Re: [RFC PATCH 1/9] PCI/AER: Update AER driver to call root port and downstream port UCE handlers

From: nifan . cxl
Date: Wed Jul 10 2024 - 16:48:47 EST


On Mon, Jun 24, 2024 at 12:56:29PM -0500, Terry Bowman wrote:
> Hi Dan,
>
> I added a response below.
>
> On 6/21/24 14:17, Dan Williams wrote:
> > Terry Bowman wrote:
> >> The AER service driver does not currently call a handler for AER
> >> uncorrectable errors (UCE) detected in root ports or downstream
> >> ports. This is not needed in most cases because common PCIe port
> >> functionality is handled by portdrv service drivers.
> >>
> >> CXL root ports include CXL specific RAS registers that need logging
> >> before starting do_recovery() in the UCE case.
> >>
> >> Update the AER service driver to call the UCE handler for root ports
> >> and downstream ports. These PCIe port devices are bound to the portdrv
> >> driver that includes a CE and UCE handler to be called.
> >>
> >> Signed-off-by: Terry Bowman <terry.bowman@xxxxxxx>
> >> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> >> Cc: linux-pci@xxxxxxxxxxxxxxx
> >> ---
> >> drivers/pci/pcie/err.c | 20 ++++++++++++++++++++
> >> 1 file changed, 20 insertions(+)
> >>
> >> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> >> index 705893b5f7b0..a4db474b2be5 100644
> >> --- a/drivers/pci/pcie/err.c
> >> +++ b/drivers/pci/pcie/err.c
> >> @@ -203,6 +203,26 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> >> pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
> >> struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
> >>
> >> + /*
> >> + * PCIe ports may include functionality beyond the standard
> >> + * extended port capabilities. This may present a need to log and
> >> + * handle errors not addressed in this driver. Examples are CXL
> >> + * root ports and CXL downstream switch ports using AER UIE to
> >> + * indicate CXL UCE RAS protocol errors.
> >> + */
> >> + if (type == PCI_EXP_TYPE_ROOT_PORT ||
> >> + type == PCI_EXP_TYPE_DOWNSTREAM) {
> >> + struct pci_driver *pdrv = dev->driver;
> >> +
> >> + if (pdrv && pdrv->err_handler &&
> >> + pdrv->err_handler->error_detected) {
> >> + const struct pci_error_handlers *err_handler;
> >> +
> >> + err_handler = pdrv->err_handler;
> >> + status = err_handler->error_detected(dev, state);
> >> + }
> >> + }
> >> +
> >
> > Would not a more appropriate place for this be pci_walk_bridge() where
> > the ->subordinate == NULL and these type-check cases are unified?
>
> It does. I can take a look at moving that.

Has that already been handled in pci_walk_bridge?

The function pci_walk_bridge() will call report_error_detected, where
the err handler will be called.
https://elixir.bootlin.com/linux/v6.10-rc6/source/drivers/pci/pcie/err.c#L80

Fan

>
> Regards,
> Terry