Re: [PATCH v5 00/10] mips: Support for RTL9302C

[Thomas Bogendoerfer]

On Wed, Jul 10, 2024 at 04:35:14PM +1200, Chris Packham wrote:
> This series adds basic support for the RTL9302C reference board. Currently the
> focus is on the CPU block stuff. I hope to get around to the DSA switch driver
> eventually but this is a small start that lets me boot a mainline kernel on the
> board I have. I initialiy started with code from openwrt but have paired it
> down to just the clocksource driver and devicetree.
> 
> The first two patches in this series are fixing some complaints from make
> dtbs_check for some existing realtek dts files. They can be applied on their
> own if desired.
> 
> Chris Packham (10):
>   mips: dts: realtek: use "serial" instead of "uart" in node name
>   mips: dts: realtek: add device_type property to cpu node
>   dt-bindings: vendor-prefixes: Add Cameo Communications
>   dt-bindings: mips: realtek: Add rtl930x-soc compatible
>   dt-bindings: timer: Add schema for realtek,otto-timer
>   dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc
>   clocksource: realtek: Add timer driver for rtl-otto platforms
>   mips: select REALTEK_OTTO_TIMER for Realtek platforms
>   mips: generic: add fdt fixup for Realtek reference board
>   mips: dts: realtek: Add RTL9302C board
> 
>  .../realtek,rtl-intc.yaml                     |  20 +-
>  .../devicetree/bindings/mips/realtek-rtl.yaml |   4 +
>  .../bindings/timer/realtek,otto-timer.yaml    |  63 ++++
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  arch/mips/Kconfig                             |   1 +
>  arch/mips/boot/dts/realtek/Makefile           |   1 +
>  .../cameo-rtl9302c-2x-rtl8224-2xge.dts        |  73 +++++
>  arch/mips/boot/dts/realtek/rtl838x.dtsi       |   1 +
>  arch/mips/boot/dts/realtek/rtl83xx.dtsi       |   4 +-
>  arch/mips/boot/dts/realtek/rtl930x.dtsi       |  79 +++++
>  arch/mips/generic/Makefile                    |   1 +
>  arch/mips/generic/board-realtek.c             |  79 +++++
>  drivers/clocksource/Kconfig                   |  10 +
>  drivers/clocksource/Makefile                  |   1 +
>  drivers/clocksource/timer-rtl-otto.c          | 291 ++++++++++++++++++
>  include/linux/cpuhotplug.h                    |   1 +
>  16 files changed, 628 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml
>  create mode 100644 arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
>  create mode 100644 arch/mips/boot/dts/realtek/rtl930x.dtsi
>  create mode 100644 arch/mips/generic/board-realtek.c
>  create mode 100644 drivers/clocksource/timer-rtl-otto.c

applied patch 1-4, 6 and 8-10 to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]