[PATCH V7 00/18] Add data type profiling support for powerpc
From: Athira Rajeev
Date: Sat Jul 13 2024 - 12:56:39 EST
The patchset from Namhyung added support for data type profiling
in perf tool. This enabled support to associate PMU samples to data
types they refer using DWARF debug information. With the upstream
perf, currently it possible to run perf report or perf annotate to
view the data type information on x86.
Initial patchset posted here had changes need to enable data type
profiling support for powerpc.
https://lore.kernel.org/all/6e09dc28-4a2e-49d8-a2b5-ffb3396a9952@xxxxxxxxxx/T/
Main change were:
1. powerpc instruction nmemonic table to associate load/store
instructions with move_ops which is use to identify if instruction
is a memory access one.
2. To get register number and access offset from the given
instruction, code uses fields from "struct arch" -> objump.
Added entry for powerpc here.
3. A get_arch_regnum to return register number from the
register name string.
But the apporach used in the initial patchset used parsing of
disassembled code which the current perf tool implementation does.
Example: lwz r10,0(r9)
This line "lwz r10,0(r9)" is parsed to extract instruction name,
registers names and offset. Also to find whether there is a memory
reference in the operands, "memory_ref_char" field of objdump is used.
For x86, "(" is used as memory_ref_char to tackle instructions of the
form "mov (%rax), %rcx".
In case of powerpc, not all instructions using "(" are the only memory
instructions. Example, above instruction can also be of extended form (X
form) "lwzx r10,0,r19". Inorder to easy identify the instruction category
and extract the source/target registers, second patchset added support to use
raw instruction. With raw instruction, macros are added to extract opcode
and register fields.
Link to second patchset:
https://lore.kernel.org/all/20240506121906.76639-1-atrajeev@xxxxxxxxxxxxxxxxxx/
Example representation using --show-raw-insn in objdump gives result:
38 01 81 e8 ld r4,312(r1)
Here "38 01 81 e8" is the raw instruction representation. In powerpc,
this translates to instruction form: "ld RT,DS(RA)" and binary code
as:
_____________________________________
| 58 | RT | RA | DS | |
-------------------------------------
0 6 11 16 30 31
Second patchset used "objdump" again to read the raw instruction.
But since there is no need to disassemble and binary code can be read
directly from the DSO, third patchset (ie this patchset) uses below
apporach. The apporach preferred in powerpc to parse sample for data
type profiling in V3 patchset is:
- Read directly from DSO using dso__data_read_offset
- If that fails for any case, fallback to using libcapstone
- If libcapstone is not supported, approach will use objdump
Patchset adds support to pick the opcode and reg fields from this
raw/binary instruction code. This approach came in from review comment
by Segher Boessenkool and Christophe for the initial patchset.
Apart from that, instruction tracking is enabled for powerpc and
support function is added to find variables defined as registers
Example, in powerpc, below two registers are
defined to represent variable:
1. r13: represents local_paca
register struct paca_struct *local_paca asm("r13");
2. r1: represents stack_pointer
register void *__stack_pointer asm("r1");
These are handled in this patchset.
- Patch 1 is to rearrange register state type structures to header file
so that it can referred from other arch specific files
- Patch 2 is to make instruction tracking as a callback to"struct arch"
so that it can be implemented by other archs easily and defined in arch
specific files
- Patch 3 is to handle state type regs array size for x86 and powerpc
- Patch 4 adds support to capture and parse raw instruction in powerpc
using dso__data_read_offset utility
- Patch 4 also adds logic to support using objdump when doing default "perf
report" or "perf annotate" since it that needs disassembled instruction.
- Patch 5 adds disasm_line__parse to parse raw instruction for powerpc
- Patch 6 update parameters for reg extract functions to use raw
instruction on powerpc
- Patch 7 updates ins__find to carry raw_insn and also adds parse
callback for memory instructions for powerpc
- Patch 8 add support to identify memory instructions of opcode 31 in
powerpc
- Patch 9 adds more instructions to support instruction tracking in powerpc
- Patch 10 and 11 handles instruction tracking for powerpc.
