Re: [PATCH v5 1/7] Documentation: firmware-guide: add NXP i.MX95 SCMI documentation

[Cristian Marussi]

On Fri, Jun 21, 2024 at 03:04:36PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@xxxxxxx>
> 
> Add NXP i.MX95 System Control Management Interface(SCMI) vendor
> extensions protocol documentation.
> 

Hi,

beside the final location of this file in the tree, and a few nitpicks
down below.

LGTM.
Reviewed-by: Cristian Marussi <cristian.marussi@xxxxxxx>

> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---

[snip]

> +MISC_CONTROL_GET
> +~~~~~~~~~~~~~~~~
> +
> +message_id: 0x4
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of the control                                       |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the control was get successfully.              |
> +|                  |NOT_FOUND: if the index is not valid.                      |
> +|                  |DENIED: if the agent does not have permission to get the   |
> +|                  |control                                                    |
> ++------------------+-----------------------------------------------------------+
> +|uint32 num        |Size of the return data in words, max 8                    |
> ++------------------+-----------------------------------------------------------+
> +|uint32            |                                                           |
> +|val[0, num - 8]   |value data array                                           |

    val[0, num - 1]   --- typo ?

which I suppose means that this  field is variable in size depending on
num value...

In the gneral SCMI spec I think usually we write something like

   uint32 val[N] with N as specified in num.

... but I am fine even with this val[0, num - 1] if it is intended to
meanb this same thing, i.e. variable size field depending on another
field.

> ++------------------+-----------------------------------------------------------+
> +
> +MISC_CONTROL_ACTION
> +~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x5
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of the control                                       |
> ++------------------+-----------------------------------------------------------+
> +|uint32 action	   |Action for the control                                     |
> ++------------------+-----------------------------------------------------------+
> +|uint32 numarg	   |Size of the argument data, max 8                           |
> ++------------------+-----------------------------------------------------------+
> +|uint32            |                                                           |
> +|arg[0, numarg -1] |Argument data array                                        |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the action was set successfully.               |
> +|                  |NOT_FOUND: if the index is not valid.                      |
> +|                  |DENIED: if the agent does not have permission to get the   |
> +|                  |control                                                    |
> ++------------------+-----------------------------------------------------------+
> +|uint32 num        |Size of the return data in words, max 8                    |
> ++------------------+-----------------------------------------------------------+
> +|uint32            |                                                           |
> +|val[0:num-1]      |value data array                                           |

    val[0, num - 1] ... for consistency

> ++------------------+-----------------------------------------------------------+
> +
> +MISC_DISCOVER_BUILD_INFO
> +~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +This function is used to obtain the build commit, data, time, number.
> +
> +message_id: 0x6
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the build info was got successfully.           |
> +|                  |NOT_SUPPORTED: if the data is not available.               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 buildnum   |Build number                                               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 buildcommit|Most significant 32 bits of the git commit hash            |
> ++------------------+-----------------------------------------------------------+
> +|uint8 date[16]    |Date of build. Null terminated ASCII string of up to 16    |
> +|                  |bytes in length                                            |
> ++------------------+-----------------------------------------------------------+
> +|uint8 time[16]    |Time of build. Null terminated ASCII string of up to 16    |
> +|                  |bytes in length                                            |
> ++------------------+-----------------------------------------------------------+
> +
> +MISC_ROM_PASSOVER_GET
> +~~~~~~~~~~~~~~~~~~~~~
> +
> +ROM passover data is information exported by ROM and could be used by others.
> +It includes boot device, instance, type, mode and etc. This function is used
> +to obtain the ROM passover data. The returned block of words is structured as
> +defined in the ROM passover section in the SoC RM.
> +
> +message_id: 0x7
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the data was got successfully.                 |
> +|                  |NOT_SUPPORTED: if the data is not available.               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 num        |Size of the passover data in words, max 13                 |
> ++------------------+-----------------------------------------------------------+
> +|uint32_t          |                                                           |
> +|data[0:num-1]     |Passover data array                                        |
> ++------------------+-----------------------------------------------------------+
> +

   data[0, num - 1] ...  consistency

Thanks,
Cristian