回复: 回复: 回复: [PATCH v5 08/14] staging: media: starfive: Add for StarFive ISP 3A SC

From: Changhuang Liang
Date: Fri Jul 12 2024 - 09:00:38 EST


Hi, Jacopo

>
> Hi Changhuang
>
> On Fri, Jul 12, 2024 at 08:36:21AM GMT, Changhuang Liang wrote:
> > Hi, Jacopo
> >
> > [...]
> > > > > > +
> > > > > > +void stf_set_scd_addr(struct stfcamss *stfcamss,
> > > > > > + dma_addr_t yhist_addr, dma_addr_t scd_addr,
> > > > > > + enum stf_isp_type_scd type_scd) {
> > > > > > + stf_isp_reg_set_bit(stfcamss, ISP_REG_SC_CFG_1,
> ISP_SC_SEL_MASK,
> > > > > > + SEL_TYPE(type_scd));
> > > > > > + stf_isp_reg_write(stfcamss, ISP_REG_SCD_CFG_0, scd_addr);
> > > > > > + stf_isp_reg_write(stfcamss, ISP_REG_YHIST_CFG_4,
> > > > > > +yhist_addr); }
> > > > > > +
> > > > > > +static void stf_isp_fill_yhist(struct stfcamss *stfcamss,
> > > > > > +void
> > > > > > +*vaddr) {
> > > > > > + struct jh7110_isp_sc_buffer *sc = (struct
> > > > > > +jh7110_isp_sc_buffer
> > > *)vaddr;
> > > > > > + u32 reg_addr = ISP_REG_YHIST_ACC_0;
> > > > > > + u32 i;
> > > > > > +
> > > > > > + for (i = 0; i < 64; i++, reg_addr += 4)
> > > > > > + sc->y_histogram[i] = stf_isp_reg_read(stfcamss,
> reg_addr);
> > > > >
> > > > > If you have a contigous memory space to read, could
> > > > > memcpy_fromio() help instead of going through 64 reads ?
> > > > >
> > > >
> > > > I will try this function.
> > > >
> > > > > > +}
> > > > > > +
> > > > > > +static void stf_isp_fill_flag(struct stfcamss *stfcamss, void *vaddr,
> > > > > > + enum stf_isp_type_scd *type_scd) {
> > > > > > + struct jh7110_isp_sc_buffer *sc = (struct
> > > > > > +jh7110_isp_sc_buffer *)vaddr;
> > > > > > +
> > > > > > + *type_scd = stf_isp_get_scd_type(stfcamss);
> > > > > > + if (*type_scd == TYPE_AWB) {
> > > > > > + sc->flag = JH7110_ISP_SC_FLAG_AWB;
> > > > > > + *type_scd = TYPE_OECF;
> > > > > > + } else {
> > > > > > + sc->flag = JH7110_ISP_SC_FLAG_AE_AF;
> > > > > > + *type_scd = TYPE_AWB;
> > > > >
> > > > > Is this correct ? Why are you overwriting the value read from HW
> > > > > that indicates AE/AF stats with AWB ones ?
> > > >
> > > > The AWB frame and AE/AF frames will alternate, so the current
> > > > frame indicates the AE/AF, then set AWB type just for next AWB frame.
> > > >
> > >
> > > Ah! Shouldn't it be userspace configuring which type of statistics
> > > it wants to receive instead of the driver alternating the two ?
> > >
> >
> > No, this is determined by hardware, cannot be configured by userspace.
> >
>
>
> So this
> stf_isp_reg_set_bit(stfcamss, ISP_REG_SC_CFG_1, ISP_SC_SEL_MASK,
> SEL_TYPE(type_scd));
>
> doesn't actually select which stats type you get from the HW
>

You can understand it that way. But it still needs to be written to work with the hardware.

