Re: [PATCH v1 net-next] leds: trigger: netdev: Add support for tx_err and rx_err notification with LEDs

[Andrew Lunn]

On Wed, Jul 10, 2024 at 12:06:51PM +0200, Lukasz Majewski wrote:
> This patch provides support for enabling blinking of LEDs when RX or TX
> errors are detected.
> 
> Approach taken in this patch is similar to one for TX or RX data
> transmission indication (i.e. TRIGGER_NETDEV_TX/RX attribute).
> 
> One can inspect transmission errors with:
> ip -s link show eth0
> 
> Example LED configuration:
> cd /sys/devices/platform/amba_pl@0/a001a000.leds/leds/
> echo netdev > mode:blue/trigger && \
> echo eth0 > mode:blue/device_name && \
> echo 1 > mode:blue/tx_err
> 
> Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew