Re: [PATCH v5 25/27] ARM: dts: at91: sam9x7: add device tree for SoC

From: claudiu beznea
Date: Sun Jul 14 2024 - 09:44:39 EST

Next message: claudiu beznea: "Re: [PATCH v5 27/27] ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board"
Previous message: claudiu beznea: "Re: [PATCH v5 04/27] ARM: at91: pm: add support for sam9x7 SoC family"
Next in thread: Varshini.Rajendran: "Re: [PATCH v5 25/27] ARM: dts: at91: sam9x7: add device tree for SoC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi, Varshini,

On 03.07.2024 13:29, Varshini Rajendran wrote:
> Add device tree file for SAM9X7 SoC family.
>
> Co-developed-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
> Signed-off-by: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
> ---
> Changed in v5:
> - Sorted node properties according dts coding style.
> - Removed space before pwn status.
> - Fixed DT schema warnings related to usart.
> - Aligned <> braces.
> - Changed spaces to tabs.
> - Changed node names to generic names.
> - Corrected the typo in gpbr compatible.
> ---
> arch/arm/boot/dts/microchip/sam9x7.dtsi | 1226 +++++++++++++++++++++++
> 1 file changed, 1226 insertions(+)
> create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi
>
> diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
> new file mode 100644
> index 000000000000..0e3fb94f40b6
> --- /dev/null
> +++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
> @@ -0,0 +1,1226 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
> + *
> + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
> + */
> +
> +#include <dt-bindings/clock/at91.h>
> +#include <dt-bindings/dma/at91.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/mfd/at91-usart.h>
> +#include <dt-bindings/mfd/atmel-flexcom.h>
> +#include <dt-bindings/pinctrl/at91.h>
> +
> +/ {
> + model = "Microchip SAM9X7 SoC";
> + compatible = "microchip,sam9x7";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&aic>;
> +
> + aliases {
> + serial0 = &dbgu;
> + gpio0 = &pioA;
> + gpio1 = &pioB;
> + gpio2 = &pioC;
> + gpio3 = &pioD;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + compatible = "arm,arm926ej-s";
> + reg = <0>;
> + device_type = "cpu";
> + };
> + };
> +
> + clocks {
> + slow_xtal: clock-slowxtal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + main_xtal: clock-mainxtal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> + };
> +
> + sram: sram@300000 {
> + compatible = "mmio-sram";
> + reg = <0x300000 0x10000>;
> + ranges = <0 0x300000 0x10000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +
> + ahb {
> + compatible = "simple-bus";
> + ranges;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + sdmmc0: mmc@80000000 {
> + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
> + reg = <0x80000000 0x300>;
> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
> + clock-names = "hclock", "multclk";
> + assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
> + assigned-clock-rates = <100000000>;
> + status = "disabled";
> + };
> +
> + sdmmc1: mmc@90000000 {
> + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
> + reg = <0x90000000 0x300>;
> + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
> + clock-names = "hclock", "multclk";
> + assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
> + assigned-clock-rates = <100000000>;
> + status = "disabled";
> + };
> + };
> +
> + apb {
> + compatible = "simple-bus";
> + ranges;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + flx4: flexcom@f0000000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf0000000 0x200>;
> + ranges = <0x0 0xf0000000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> + status = "disabled";
> +
> + uart4: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;

According to dts coding style that vendor specific properties goes at the
end. I'll adjust it when applying, no need to resend for this. Valid for
all the uart flexcom nodes.

> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(8))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(9))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi4: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(8))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(9))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(8))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(9))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx5: flexcom@f0004000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf0004000 0x200>;
> + ranges = <0x0 0xf0004000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> + status = "disabled";
> +
> + uart5: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(10))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(11))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi5: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(10))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(11))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(10))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(11))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + dma0: dma-controller@f0008000 {
> + compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma";
> + reg = <0xf0008000 0x1000>;
> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
> + #dma-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
> + clock-names = "dma_clk";
> + status = "disabled";
> + };
> +
> + ssc: ssc@f0010000 {
> + compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc";
> + reg = <0xf0010000 0x4000>;
> + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
> + clock-names = "pclk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(38))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(39))>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2s: i2s@f001c000 {
> + compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
> + reg = <0xf001c000 0x100>;
> + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
> + clock-names = "pclk", "gclk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(36))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(37))>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + flx11: flexcom@f0020000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf0020000 0x200>;
> + ranges = <0x0 0xf0020000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> + status = "disabled";
> +
> + uart11: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(22))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(23))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c11: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(22))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(23))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx12: flexcom@f0024000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf0024000 0x200>;
> + ranges = <0x0 0xf0024000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> + status = "disabled";
> +
> + uart12: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(24))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(25))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c12: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(24))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(25))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + pit64b0: timer@f0028000 {
> + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
> + reg = <0xf0028000 0x100>;
> + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
> + clock-names = "pclk", "gclk";
> + };
> +
> + sha: crypto@f002c000 {
> + compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha";
> + reg = <0xf002c000 0x100>;
> + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
> + clock-names = "sha_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(34))>;
> + dma-names = "tx";
> + };
> +
> + trng: rng@f0030000 {
> + compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng";
> + reg = <0xf0030000 0x100>;
> + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
> + status = "disabled";
> + };
> +
> + aes: crypto@f0034000 {
> + compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes";
> + reg = <0xf0034000 0x100>;
> + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
> + clock-names = "aes_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(32))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(33))>;
> + dma-names = "tx", "rx";
> + };
> +
> + tdes: crypto@f0038000 {
> + compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes";
> + reg = <0xf0038000 0x100>;
> + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
> + clock-names = "tdes_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(31))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(30))>;
> + dma-names = "tx", "rx";
> + };
> +
> + classd: sound@f003c000 {
> + compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd";
> + reg = <0xf003c000 0x100>;
> + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
> + clock-names = "pclk", "gclk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(35))>;
> + dma-names = "tx";
> + status = "disabled";
> + };
> +
> + pit64b1: timer@f0040000 {
> + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
> + reg = <0xf0040000 0x100>;
> + interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
> + clock-names = "pclk", "gclk";
> + };
> +
> + can0: can@f8000000 {
> + compatible = "bosch,m_can";
> + reg = <0xf8000000 0x100>, <0x300000 0x7800>;
> + reg-names = "m_can", "message_ram";
> + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>,
> + <68 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "int0", "int1";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>;
> + clock-names = "hclk", "cclk";
> + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>;
> + assigned-clock-rates = <480000000>, <40000000>;
> + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
> + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
> + status = "disabled";
> + };
> +
> + can1: can@f8004000 {
> + compatible = "bosch,m_can";
> + reg = <0xf8004000 0x100>, <0x300000 0xbc00>;
> + reg-names = "m_can", "message_ram";
> + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>,
> + <69 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "int0", "int1";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>;
> + clock-names = "hclk", "cclk";
> + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>;
> + assigned-clock-rates = <480000000>, <40000000>;
> + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
> + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
> + status = "disabled";
> + };
> +
> + tcb: timer@f8008000 {
> + compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon";
> + reg = <0xf8008000 0x100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>;
> + clock-names = "t0_clk", "gclk", "slow_clk";
> + status = "disabled";
> + };
> +
> + flx6: flexcom@f8010000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8010000 0x200>;
> + ranges = <0x0 0xf8010000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> + status = "disabled";
> +
> + uart6: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(12))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(13))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c6: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(12))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(13))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx7: flexcom@f8014000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8014000 0x200>;
> + ranges = <0x0 0xf8014000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
> + status = "disabled";
> +
> + uart7: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(14))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(15))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c7: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(14))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(15))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx8: flexcom@f8018000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8018000 0x200>;
> + ranges = <0x0 0xf8018000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> + status = "disabled";
> +
> + uart8: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(16))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(17))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c8: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(16))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(17))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx0: flexcom@f801c000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf801c000 0x200>;
> + ranges = <0x0 0xf801c000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> + status = "disabled";
> +
> + uart0: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(0))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(1))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi0: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(0))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(1))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(0))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(1))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx1: flexcom@f8020000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8020000 0x200>;
> + ranges = <0x0 0xf8020000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> + status = "disabled";
> +
> + uart1: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(2))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(3))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi1: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(2))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(3))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(2))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(3))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx2: flexcom@f8024000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8024000 0x200>;
> + ranges = <0x0 0xf8024000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> + status = "disabled";
> +
> + uart2: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(4))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(5))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi2: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(4))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(5))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(4))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(5))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx3: flexcom@f8028000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8028000 0x200>;
> + ranges = <0x0 0xf8028000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> + status = "disabled";
> +
> + uart3: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(6))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(7))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi3: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(6))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(7))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(6))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(7))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + gmac: ethernet@f802c000 {
> + compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem";
> + reg = <0xf802c000 0x1000>;
> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 0 */
> + <60 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 1 */
> + <61 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 2 */
> + <62 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 3 */
> + <63 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 4 */
> + <64 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 5 */
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>;
> + clock-names = "hclk", "pclk", "tx_clk", "tsu_clk";
> + assigned-clocks = <&pmc PMC_TYPE_GCK 67>;

Is this needed?