- Patch 12, 13 and 14 add support to use libcapstone in powerpc
- Patch 15 and patch 16 handles support to find global register variables
- PAtch 17 updates data type compare functions data_type_cmp and
sort__typeoff_sort to include var_name along with type_name in
comparison.
- Patch 18 handles insn-stat option for perf annotate
Note:
- There are remaining unknowns (25%) as seen in annotate Instruction stats
below.
- This patchset is not tested on powerpc32. In next step of enhancements
along with handling remaining unknowns, plan to cover powerpc32 changes
based on how testing goes.
With the current patchset:
./perf record -a -e mem-loads sleep 1
./perf report -s type,typeoff --hierarchy --group --stdio
./perf annotate --data-type --insn-stat
perf annotate logs:
==================
Annotate Instruction stats
total 609, ok 446 (73.2%), bad 163 (26.8%)
Name/opcode : Good Bad
-----------------------------------------------------------
58 : 323 80
32 : 49 43
34 : 33 11
OP_31_XOP_LDX : 8 20
40 : 23 0
OP_31_XOP_LWARX : 5 1
OP_31_XOP_LWZX : 2 3
OP_31_XOP_LDARX : 3 0
33 : 0 2
OP_31_XOP_LBZX : 0 1
OP_31_XOP_LWAX : 0 1
OP_31_XOP_LHZX : 0 1
perf report logs:
=================
Total Lost Samples: 0
Samples: 1K of event 'mem-loads'
Event count (approx.): 937238
Overhead Data Type Data Type Offset
........ ......... ................
48.60% (unknown) (unknown) +0 (no field)
11.42% long unsigned int long unsigned int +0 (current_stack_pointer)
4.68% struct paca_struct struct paca_struct +2312 (__current)
4.57% struct paca_struct struct paca_struct +2354 (irq_soft_mask)
2.69% struct paca_struct struct paca_struct +2808 (canary)
2.68% struct paca_struct struct paca_struct +8 (paca_index)
2.24% struct paca_struct struct paca_struct +48 (data_offset)
1.43% long unsigned int long unsigned int +0 (no field)
1.41% struct vm_fault struct vm_fault +0 (vma)
1.29% struct task_struct struct task_struct +276 (flags)
1.03% struct pt_regs struct pt_regs +264 (user_regs.msr)
0.90% struct security_hook_list struct security_hook_list +0 (list.next)
0.76% struct irq_desc struct irq_desc +304 (irq_data.chip)
0.76% struct rq struct rq +2856 (cpu)
0.72% long long unsigned int long long unsigned int +0 (no field)
Thanks
Athira Rajeev
Changelog:
>From v6 -> v7:
- Addressed review comments from Namhyung
Changed format string space to %-20s while printing
instruction stats in patch 18.
Use cmp_null in patch 17 while comparing var_name to
properly sort with correct order.
>From v5 -> v6:
- Addressed review comments from Namhyung
Conditionally define TYPE_STATE_MAX_REGS based on arch.
Added macro for defining width of the raw codes and spaces
in disasm_line__parse_powerpc.
Call disasm_line__parse from disasm_line__parse_powerpc
for generic code.
Renamed symbol__disassemble_dso to symbol__disassemble_raw.
Fixed find_data_type_global_reg to correclty free var_types
and change indent level.
Fixed data_type_cmp and sort__typeoff_sort to include var_name
in comparing data type entries.
>From v4 -> v5:
- Addressed review comments from Namhyung
Handle max number of type state regs as 16 for x86 and 32 for
powerpc.
Added generic support for objdump patch first and DSO read
optimisation next
combined patch 3 and patch 4 in patchseries V4 to one patch
Changed reference for "raw_insn" to use "u32"
Splitted "parse" callback patch changes and "ins__find" patch
changes into two
Instead of making weak function, added get_powerpc_regs to
extract register and offset fields for powerpc
- Addressed complation fail when "dwarf.h" is not present ie
elfutils devel is not present. Used includes for #ifdef HAVE_DWARF_SUPPORT
when including functions that use Dwarf references. Also
conditionally include some of the header files.
