Re: [PATCH v1] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node

[Anand Moon]

Hi Jonas,

On Wed, 10 Jul 2024 at 20:11, Jonas Karlman <jonas@xxxxxxxxx> wrote:
>
> Hi Anand,
>
> On 2024-07-10 16:19, Anand Moon wrote:
> > Add missing pinctrl settings for PCIe 3.0 x4 clock request and wake
> > signals. Rename node from 'pcie3' to 'pcie30x4' to align with schematic
> > nomenclature.
> >
> > Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> > ---
> >  .../boot/dts/rockchip/rk3588-rock-5b.dts      | 20 +++++++++++++------
> >  1 file changed, 14 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > index 2e7512676b7e..a9b55b7996cf 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > @@ -301,7 +301,7 @@ &pcie30phy {
> >
> >  &pcie3x4 {
> >       pinctrl-names = "default";
> > -     pinctrl-0 = <&pcie3_rst>;
> > +     pinctrl-0 = <&pcie30x4_perstn_m1 &pcie30x4_clkreqn_m1 &pcie30x4_waken_m1>;
> >       reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
> >       vpcie3v3-supply = <&vcc3v3_pcie30>;
> >       status = "okay";
> > @@ -340,14 +340,22 @@ pcie2_2_rst: pcie2-2-rst {
> >               };
> >       };
> >
> > -     pcie3 {
> > -             pcie3_rst: pcie3-rst {
> > -                     rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> > -             };
> > -
> > +     pcie30x4 {
> >               pcie3_vcc3v3_en: pcie3-vcc3v3-en {
> >                       rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> >               };
> > +
> > +             pcie30x4_clkreqn_m1: pcie30x4-clkreqn-m1 {
> > +                     rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
> > +             };
> > +
> > +             pcie30x4_waken_m1: pcie30x4-waken-m1 {
> > +                     rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
> > +             };
>
> Should these not be routed to the clkreqn_m1 and waken_m1 function
> instead of gpio function?
>
> E.g. something like:
>
>                 pcie30x4m1_pins: pcie30x4m1-pins {
>                         rockchip,pins =
>                                 <4 RK_PB4 4 &pcfg_pull_none>,
>                                 <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
>                                 <4 RK_PB5 4 &pcfg_pull_none>;
>                 };
>
> There are other rk35xx boards where only the perstn pin is configured
> and could use a similar fix.
>

I understand this grouping for Gpio, but I am not very familiar with
this feature.

> Regards,
> Jonas
>
Thanks
-Anand