> + status = "disabled";
> + };
> +
> + pwm0: pwm@f8034000 {
> + compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm";
> + reg = <0xf8034000 0x300>;
> + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + flx9: flexcom@f8040000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8040000 0x200>;
> + ranges = <0x0 0xf8040000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
> + status = "disabled";
> +
> + uart9: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(18))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(19))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c9: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(18))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(19))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx10: flexcom@f8044000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8044000 0x200>;
> + ranges = <0x0 0xf8044000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> + status = "disabled";
> +
> + uart10: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> + clock-names = "usart";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(20))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(21))>;
> + dma-names = "tx", "rx";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c10: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(20))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(21))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + sfr: sfr@f8050000 {
> + compatible = "microchip,sam9x7-sfr", "microchip,sam9x60-sfr", "syscon";
> + reg = <0xf8050000 0x100>;
> + };
> +
> + matrix: matrix@ffffde00 {
> + compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
> + reg = <0xffffde00 0x200>;
> + };
> +
> + pmecc: ecc-engine@ffffe000 {
> + compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc";
> + reg = <0xffffe000 0x300>, <0xffffe600 0x100>;
> + };
> +
> + mpddrc: mpddrc@ffffe800 {
> + compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc";
> + reg = <0xffffe800 0x200>;
> + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
> + clock-names = "ddrck", "mpddr";
> + };
> +
> + smc: smc@ffffea00 {
> + compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon";
> + reg = <0xffffea00 0x100>;
> + };
> +
> + aic: interrupt-controller@fffff100 {
> + compatible = "microchip,sam9x7-aic", "microchip,sam9x60-aic";
> + reg = <0xfffff100 0x100>;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + atmel,external-irqs = <31>;
> + microchip,nr-irqs = <70>;

Ah, this needs to be clarified before applying.

> + };
> +
> + dbgu: serial@fffff200 {
> + compatible = "microchip,sam9x7-dbgu", "atmel,at91sam9260-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0xfffff200 0x200>;
> + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
> + clock-names = "usart";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(28))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(29))>;
> + dma-names = "tx", "rx";
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + status = "disabled";
> + };
> +
> + pinctrl: pinctrl@fffff400 {
> + compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd";
> + ranges = <0xfffff400 0xfffff400 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + /* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */
> + atmel,mux-mask = <
> + /* A B C D */
> + 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000 /* pioA */
> + 0x07ffffff 0x0805fe7f 0x01ff9f81 0x06078000 /* pioB */
> + 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000 /* pioC */
> + 0x00003fff 0x00003fe0 0x0000003f 0x00000000 /* pioD */
> + >;
> +
> + pioA: gpio@fffff400 {
> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffff400 0x200>;
> + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + #gpio-cells = <2>;
> + gpio-controller;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
> + };
> +
> + pioB: gpio@fffff600 {
> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffff600 0x200>;
> + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + #gpio-cells = <2>;
> + gpio-controller;
> + #gpio-lines = <26>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
> + };
> +
> + pioC: gpio@fffff800 {
> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffff800 0x200>;
> + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + #gpio-cells = <2>;
> + gpio-controller;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
> + };
> +
> + pioD: gpio@fffffa00 {
> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffffa00 0x200>;
> + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + #gpio-cells = <2>;
> + gpio-controller;
> + #gpio-lines = <22>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
> + };
> + };
> +
> + pmc: clock-controller@fffffc00 {
> + compatible = "microchip,sam9x7-pmc", "syscon";
> + reg = <0xfffffc00 0x200>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + #clock-cells = <2>;
> + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
> + clock-names = "td_slck", "md_slck", "main_xtal";
> + };
> +
> + reset_controller: reset-controller@fffffe00 {
> + compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc";
> + reg = <0xfffffe00 0x10>;
> + clocks = <&clk32k 0>;
> + };
> +
> + poweroff: poweroff@fffffe10 {
> + compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc";
> + reg = <0xfffffe10 0x10>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&clk32k 0>;
> + atmel,wakeup-rtc-timer;
> + atmel,wakeup-rtt-timer;
> + status = "disabled";
> + };
> +
> + rtt: rtc@fffffe20 {
> + compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt";
> + reg = <0xfffffe20 0x20>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&clk32k 0>;
> + };
> +
> + clk32k: clock-controller@fffffe50 {
> + compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc";
> + reg = <0xfffffe50 0x4>;
> + clocks = <&slow_xtal>;
> + #clock-cells = <1>;
> + };
> +
> + gpbr: syscon@fffffe60 {
> + compatible = "microchip,sam9x7-gpbr", "atmel,at91sam9260-gpbr", "syscon";
> + reg = <0xfffffe60 0x10>;
> + };
> +
> + rtc: rtc@fffffea8 {
> + compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc";
> + reg = <0xfffffea8 0x100>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&clk32k 0>;
> + };
> +
> + watchdog: watchdog@ffffff80 {
> + compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt";
> + reg = <0xffffff80 0x24>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + status = "disabled";
> + };
> + };
> +};

Next message: claudiu beznea: "Re: [PATCH v5 27/27] ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board"
Previous message: claudiu beznea: "Re: [PATCH v5 04/27] ARM: at91: pm: add support for sam9x7 SoC family"
Next in thread: Varshini.Rajendran: "Re: [PATCH v5 25/27] ARM: dts: at91: sam9x7: add device tree for SoC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]