> > > > >
> > > > > > + }
> > > > > > +}
> > > > > > +
> > > > > > irqreturn_t stf_line_irq_handler(int irq, void *priv) {
> > > > > > struct stfcamss *stfcamss = priv;
> > > > > > struct stf_capture *cap =
> > > > > > &stfcamss->captures[STF_CAPTURE_YUV];
> > > > > > + struct stf_capture *cap_scd =
> > > > > > +&stfcamss->captures[STF_CAPTURE_SCD];
> > > > > > struct stfcamss_buffer *change_buf;
> > > > > > + enum stf_isp_type_scd type_scd;
> > > > > > + u32 value;
> > > > > > u32 status;
> > > > > >
> > > > > > status = stf_isp_reg_read(stfcamss, ISP_REG_ISP_CTRL_0);
> @@
> > > > > > -467,6
> > > > > > +513,17 @@ irqreturn_t stf_line_irq_handler(int irq, void
> > > > > > +*priv)
> > > > > > stf_set_yuv_addr(stfcamss,
> change_buf->addr[0],
> > > > > > change_buf->addr[1]);
> > > > > > }
> > > > > > +
> > > > > > + value = stf_isp_reg_read(stfcamss,
> > > > > ISP_REG_CSI_MODULE_CFG);
> > > > > > + if (value & CSI_SC_EN) {
> > > > > > + change_buf =
> stf_change_buffer(&cap_scd->buffers);
> > > > > > + if (change_buf) {
> > > > > > + stf_isp_fill_flag(stfcamss,
> change_buf->vaddr,
> > > > > > + &type_scd);
> > > > > > + stf_set_scd_addr(stfcamss,
> change_buf->addr[0],
> > > > > > + change_buf->addr[1], type_scd);
> > > > >
> > > > > Sorry if I'm un-familiar with the HW but this seems to be the
> line-interrupt.
> > > > > Are you swapping buffers every line or it's just that you have a
> > > > > single line irq for the stats ?
> > > > >
> > > >
> > > > Every frame triggers a line-interrupt, and we will swap buffers in it.
> > > >
> > >
> > > ah, frames completion triggers a line-interrupt ?
> > >
> >
> > Every frame will trigger line-interrupt and stf_isp_irq_handler.
> > We use line-interrupt changing buffer, the stf_isp_irq_handler will
> > indicate that image transfer to DDR is complete.
> >
> >
> > > > > > + }
> > > > > > + }
> > > > > > }
> > > > > >
> > > > > > stf_isp_reg_set_bit(stfcamss, ISP_REG_CSIINTS, @@
> -485,6
> > > +542,7
> > > > > @@
> > > > > > irqreturn_t stf_isp_irq_handler(int irq, void *priv) {
> > > > > > struct stfcamss *stfcamss = priv;
> > > > > > struct stf_capture *cap =
> > > > > > &stfcamss->captures[STF_CAPTURE_YUV];
> > > > > > + struct stf_capture *cap_scd =
> > > > > > +&stfcamss->captures[STF_CAPTURE_SCD];
> > > > > > struct stfcamss_buffer *ready_buf;
> > > > > > u32 status;
> > > > > >
> > > > > > @@ -496,6 +554,14 @@ irqreturn_t stf_isp_irq_handler(int irq, void
> *priv)
> > > > > > vb2_buffer_done(&ready_buf->vb.vb2_buf,
> > > > > VB2_BUF_STATE_DONE);
> > > > > > }
> > > > > >
> > > > > > + if (status & ISPC_SC) {
> > > > > > + ready_buf = stf_buf_done(&cap_scd->buffers);
> > > > > > + if (ready_buf) {
> > > > > > + stf_isp_fill_yhist(stfcamss, ready_buf->vaddr);
> > > > > > + vb2_buffer_done(&ready_buf->vb.vb2_buf,
> > > > > VB2_BUF_STATE_DONE);
> > > > > > + }
> > > > > > + }
> > > > > > +
> > > > > > stf_isp_reg_write(stfcamss, ISP_REG_ISP_CTRL_0,
> > > > > > (status & ~ISPC_INT_ALL_MASK) |
> > > > > > ISPC_ISP | ISPC_CSI | ISPC_SC); diff --git
> > > > > > a/drivers/staging/media/starfive/camss/stf-isp.h
> > > > > > b/drivers/staging/media/starfive/camss/stf-isp.h
> > > > > > index fcda0502e3b0..0af7b367e57a 100644
> > > > > > --- a/drivers/staging/media/starfive/camss/stf-isp.h
> > > > > > +++ b/drivers/staging/media/starfive/camss/stf-isp.h
> > > > > > @@ -10,6 +10,7 @@
> > > > > > #ifndef STF_ISP_H
> > > > > > #define STF_ISP_H
> > > > > >
> > > > > > +#include <linux/jh7110-isp.h>
> > > > > > #include <media/v4l2-subdev.h>
> > > > > >
> > > > > > #include "stf-video.h"