>From v3->v4:
- Addressed review comments from Ian by using capston_init from
"util/print_insn.c" instead of "open_capston_handle".
- Addressed review comment from Namhyung by moving "opcode"
field from "struct ins" to "struct disasm_line"
>From v2->v3:
- Addressed review comments from Christophe and Namhyung for V2
- Changed the apporach in powerpc to parse sample for data
type profiling as:
Read directly from DSO using dso__data_read_offset
If that fails for any case, fallback to using libcapstone
If libcapstone is not supported, approach will use objdump
- Include instructions with opcode as 31 and correctly categorize
them as memory or arithmetic instructions.
- Include more instructions for instruction tracking in powerpc
>From v1->v2:
- Addressed suggestion from Christophe Leroy and Segher Boessenkool
to use the binary code (raw insn) to fetch opcode, register and
offset fields.
- Added support for instruction tracking in powerpc
- Find the register defined variables (r13 and r1 which points to
local_paca and current_stack_pointer in powerpc)
Athira Rajeev (18):
tools/perf: Move the data structures related to register type to
header file
tools/perf: Add "update_insn_state" callback function to handle arch
specific instruction tracking
tools/perf: Update TYPE_STATE_MAX_REGS to include max of regs in
powerpc
tools/perf: Add disasm_line__parse to parse raw instruction for
powerpc
tools/perf: Add support to capture and parse raw instruction in
powerpc using dso__data_read_offset utility
tools/perf: Update parameters for reg extract functions to use raw
instruction on powerpc
tools/perf: Add parse function for memory instructions in powerpc
tools/perf: Add support to identify memory instructions of opcode 31
in powerpc
tools/perf: Add some of the arithmetic instructions to support
instruction tracking in powerpc
tools/perf: Add more instructions for instruction tracking
tools/perf: Update instruction tracking for powerpc
tools/perf: Make capstone_init non-static so that it can be used
during symbol disassemble
tools/perf: Use capstone_init and remove open_capstone_handle from
disasm.c
tools/perf: Add support to use libcapstone in powerpc
tools/perf: Add support to find global register variables using
find_data_type_global_reg
tools/perf: Add support for global_die to capture name of variable in
case of register defined variable
tools/perf: Update data_type_cmp and sort__typeoff_sort function to
include var_name in comparison
tools/perf: Set instruction name to be used with insn-stat when using
raw instruction
tools/include/linux/string.h | 2 +
tools/lib/string.c | 13 +
tools/perf/arch/arm64/annotate/instructions.c | 3 +-
.../arch/loongarch/annotate/instructions.c | 6 +-
.../perf/arch/powerpc/annotate/instructions.c | 254 ++++++++
tools/perf/arch/powerpc/util/dwarf-regs.c | 53 ++
tools/perf/arch/s390/annotate/instructions.c | 5 +-
tools/perf/arch/x86/annotate/instructions.c | 377 ++++++++++++
tools/perf/builtin-annotate.c | 4 +-
tools/perf/util/annotate-data.c | 544 ++++--------------
tools/perf/util/annotate-data.h | 83 +++
tools/perf/util/annotate.c | 29 +-
tools/perf/util/annotate.h | 6 +-
tools/perf/util/disasm.c | 468 +++++++++++++--
tools/perf/util/disasm.h | 19 +-
tools/perf/util/dwarf-aux.c | 1 +
tools/perf/util/dwarf-aux.h | 1 +
tools/perf/util/include/dwarf-regs.h | 12 +
tools/perf/util/print_insn.c | 15 +-
tools/perf/util/print_insn.h | 5 +
tools/perf/util/sort.c | 25 +-
tools/perf/util/sort.h | 1 +
22 files changed, 1421 insertions(+), 505 deletions(-)
--
2.43.0