回复: 回复: [PATCH v5 08/14] staging: media: starfive: Add for StarFive ISP 3A SC

From: Changhuang Liang
Date: Fri Jul 12 2024 - 04:52:56 EST

Next message: Lai Jiangshan: "Re: Regression on linux-next (next-20240709)"
Previous message: Muhammad Usama Anjum: "[PATCH v2 4/4] selftests: x86: entry_from_vm86: remove manual counting and increase maintainability"
In reply to: Jacopo Mondi: "Re: 回复: [PATCH v5 08/14] staging: media: starfive: Add for StarFive ISP 3A SC"
Next in thread: Jacopo Mondi: "Re: 回复: 回复: [PATCH v5 08/14] staging: media: starfive: Add for StarFive ISP 3A SC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi, Jacopo

[...]
> > > > +
> > > > +void stf_set_scd_addr(struct stfcamss *stfcamss,
> > > > + dma_addr_t yhist_addr, dma_addr_t scd_addr,
> > > > + enum stf_isp_type_scd type_scd) {
> > > > + stf_isp_reg_set_bit(stfcamss, ISP_REG_SC_CFG_1, ISP_SC_SEL_MASK,
> > > > + SEL_TYPE(type_scd));
> > > > + stf_isp_reg_write(stfcamss, ISP_REG_SCD_CFG_0, scd_addr);
> > > > + stf_isp_reg_write(stfcamss, ISP_REG_YHIST_CFG_4, yhist_addr); }
> > > > +
> > > > +static void stf_isp_fill_yhist(struct stfcamss *stfcamss, void
> > > > +*vaddr) {
> > > > + struct jh7110_isp_sc_buffer *sc = (struct jh7110_isp_sc_buffer
> *)vaddr;
> > > > + u32 reg_addr = ISP_REG_YHIST_ACC_0;
> > > > + u32 i;
> > > > +
> > > > + for (i = 0; i < 64; i++, reg_addr += 4)
> > > > + sc->y_histogram[i] = stf_isp_reg_read(stfcamss, reg_addr);
> > >
> > > If you have a contigous memory space to read, could memcpy_fromio()
> > > help instead of going through 64 reads ?
> > >
> >
> > I will try this function.
> >
> > > > +}
> > > > +
> > > > +static void stf_isp_fill_flag(struct stfcamss *stfcamss, void *vaddr,
> > > > + enum stf_isp_type_scd *type_scd) {
> > > > + struct jh7110_isp_sc_buffer *sc = (struct jh7110_isp_sc_buffer
> > > > +*)vaddr;
> > > > +
> > > > + *type_scd = stf_isp_get_scd_type(stfcamss);
> > > > + if (*type_scd == TYPE_AWB) {
> > > > + sc->flag = JH7110_ISP_SC_FLAG_AWB;
> > > > + *type_scd = TYPE_OECF;
> > > > + } else {
> > > > + sc->flag = JH7110_ISP_SC_FLAG_AE_AF;
> > > > + *type_scd = TYPE_AWB;
> > >
> > > Is this correct ? Why are you overwriting the value read from HW
> > > that indicates AE/AF stats with AWB ones ?
> >
> > The AWB frame and AE/AF frames will alternate, so the current frame
> > indicates the AE/AF, then set AWB type just for next AWB frame.
> >
>
> Ah! Shouldn't it be userspace configuring which type of statistics it wants to
> receive instead of the driver alternating the two ?
>

No, this is determined by hardware, cannot be configured by userspace.

> > >
> > > > + }
> > > > +}
> > > > +
> > > > irqreturn_t stf_line_irq_handler(int irq, void *priv) {
> > > > struct stfcamss *stfcamss = priv;
> > > > struct stf_capture *cap = &stfcamss->captures[STF_CAPTURE_YUV];
> > > > + struct stf_capture *cap_scd =
> > > > +&stfcamss->captures[STF_CAPTURE_SCD];
> > > > struct stfcamss_buffer *change_buf;
> > > > + enum stf_isp_type_scd type_scd;
> > > > + u32 value;
> > > > u32 status;
> > > >
> > > > status = stf_isp_reg_read(stfcamss, ISP_REG_ISP_CTRL_0); @@
> > > > -467,6
> > > > +513,17 @@ irqreturn_t stf_line_irq_handler(int irq, void *priv)
> > > > stf_set_yuv_addr(stfcamss, change_buf->addr[0],
> > > > change_buf->addr[1]);
> > > > }
> > > > +
> > > > + value = stf_isp_reg_read(stfcamss,
> > > ISP_REG_CSI_MODULE_CFG);
> > > > + if (value & CSI_SC_EN) {
> > > > + change_buf = stf_change_buffer(&cap_scd->buffers);
> > > > + if (change_buf) {
> > > > + stf_isp_fill_flag(stfcamss, change_buf->vaddr,
> > > > + &type_scd);
> > > > + stf_set_scd_addr(stfcamss, change_buf->addr[0],
> > > > + change_buf->addr[1], type_scd);
> > >
> > > Sorry if I'm un-familiar with the HW but this seems to be the line-interrupt.
> > > Are you swapping buffers every line or it's just that you have a
> > > single line irq for the stats ?
> > >
> >
> > Every frame triggers a line-interrupt, and we will swap buffers in it.
> >
>
> ah, frames completion triggers a line-interrupt ?
>

Every frame will trigger line-interrupt and stf_isp_irq_handler.
We use line-interrupt changing buffer, the stf_isp_irq_handler will indicate that
image transfer to DDR is complete.

> > > > + }
> > > > + }
> > > > }
> > > >
> > > > stf_isp_reg_set_bit(stfcamss, ISP_REG_CSIINTS, @@ -485,6
> +542,7
> > > @@
> > > > irqreturn_t stf_isp_irq_handler(int irq, void *priv) {
> > > > struct stfcamss *stfcamss = priv;
> > > > struct stf_capture *cap = &stfcamss->captures[STF_CAPTURE_YUV];
> > > > + struct stf_capture *cap_scd =
> > > > +&stfcamss->captures[STF_CAPTURE_SCD];
> > > > struct stfcamss_buffer *ready_buf;
> > > > u32 status;
> > > >
> > > > @@ -496,6 +554,14 @@ irqreturn_t stf_isp_irq_handler(int irq, void *priv)
> > > > vb2_buffer_done(&ready_buf->vb.vb2_buf,
> > > VB2_BUF_STATE_DONE);
> > > > }
> > > >
> > > > + if (status & ISPC_SC) {
> > > > + ready_buf = stf_buf_done(&cap_scd->buffers);
> > > > + if (ready_buf) {
> > > > + stf_isp_fill_yhist(stfcamss, ready_buf->vaddr);
> > > > + vb2_buffer_done(&ready_buf->vb.vb2_buf,
> > > VB2_BUF_STATE_DONE);
> > > > + }
> > > > + }
> > > > +
> > > > stf_isp_reg_write(stfcamss, ISP_REG_ISP_CTRL_0,
> > > > (status & ~ISPC_INT_ALL_MASK) |
> > > > ISPC_ISP | ISPC_CSI | ISPC_SC); diff --git
> > > > a/drivers/staging/media/starfive/camss/stf-isp.h
> > > > b/drivers/staging/media/starfive/camss/stf-isp.h
> > > > index fcda0502e3b0..0af7b367e57a 100644
> > > > --- a/drivers/staging/media/starfive/camss/stf-isp.h
> > > > +++ b/drivers/staging/media/starfive/camss/stf-isp.h
> > > > @@ -10,6 +10,7 @@
> > > > #ifndef STF_ISP_H
> > > > #define STF_ISP_H
> > > >
> > > > +#include <linux/jh7110-isp.h>
> > > > #include <media/v4l2-subdev.h>
> > > >
> > > > #include "stf-video.h"
> > > > @@ -107,6 +108,12 @@
> > > > #define Y_COOR(y) ((y) << 16)
> > > > #define X_COOR(x) ((x) << 0)
> > > >
> > > > +#define ISP_REG_SCD_CFG_0 0x098
> > > > +
> > > > +#define ISP_REG_SC_CFG_1 0x0bc
> > > > +#define ISP_SC_SEL_MASK GENMASK(31, 30)
> > > > +#define SEL_TYPE(n) ((n) << 30)
> > > > +
> > > > #define ISP_REG_LCCF_CFG_2 0x0e0
> > > > #define ISP_REG_LCCF_CFG_3 0x0e4
> > > > #define ISP_REG_LCCF_CFG_4 0x0e8
> > > > @@ -305,6 +312,10 @@
> > > > #define DNRM_F(n) ((n) << 16)
> > > > #define CCM_M_DAT(n) ((n) << 0)
> > > >
> > > > +#define ISP_REG_YHIST_CFG_4 0xcd8
> > > > +
> > > > +#define ISP_REG_YHIST_ACC_0 0xd00
> > > > +
> > > > #define ISP_REG_GAMMA_VAL0 0xe00
> > > > #define ISP_REG_GAMMA_VAL1 0xe04
> > > > #define ISP_REG_GAMMA_VAL2 0xe08
> > > > @@ -389,6 +400,15 @@
> > > > #define IMAGE_MAX_WIDTH 1920
> > > > #define IMAGE_MAX_HEIGH 1080
> > > >
> > > > +#define ISP_YHIST_BUFFER_SIZE (64 * sizeof(__u32))
> > >
> > > Should this be in the uAPI header as it is useful to userspace as well ?
> > >
> > > you could:
> > >
> > > struct jh7110_isp_sc_buffer {
> > > __u8 y_histogram[ISP_YHIST_BUFFER_SIZE];
> > > __u32 reserv0[33];
> > > __u32 bright_sc[4096];
> > > __u32 reserv1[96];
> > > __u32 ae_hist_y[128];
> > > __u32 reserv2[511];
> > > __u16 flag;
> > > };
> > >
> > > ofc if the size is made part of the uAPI you need a more proper name
> > > such as JH7110_ISP_YHIST_SIZE
> > >
> >
> > OK, I will try this.
> >
> > > > +
> > > > +enum stf_isp_type_scd {
> > > > + TYPE_DEC = 0,
> > > > + TYPE_OBC,
> > > > + TYPE_OECF,
> > > > + TYPE_AWB,
> > > > +};
> > > > +
> > > > /* pad id for media framework */
> > > > enum stf_isp_pad_id {
