[PATCH] drm/ast: add multiple connectors support
From: oushixiong1025
Date: Thu Jul 11 2024 - 05:02:00 EST
From: Shixiong Ou <oushixiong@xxxxxxxxxx>
[WHY]
The AST2600 tx_chip_types will be detected as AST_TX_DP, but some BMC
boards that use AST2600 use the VGA interface instead of the DP interface.
In this case, it will use Virtual connector as the DP is disconnected.
[HOW]
Allows multiple physical connectors to exist at the same time.
Signed-off-by: Shixiong Ou <oushixiong@xxxxxxxxxx>
---
drivers/gpu/drm/ast/ast_drv.h | 6 ++++-
drivers/gpu/drm/ast/ast_main.c | 8 +++----
drivers/gpu/drm/ast/ast_mode.c | 40 ++++++++++++++++++++--------------
3 files changed, 33 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h
index ba3d86973995..e326124b3fec 100644
--- a/drivers/gpu/drm/ast/ast_drv.h
+++ b/drivers/gpu/drm/ast/ast_drv.h
@@ -150,9 +150,13 @@ static inline struct ast_plane *to_ast_plane(struct drm_plane *plane)
* BMC
*/
+#define MAX_CONNECTORS 2
+
struct ast_bmc_connector {
struct drm_connector base;
- struct drm_connector *physical_connector;
+
+ struct drm_connector *physical_connectors[MAX_CONNECTORS];
+ int count;
};
static inline struct ast_bmc_connector *
diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
index 0637abb70361..428529749ae6 100644
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -85,7 +85,7 @@ static void ast_detect_tx_chip(struct ast_device *ast, bool need_post)
if (!need_post) {
jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xff);
if (jreg & 0x80)
- ast->tx_chip_types = AST_TX_SIL164_BIT;
+ ast->tx_chip_types |= AST_TX_SIL164_BIT;
}
if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast) || IS_AST_GEN6(ast)) {
@@ -97,7 +97,7 @@ static void ast_detect_tx_chip(struct ast_device *ast, bool need_post)
jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, 0xff);
switch (jreg) {
case 0x04:
- ast->tx_chip_types = AST_TX_SIL164_BIT;
+ ast->tx_chip_types |= AST_TX_SIL164_BIT;
break;
case 0x08:
ast->dp501_fw_addr = drmm_kzalloc(dev, 32*1024, GFP_KERNEL);
@@ -110,12 +110,12 @@ static void ast_detect_tx_chip(struct ast_device *ast, bool need_post)
}
fallthrough;
case 0x0c:
- ast->tx_chip_types = AST_TX_DP501_BIT;
+ ast->tx_chip_types |= AST_TX_DP501_BIT;
}
} else if (IS_AST_GEN7(ast)) {
if (ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xD1, TX_TYPE_MASK) ==
ASTDP_DPMCU_TX) {
- ast->tx_chip_types = AST_TX_ASTDP_BIT;
+ ast->tx_chip_types |= AST_TX_ASTDP_BIT;
ast_dp_launch(&ast->base);
}
}
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 6695af70768f..31a49d32e506 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -1717,7 +1717,8 @@ static int ast_bmc_connector_helper_detect_ctx(struct drm_connector *connector,
bool force)
{
struct ast_bmc_connector *bmc_connector = to_ast_bmc_connector(connector);
- struct drm_connector *physical_connector = bmc_connector->physical_connector;
+ struct drm_connector *physical_connector;
+ int i, count = bmc_connector->count;
/*
* Most user-space compositors cannot handle more than one connected
@@ -1730,10 +1731,13 @@ static int ast_bmc_connector_helper_detect_ctx(struct drm_connector *connector,
* than one connector per CRTC. The BMC should always be connected.
*/
- if (physical_connector && physical_connector->status == connector_status_disconnected)
- return connector_status_connected;
+ for (i = 0; i < count; i++) {
+ physical_connector = bmc_connector->physical_connectors[i];
+ if (physical_connector && physical_connector->status == connector_status_connected)
+ return connector_status_disconnected;
+ }
- return connector_status_disconnected;
+ return connector_status_connected;
}
static int ast_bmc_connector_helper_get_modes(struct drm_connector *connector)
@@ -1756,10 +1760,11 @@ static const struct drm_connector_funcs ast_bmc_connector_funcs = {
static int ast_bmc_connector_init(struct drm_device *dev,
struct ast_bmc_connector *bmc_connector,
- struct drm_connector *physical_connector)
+ struct drm_connector **physical_connector,
+ int count)
{
struct drm_connector *connector = &bmc_connector->base;
- int ret;
+ int i, ret;
ret = drm_connector_init(dev, connector, &ast_bmc_connector_funcs,
DRM_MODE_CONNECTOR_VIRTUAL);
@@ -1768,13 +1773,16 @@ static int ast_bmc_connector_init(struct drm_device *dev,
drm_connector_helper_add(connector, &ast_bmc_connector_helper_funcs);
- bmc_connector->physical_connector = physical_connector;
+ for (i = 0; i < count; i++)
+ bmc_connector->physical_connectors[i] = physical_connector[i];
+ bmc_connector->count = count;
return 0;
}
static int ast_bmc_output_init(struct ast_device *ast,
- struct drm_connector *physical_connector)
+ struct drm_connector **physical_connector,
+ int count)
{
struct drm_device *dev = &ast->base;
struct drm_crtc *crtc = &ast->crtc;
@@ -1790,7 +1798,7 @@ static int ast_bmc_output_init(struct ast_device *ast,
return ret;
encoder->possible_crtcs = drm_crtc_mask(crtc);
- ret = ast_bmc_connector_init(dev, bmc_connector, physical_connector);
+ ret = ast_bmc_connector_init(dev, bmc_connector, physical_connector, count);
if (ret)
return ret;
@@ -1852,8 +1860,8 @@ static const struct drm_mode_config_funcs ast_mode_config_funcs = {
int ast_mode_config_init(struct ast_device *ast)
{
struct drm_device *dev = &ast->base;
- struct drm_connector *physical_connector = NULL;
- int ret;
+ struct drm_connector *physical_connector[MAX_CONNECTORS] = {NULL};
+ int count, ret;
ret = drmm_mutex_init(dev, &ast->modeset_lock);
if (ret)
@@ -1897,27 +1905,27 @@ int ast_mode_config_init(struct ast_device *ast)
ret = ast_vga_output_init(ast);
if (ret)
return ret;
- physical_connector = &ast->output.vga.connector;
+ physical_connector[count++] = &ast->output.vga.connector;
}
if (ast->tx_chip_types & AST_TX_SIL164_BIT) {
ret = ast_sil164_output_init(ast);
if (ret)
return ret;
- physical_connector = &ast->output.sil164.connector;
+ physical_connector[count++] = &ast->output.sil164.connector;
}
if (ast->tx_chip_types & AST_TX_DP501_BIT) {
ret = ast_dp501_output_init(ast);
if (ret)
return ret;
- physical_connector = &ast->output.dp501.connector;
+ physical_connector[count++] = &ast->output.dp501.connector;
}
if (ast->tx_chip_types & AST_TX_ASTDP_BIT) {
ret = ast_astdp_output_init(ast);
if (ret)
return ret;
- physical_connector = &ast->output.astdp.connector;
+ physical_connector[count++] = &ast->output.astdp.connector;
}
- ret = ast_bmc_output_init(ast, physical_connector);
+ ret = ast_bmc_output_init(ast, physical_connector, count);
if (ret)
return ret;
--
2.25.1