> > > > > > @@ -107,6 +108,12 @@
> > > > > > #define Y_COOR(y) ((y) << 16)
> > > > > > #define X_COOR(x) ((x) << 0)
> > > > > >
> > > > > > +#define ISP_REG_SCD_CFG_0 0x098
> > > > > > +
> > > > > > +#define ISP_REG_SC_CFG_1 0x0bc
> > > > > > +#define ISP_SC_SEL_MASK GENMASK(31, 30)
> > > > > > +#define SEL_TYPE(n) ((n) << 30)
> > > > > > +
> > > > > > #define ISP_REG_LCCF_CFG_2 0x0e0
> > > > > > #define ISP_REG_LCCF_CFG_3 0x0e4
> > > > > > #define ISP_REG_LCCF_CFG_4 0x0e8
> > > > > > @@ -305,6 +312,10 @@
> > > > > > #define DNRM_F(n) ((n) << 16)
> > > > > > #define CCM_M_DAT(n) ((n) << 0)
> > > > > >
> > > > > > +#define ISP_REG_YHIST_CFG_4 0xcd8
> > > > > > +
> > > > > > +#define ISP_REG_YHIST_ACC_0 0xd00
> > > > > > +
> > > > > > #define ISP_REG_GAMMA_VAL0 0xe00
> > > > > > #define ISP_REG_GAMMA_VAL1 0xe04
> > > > > > #define ISP_REG_GAMMA_VAL2 0xe08
> > > > > > @@ -389,6 +400,15 @@
> > > > > > #define IMAGE_MAX_WIDTH 1920
> > > > > > #define IMAGE_MAX_HEIGH 1080
> > > > > >
> > > > > > +#define ISP_YHIST_BUFFER_SIZE (64 * sizeof(__u32))
> > > > >
> > > > > Should this be in the uAPI header as it is useful to userspace as well ?
> > > > >
> > > > > you could:
> > > > >
> > > > > struct jh7110_isp_sc_buffer {
> > > > > __u8 y_histogram[ISP_YHIST_BUFFER_SIZE];
> > > > > __u32 reserv0[33];
> > > > > __u32 bright_sc[4096];
> > > > > __u32 reserv1[96];
> > > > > __u32 ae_hist_y[128];
> > > > > __u32 reserv2[511];
> > > > > __u16 flag;
> > > > > };
> > > > >
> > > > > ofc if the size is made part of the uAPI you need a more proper
> > > > > name such as JH7110_ISP_YHIST_SIZE
> > > > >
> > > >
> > > > OK, I will try this.
> > > >
> > > > > > +
> > > > > > +enum stf_isp_type_scd {
> > > > > > + TYPE_DEC = 0,
> > > > > > + TYPE_OBC,
> > > > > > + TYPE_OECF,
> > > > > > + TYPE_AWB,
> > > > > > +};
> > > > > > +
> > > > > > /* pad id for media framework */ enum stf_isp_pad_id {
> > > > > > STF_ISP_PAD_SINK = 0,
> > > > > > @@ -429,5 +449,8 @@ int stf_isp_unregister(struct stf_isp_dev
> > > > > > *isp_dev);
> > > > > >
> > > > > > void stf_set_yuv_addr(struct stfcamss *stfcamss,
> > > > > > dma_addr_t y_addr, dma_addr_t uv_addr);
> > > > > > +void stf_set_scd_addr(struct stfcamss *stfcamss,
> > > > > > + dma_addr_t yhist_addr, dma_addr_t scd_addr,
> > > > > > + enum stf_isp_type_scd type_scd);
> > > > > >
> > > > > > #endif /* STF_ISP_H */
> > > > > > diff --git a/drivers/staging/media/starfive/camss/stf-video.c
> > > > > > b/drivers/staging/media/starfive/camss/stf-video.c
> > > > > > index 989b5e82bae9..2203605ec9c7 100644
> > > > > > --- a/drivers/staging/media/starfive/camss/stf-video.c
> > > > > > +++ b/drivers/staging/media/starfive/camss/stf-video.c
> > > > > > @@ -125,6 +125,14 @@ static int stf_video_init_format(struct
> > > > > stfcamss_video *video)
> > > > > > return 0;
> > > > > > }
> > > > > >
> > > > > > +static int stf_video_scd_init_format(struct stfcamss_video
> > > > > > +*video)
> > > > >
> > > > > Make it void if it can't fail (see below)
> > > > >
> > > >
> > > > OK.
> > > >
> > > > > > +{
> > > > > > + video->active_fmt.fmt.meta.dataformat =
> > > > > video->formats[0].pixelformat;
> > > > > > + video->active_fmt.fmt.meta.buffersize = sizeof(struct
> > > > > > +jh7110_isp_sc_buffer);
> > > > > > +
> > > > > > + return 0;
> > > > > > +}
> > > > > > +
> > > > > > /* -----------------------------------------------------------------------------
> > > > > > * Video queue operations
> > > > > > */
> > > > > > @@ -330,6 +338,78 @@ static const struct vb2_ops
> > > > > > stf_video_vb2_q_ops =