> > > > STF_ISP_PAD_SINK = 0,
> > > > @@ -429,5 +449,8 @@ int stf_isp_unregister(struct stf_isp_dev
> > > > *isp_dev);
> > > >
> > > > void stf_set_yuv_addr(struct stfcamss *stfcamss,
> > > > dma_addr_t y_addr, dma_addr_t uv_addr);
> > > > +void stf_set_scd_addr(struct stfcamss *stfcamss,
> > > > + dma_addr_t yhist_addr, dma_addr_t scd_addr,
> > > > + enum stf_isp_type_scd type_scd);
> > > >
> > > > #endif /* STF_ISP_H */
> > > > diff --git a/drivers/staging/media/starfive/camss/stf-video.c
> > > > b/drivers/staging/media/starfive/camss/stf-video.c
> > > > index 989b5e82bae9..2203605ec9c7 100644
> > > > --- a/drivers/staging/media/starfive/camss/stf-video.c
> > > > +++ b/drivers/staging/media/starfive/camss/stf-video.c
> > > > @@ -125,6 +125,14 @@ static int stf_video_init_format(struct
> > > stfcamss_video *video)
> > > > return 0;
> > > > }
> > > >
> > > > +static int stf_video_scd_init_format(struct stfcamss_video
> > > > +*video)
> > >
> > > Make it void if it can't fail (see below)
> > >
> >
> > OK.
> >
> > > > +{
> > > > + video->active_fmt.fmt.meta.dataformat =
> > > video->formats[0].pixelformat;
> > > > + video->active_fmt.fmt.meta.buffersize = sizeof(struct
> > > > +jh7110_isp_sc_buffer);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > /* -----------------------------------------------------------------------------
> > > > * Video queue operations
> > > > */
> > > > @@ -330,6 +338,78 @@ static const struct vb2_ops
> > > > stf_video_vb2_q_ops =
> > > {
> > > > .stop_streaming = video_stop_streaming, };
> > > >
> > > > +static int video_scd_queue_setup(struct vb2_queue *q,
> > > > + unsigned int *num_buffers,
> > > > + unsigned int *num_planes,
> > > > + unsigned int sizes[],
> > > > + struct device *alloc_devs[]) {
> > > > + if (*num_planes)
> > > > + return sizes[0] < sizeof(struct jh7110_isp_sc_buffer) ? -EINVAL :
> > > > +0;
> > > > +
> > > > + *num_planes = 1;
> > > > + sizes[0] = sizeof(struct jh7110_isp_sc_buffer);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int video_scd_buf_init(struct vb2_buffer *vb) {
> > > > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > > > + struct stfcamss_buffer *buffer = to_stfcamss_buffer(vbuf);
> > > > + dma_addr_t *paddr;
> > > > +
> > > > + paddr = vb2_plane_cookie(vb, 0);
> > > > + buffer->addr[0] = *paddr;
> > > > + buffer->addr[1] = buffer->addr[0] + ISP_YHIST_BUFFER_SIZE;
> > >
> > > Interesting, I don't see many users of vb2_plane_cookie() in
> > > mainline and I'm not sure what this gives you as you use it to program the
> following registers:
> > >
> > > stf_isp_reg_write(stfcamss, ISP_REG_SCD_CFG_0, scd_addr);
> > > stf_isp_reg_write(stfcamss, ISP_REG_YHIST_CFG_4, yhist_addr);
> > >
> >
> > We set the value for ISP hardware, then ISP will transfer the statistics to the
> buffer.
> > when the stf_isp_irq_handler interrupt is triggered, indicates that
> > the buffer fill is complete.
> >
>
> So I take this as
>
> paddr = vb2_plane_cookie(vb, 0);
> buffer->addr[0] = *paddr;
> buffer->addr[1] = buffer->addr[0] + ISP_YHIST_BUFFER_SIZE;
>
> stf_set_scd_addr(stfcamss, change_buf->addr[0],
> change_buf->addr[1], type_scd);
>
> Makes the ISP transfer data directly to the memory areas in addr[0] and addr[1]
> (which explains why struct jh7110_isp_sc_buffer is packed, as it has to match
> the HW registers layout)
>
> If this is the case, why are you then manually copying the histograms and the
> flags to vaddr ?
>

