Re: [PATCH v1] arm64: dts: qcom: sa8775p: Add UART node

[Krzysztof Kozlowski]

On 10/07/2024 11:41, Viken Dadhaniya wrote:
> Add missing UART configuration for sa8775.
> 
> Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 231 ++++++++++++++++++++++++++
>  1 file changed, 231 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 23f1b2e5e624..c107ee40341d 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: BSD-3-Clause
>  /*
>   * Copyright (c) 2023, Linaro Limited
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
>   */
>  
>  #include <dt-bindings/interconnect/qcom,icc.h>
> @@ -657,6 +658,21 @@
>  				status = "disabled";
>  			};
>  
> +			uart14: serial@880000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0x00880000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> +				clock-names = "se";
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> +						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> +						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> +						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
> +				interconnect-names = "qup-core", "qup-config";
> +				power-domains = <&rpmhpd SA8775P_CX>;

All the clocks, interconenct and power domains look to me questionable.
AFAIK, most of it (if not all) is going to be removed.

Best regards,
Krzysztof