> > > > > {
> > > > > > .stop_streaming = video_stop_streaming, };
> > > > > >
> > > > > > +static int video_scd_queue_setup(struct vb2_queue *q,
> > > > > > + unsigned int *num_buffers,
> > > > > > + unsigned int *num_planes,
> > > > > > + unsigned int sizes[],
> > > > > > + struct device *alloc_devs[]) {
> > > > > > + if (*num_planes)
> > > > > > + return sizes[0] < sizeof(struct jh7110_isp_sc_buffer) ?
> -EINVAL :
> > > > > > +0;
> > > > > > +
> > > > > > + *num_planes = 1;
> > > > > > + sizes[0] = sizeof(struct jh7110_isp_sc_buffer);
> > > > > > +
> > > > > > + return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int video_scd_buf_init(struct vb2_buffer *vb) {
> > > > > > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > > > > > + struct stfcamss_buffer *buffer = to_stfcamss_buffer(vbuf);
> > > > > > + dma_addr_t *paddr;
> > > > > > +
> > > > > > + paddr = vb2_plane_cookie(vb, 0);
> > > > > > + buffer->addr[0] = *paddr;
> > > > > > + buffer->addr[1] = buffer->addr[0] + ISP_YHIST_BUFFER_SIZE;
> > > > >
> > > > > Interesting, I don't see many users of vb2_plane_cookie() in
> > > > > mainline and I'm not sure what this gives you as you use it to
> > > > > program the
> > > following registers:
> > > > >
> > > > > stf_isp_reg_write(stfcamss, ISP_REG_SCD_CFG_0, scd_addr);
> > > > > stf_isp_reg_write(stfcamss, ISP_REG_YHIST_CFG_4, yhist_addr);
> > > > >
> > > >
> > > > We set the value for ISP hardware, then ISP will transfer the
> > > > statistics to the
> > > buffer.
> > > > when the stf_isp_irq_handler interrupt is triggered, indicates
> > > > that the buffer fill is complete.
> > > >
> > >
> > > So I take this as
> > >
> > > paddr = vb2_plane_cookie(vb, 0);
> > > buffer->addr[0] = *paddr;
> > > buffer->addr[1] = buffer->addr[0] + ISP_YHIST_BUFFER_SIZE;
> > >
> > > stf_set_scd_addr(stfcamss, change_buf->addr[0],
> > > change_buf->addr[1], type_scd);
> > >
> > > Makes the ISP transfer data directly to the memory areas in addr[0]
> > > and addr[1] (which explains why struct jh7110_isp_sc_buffer is
> > > packed, as it has to match the HW registers layout)
> > >
> > > If this is the case, why are you then manually copying the
> > > histograms and the flags to vaddr ?
> > >
> >
> > Yes, your are right.
> > But actually there is a problem with our ISP RTL.
> > We set this yhist_addr to ISP, but it actually not work.
> > stf_isp_reg_write(stfcamss, ISP_REG_YHIST_CFG_4, yhist_addr); or I
> > will drop this line in next version.
> >
> > So, in this structure
> > struct jh7110_isp_sc_buffer {
> > __u32 y_histogram[64];
> > __u32 reserv0[33];
> > __u32 bright_sc[4096];
> > __u32 reserv1[96];
> > __u32 ae_hist_y[128];
> > __u32 reserv2[511];
> > __u16 flag;
> > };
> >
> > Only
> >
> > __u32 reserv0[33];
> > __u32 bright_sc[4096];
> > __u32 reserv1[96];
> > __u32 ae_hist_y[128];
> > __u32 reserv2[511];
> >
> > transfer by ISP hardware.
> >
> > I need to fill
> > __u32 y_histogram[64];
> > __u16 flag;
> >
> > by vaddr.
>
> I see.
>
> Apart from the fact you can drop paddr and vb2_plane_cookie() and use vaddr
> for all (if I'm not mistaken), could you please record the above rationale for
> manually filling y_histogram and flag by hand in a comment to avoid future
> readers being confused by this as I was ?
>

Still need to keep the paddr and vb2_plane_cookie() for
__u32 reserv0[33];
__u32 bright_sc[4096];
__u32 reserv1[96];
__u32 ae_hist_y[128];
__u32 reserv2[511];

Because this part is filled by the hardware.

I will add more information for struct jh7110_isp_sc_buffer

Regards,
Changhuang