Yes, your are right.
But actually there is a problem with our ISP RTL.
We set this yhist_addr to ISP, but it actually not work.
stf_isp_reg_write(stfcamss, ISP_REG_YHIST_CFG_4, yhist_addr);
or I will drop this line in next version.

So, in this structure
struct jh7110_isp_sc_buffer {
__u32 y_histogram[64];
__u32 reserv0[33];
__u32 bright_sc[4096];
__u32 reserv1[96];
__u32 ae_hist_y[128];
__u32 reserv2[511];
__u16 flag;
};

Only

__u32 reserv0[33];
__u32 bright_sc[4096];
__u32 reserv1[96];
__u32 ae_hist_y[128];
__u32 reserv2[511];

transfer by ISP hardware.

I need to fill
__u32 y_histogram[64];
__u16 flag;

by vaddr.

Regards,
Changhuang

> ready_buf = stf_buf_done(&cap_scd->buffers);
> if (ready_buf) {
> stf_isp_fill_yhist(stfcamss, ready_buf->vaddr);
> vb2_buffer_done(&ready_buf->vb.vb2_buf,
> VB2_BUF_STATE_DONE);
> }
>
> change_buf = stf_change_buffer(&cap_scd->buffers);
> if (change_buf) {
> stf_isp_fill_flag(stfcamss, change_buf->vaddr,
> &type_scd);
>
> If I read vb2_dc_alloc_coherent() right 'cookie' == 'vaddr'
>
> static int vb2_dc_alloc_coherent(struct vb2_dc_buf *buf) {
> struct vb2_queue *q = buf->vb->vb2_queue;
>
> buf->cookie = dma_alloc_attrs(buf->dev,
> buf->size,
> &buf->dma_addr,
> GFP_KERNEL | q->gfp_flags,
> buf->attrs);
> if (!buf->cookie)
> return -ENOMEM;
>
> if (q->dma_attrs & DMA_ATTR_NO_KERNEL_MAPPING)
> return 0;
>
> buf->vaddr = buf->cookie;
> return 0;
> }
>
> Could you verify what you get by printing out 'paddr' and 'vaddr' in
> video_scd_buf_init() ?
>
>
> > >
> > > > + buffer->vaddr = vb2_plane_vaddr(vb, 0);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int video_scd_buf_prepare(struct vb2_buffer *vb) {
> > > > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > > > +
> > > > + if (sizeof(struct jh7110_isp_sc_buffer) > vb2_plane_size(vb, 0))
> > > > + return -EINVAL;
> > > > +
> > > > + vb2_set_plane_payload(vb, 0, sizeof(struct
> > > > +jh7110_isp_sc_buffer));
> > > > +
> > > > + vbuf->field = V4L2_FIELD_NONE;
> > >
> > > is this necessary ?
> > >
> >
> > Will drop it.
> >
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int video_scd_start_streaming(struct vb2_queue *q,
> > > > +unsigned int count) {
> > > > + struct stfcamss_video *video = vb2_get_drv_priv(q);
> > > > +
> > > > + video->ops->start_streaming(video);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static void video_scd_stop_streaming(struct vb2_queue *q) {
> > > > + struct stfcamss_video *video = vb2_get_drv_priv(q);
> > > > +
> > > > + video->ops->stop_streaming(video);
> > > > +
> > > > + video->ops->flush_buffers(video, VB2_BUF_STATE_ERROR); }
> > > > +
> > > > +static const struct vb2_ops stf_video_scd_vb2_q_ops = {
> > > > + .queue_setup = video_scd_queue_setup,
> > > > + .wait_prepare = vb2_ops_wait_prepare,
> > > > + .wait_finish = vb2_ops_wait_finish,
> > > > + .buf_init = video_scd_buf_init,
> > > > + .buf_prepare = video_scd_buf_prepare,
> > > > + .buf_queue = video_buf_queue,
> > > > + .start_streaming = video_scd_start_streaming,
> > > > + .stop_streaming = video_scd_stop_streaming, };
> > > > +
> > > > /* -----------------------------------------------------------------------------
> > > > * V4L2 ioctls
> > > > */
> > > > @@ -448,6 +528,37 @@ static const struct v4l2_ioctl_ops
> > > > stf_vid_ioctl_ops
> > > = {
> > > > .vidioc_streamoff = vb2_ioctl_streamoff,
> > > > };
> > > >
> > > > +static int video_scd_g_fmt(struct file *file, void *fh, struct
