Re: [PATCH 1/6] dt-bindings: clocks: add binding for generic clock-generators

[Alexander Stein]

Hello Heiko,

Am Dienstag, 9. Juli 2024, 14:31:16 CEST schrieb Heiko Stuebner:
> In contrast to fixed clocks that are described as ungateable, boards
> sometimes use additional clock generators for things like PCIe reference
> clocks, that need actual supplies to get enabled and enable-gpios to be
> toggled for them to work.

Fixed clocks are intended to be ungateable? Where does this come from?

> This adds a binding for such clock generators that are not configurable
> themself, but need to handle supplies for them to work.
> 
> While in a lot of cases the type of the IC used is described in board
> schematics, in some cases just a generic type description like
> "100MHz, 3.3V" might also be used. The binding therefore allows both
> cases. Specifying the type is of course preferred.
> 
> The clock-frequency is set in devicetree, because while some clock
> generators have pins to decide between multipls output rates, those
> are generally set statically on the board-layout-level.
> 
> Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
> ---
>  .../bindings/clock/clock-generator.yaml       | 62 +++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/clock-generator.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/clock-generator.yaml b/Documentation/devicetree/bindings/clock/clock-generator.yaml
> new file mode 100644
> index 0000000000000..f44e61e414e89
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/clock-generator.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/clock-generator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Simple clock generators
> +
> +maintainers:
> +  - Heiko Stuebner <heiko@xxxxxxxxx>
> +
> +properties:
> +  $nodename:
> +    anyOf:
> +      - description:
> +          Preferred name is 'clock-<freq>' with <freq> being the output
> +          frequency as defined in the 'clock-frequency' property.
> +        pattern: "^clock-([0-9]+|[a-z0-9-]+)$"
> +      - description: Any name allowed
> +        deprecated: true
> +
> +  compatible:
> +    oneOf:
> +      - const: clock-generator
> +      - items:
> +          - enum:
> +              - diodes,pi6c557-03b
> +              - diodes,pi6c557-05b
> +          - const: clock-generator
> +
> +  "#clock-cells":
> +    const: 0
> +
> +  clock-frequency: true
> +
> +  clock-output-names:
> +    maxItems: 1
> +
> +  enable-gpios:
> +    description:
> +      Contains a single GPIO specifier for the GPIO that enables and disables
> +      the clock generator.
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: handle of the regulator that provides the supply voltage

So essentially only enable-gpios and vdd-supply is added in comparison to
fixed-clock. Does it make sense to add that to the fixed-clocks instead?
Similar to fixed-regulator.

> +
> +required:
> +  - compatible
> +  - "#clock-cells"
> +  - clock-frequency

With this list it's essentially the same as fixed-clock.

Best regards,
Alexander

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    clock {
> +      compatible = "clock-generator";
> +      #clock-cells = <0>;
> +      clock-frequency = <1000000000>;
> +    };
> +...
> 


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/