). Now that piix4 will be added as another user of that
function, the check and warning are not accurate anymore.
Instead of introducing a more complicated calling protocol only to print
a warning, drop the warning.
Even in cases where not all slots can be probed,
then at least probe the 8 slots that can be.

Signed-off-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
---
 drivers/i2c/i2c-smbus.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index f809f0ef2004..f0ac35fd0c5a 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -352,18 +352,11 @@ void i2c_register_spd(struct i2c_adapter *adap)
 		return;
 
 	/*
-	 * If we're a child adapter on a muxed segment, then limit slots to 8,
-	 * as this is the max number of SPD EEPROMs that can be addressed per bus.
+	 * The max number of SPD EEPROMs that can be addressed per bus is 8.
+	 * If more slots are present either muxed or multiple busses are
+	 * necessary or the additional slots are ignored.
 	 */
-	if (i2c_parent_is_i2c_adapter(adap)) {
-		slot_count = 8;
-	} else {
-		if (slot_count > 8) {
-			dev_warn(&adap->dev,
-				 "More than 8 memory slots on a single bus, contact i801 maintainer to add missing mux config\n");
-			return;
-		}
-	}
+	slot_count = min(slot_count, 8);
 
 	/*
 	 * Memory types could be found at section 7.18.2 (Memory Device — Type), table 78

-- 
2.45.2