> > > > +v4l2_format *f) {
> > > > + struct stfcamss_video *video = video_drvdata(file);
> > > > + struct v4l2_meta_format *meta = &f->fmt.meta;
> > > > +
> > > > + if (f->type != video->type)
> > > > + return -EINVAL;
> > > > +
> > > > + meta->dataformat = video->active_fmt.fmt.meta.dataformat;
> > > > + meta->buffersize = video->active_fmt.fmt.meta.buffersize;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static const struct v4l2_ioctl_ops stf_vid_scd_ioctl_ops = {
> > > > + .vidioc_querycap = video_querycap,
> > > > + .vidioc_enum_fmt_meta_cap = video_enum_fmt,
> > > > + .vidioc_g_fmt_meta_cap = video_scd_g_fmt,
> > > > + .vidioc_s_fmt_meta_cap = video_scd_g_fmt,
> > > > + .vidioc_try_fmt_meta_cap = video_scd_g_fmt,
> > > > + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> > > > + .vidioc_querybuf = vb2_ioctl_querybuf,
> > > > + .vidioc_qbuf = vb2_ioctl_qbuf,
> > > > + .vidioc_expbuf = vb2_ioctl_expbuf,
> > > > + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> > > > + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> > > > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> > > > + .vidioc_streamon = vb2_ioctl_streamon,
> > > > + .vidioc_streamoff = vb2_ioctl_streamoff,
> > > > +};
> > > > +
> > > > /* -----------------------------------------------------------------------------
> > > > * V4L2 file operations
> > > > */
> > > > @@ -473,6 +584,9 @@ static int stf_link_validate(struct media_link *link)
> > > > struct stfcamss_video *video = video_get_drvdata(vdev);
> > > > int ret;
> > > >
> > > > + if (video->type == V4L2_BUF_TYPE_META_CAPTURE)
> > > > + return 0;
> > > > +
> > > > ret = stf_video_check_format(video);
> > > >
> > > > return ret;
> > > > @@ -506,7 +620,11 @@ int stf_video_register(struct stfcamss_video
> > > *video,
> > > > q = &video->vb2_q;
> > > > q->drv_priv = video;
> > > > q->mem_ops = &vb2_dma_contig_memops;
> > > > - q->ops = &stf_video_vb2_q_ops;
> > > > +
> > > > + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
> > > > + q->ops = &stf_video_vb2_q_ops;
> > > > + else
> > > > + q->ops = &stf_video_scd_vb2_q_ops;
> > > > q->type = video->type;
> > > > q->io_modes = VB2_DMABUF | VB2_MMAP;
> > > > q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> > > > @@ -529,16 +647,28 @@ int stf_video_register(struct stfcamss_video
> > > *video,
> > > > goto err_mutex_destroy;
> > > > }
> > > >
> > > > - ret = stf_video_init_format(video);
> > > > - if (ret < 0) {
> > > > - dev_err(video->stfcamss->dev,
> > > > - "Failed to init format: %d\n", ret);
> > > > - goto err_media_cleanup;
> > > > + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
> > > > + ret = stf_video_init_format(video);
> > >
> > > I don't think this can fail
> > >
> >
> > This already exists, and I probably will not change it here.
> >
>
> No problem! Maybe something for later when de-staging the driver.
>
> Thanks
> j
> > >

Next message: Lai Jiangshan: "Re: Regression on linux-next (next-20240709)"
Previous message: Muhammad Usama Anjum: "[PATCH v2 4/4] selftests: x86: entry_from_vm86: remove manual counting and increase maintainability"
In reply to: Jacopo Mondi: "Re: 回复: [PATCH v5 08/14] staging: media: starfive: Add for StarFive ISP 3A SC"
Next in thread: Jacopo Mondi: "Re: 回复: 回复: [PATCH v5 08/14] staging: media: starfive: Add for StarFive ISP 3A SC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]