Re: [PATCH] tpm: Add new device/vendor ID 0x50666666
From: Jett Rink
Date: Wed Jul 10 2024 - 11:59:55 EST
Would it be possible to get feedback on this patch that just adds a
new DID_VID please?
-Jett
On Wed, Jun 26, 2024 at 8:03 AM Jett Rink <jettrink@xxxxxxxxxxxx> wrote:
>
> I wanted to check the status of this review. Is there something I did
> incorrectly?
>
> -Jett
>
> On Mon, Jun 10, 2024 at 1:25 PM Jett Rink <jettrink@xxxxxxxxxxxx> wrote:
> >
> > Accept another DID:VID for the next generation Google TPM. This TPM
> > has the same Ti50 firmware and fulfills the same interface.
> >
> > Signed-off-by: Jett Rink <jettrink@xxxxxxxxxxxx>
> > ---
> >
> > drivers/char/tpm/tpm_tis_i2c_cr50.c | 11 ++++++++---
> > 1 file changed, 8 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > index 86c9a1a43adb..d9b6abdcda5f 100644
> > --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > @@ -32,7 +32,8 @@
> > #define TPM_CR50_TIMEOUT_SHORT_MS 2 /* Short timeout during transactions */
> > #define TPM_CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */
> > #define TPM_CR50_I2C_DID_VID 0x00281ae0L /* Device and vendor ID reg value */
> > -#define TPM_TI50_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
> > +#define TPM_TI50_DT_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
> > +#define TPM_TI50_OT_I2C_DID_VID 0x50666666L /* Device and vendor ID reg value */
> > #define TPM_CR50_I2C_MAX_RETRIES 3 /* Max retries due to I2C errors */
> > #define TPM_CR50_I2C_RETRY_DELAY_LO 55 /* Min usecs between retries on I2C */
> > #define TPM_CR50_I2C_RETRY_DELAY_HI 65 /* Max usecs between retries on I2C */
> > @@ -781,13 +782,17 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
> > }
> >
> > vendor = le32_to_cpup((__le32 *)buf);
> > - if (vendor != TPM_CR50_I2C_DID_VID && vendor != TPM_TI50_I2C_DID_VID) {
> > + if (vendor != TPM_CR50_I2C_DID_VID &&
> > + vendor != TPM_TI50_DT_I2C_DID_VID &&
> > + vendor != TPM_TI50_OT_I2C_DID_VID) {
> > dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> > return -ENODEV;
> > }
> >
> > dev_info(dev, "%s TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > - vendor == TPM_TI50_I2C_DID_VID ? "ti50" : "cr50",
> > + vendor == TPM_CR50_I2C_DID_VID ? "cr50" :
> > + vendor == TPM_TI50_DT_I2C_DID_VID ? "ti50 DT" :
> > + "ti50 OT",
> > client->addr, client->irq, vendor >> 16);
> > return tpm_chip_register(chip);
> > }
> > --
> > 2.45.2.505.gda0bf45e8d-goog
> >